Study in Pictures🌐 English (United States)
Welding Inspector Exam Illustrated

Digital book in PDF · read it on your phone or print it

Welding Inspector Exam Illustrated

Weld and NDE symbols, the five joint types, discontinuities in cross-section, gauge readings, E7018, polarity, WPS and PQR, the D1.1 clause map. Each topic has its own page: first the drawing, then what you need to remember.

  • 67 illustrated pages
  • English
  • 30-day guarantee
US$ 27US$ 63
Get the book · US$ 27

Price shown for: United States. In other countries, the checkout shows the price that applies there.

About this book

What it is

Weld and NDE symbols, the five joint types, discontinuities in cross-section, gauge readings, E7018, polarity, WPS and PQR, the D1.1 clause map. Each topic has its own page: first the drawing, then what you need to remember.

Who This Book Is For
  • You're moving into inspection
  • Your exam date is close
  • You already work in QA/QC
What it covers
  1. The CWI Exam and the Inspector's Job
  2. Joints, Positions and Weld Anatomy
  3. Weld and NDE Symbols (AWS A2.4)
  4. Discontinuities in Cross-Section
  5. Gauges and the Part B Practical
  6. Processes, Metals and Testing (Part A)
  7. The Code Book and Qualification (Part C)
  8. Final Review
Language
English (United States)
Pages
67
Format
Digital book in PDF · read it on your phone or print it
Price
US$ 27 (United States)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

Part A 150 questions · Part B 46 questions · Part C 50–65 questions · 72% on each
Part A 150 questions · Part B 46 questions · Part C 50–65 questions · 72% on each
Butt, corner, T, lap and edge: a T-joint can take a fillet or a groove weld.
Butt, corner, T, lap and edge: a T-joint can take a fillet or a groove weld.
Reference line, arrow, weld symbol, dimensions, supplementary symbols and tail: one drawing, every element labeled.
Reference line, arrow, weld symbol, dimensions, supplementary symbols and tail: one drawing, every element labeled.
Scattered, cluster, linear and piping porosity per AWS B1.10, plus their common causes.
Scattered, cluster, linear and piping porosity per AWS B1.10, plus their common causes.
1/8 to 1/64 in, counted line by line: 5/16 in = 0.3125 in
1/8 to 1/64 in, counted line by line: 5/16 in = 0.3125 in
E7018: 70 ksi, all positions, low-hydrogen, AC or DCEP — and 4 hours out of the oven.
E7018: 70 ksi, all positions, low-hydrogen, AC or DCEP — and 4 hours out of the oven.
D1.1 clause map: 5 prequalification, 6 qualification, 7 fabrication, 8 inspection
D1.1 clause map: 5 prequalification, 6 qualification, 7 fabrication, 8 inspection
Below the line = arrow side · throat = 0.707 × leg · concave fillet: gauge the throat
Below the line = arrow side · throat = 0.707 × leg · concave fillet: gauge the throat

Take a Look at the 8 Parts and 63 Topics

The CWI Exam and the Inspector's Job

pp. 5-9
  1. Three Parts, One Plan
  2. Before, During and After Welding
  3. Code, Specification, Standard, Guide
  4. Discontinuity vs. Defect
  5. Safety on the Inspection Floor

Joints, Positions and Weld Anatomy

pp. 10-16
  1. The Five Joint Types
  2. Groove Weld Types
  3. Groove Joint Anatomy
  4. Plate Positions: 1G–4G and 1F–4F
  5. Pipe Positions: 1G, 2G, 5G, 6G, 6GR
  6. Fillet Weld Anatomy
  7. Groove Weld Anatomy

Weld and NDE Symbols (AWS A2.4)

pp. 17-27
  1. Every Element Has a Fixed Place
  2. Arrow Side vs. Other Side
  3. Read Every Symbol in the Same Order
  4. Fillet Weld Dimensions
  5. Groove Weld Dimensions
  6. The Broken Arrow
  7. Supplementary Symbols
  8. Contour and Finish
  9. Plug, Slot, Spot and Seam
  10. Tail and Multiple Reference Lines
  11. NDE Symbols

Discontinuities in Cross-Section

pp. 28-38
  1. Porosity: Four Patterns
  2. Slag and Tungsten Inclusions
  3. Incomplete Fusion
  4. Incomplete Joint Penetration
  5. Undercut vs. Underfill
  6. Overlap
  7. Cracks by Location
  8. Hot Cracks vs. Cold Cracks
  9. Lamellar Tearing
  10. Arc Strikes, Spatter and Burn-Through
  11. Weld Profile and Fit-Up Problems

Gauges and the Part B Practical

pp. 39-46
  1. Reading a Steel Rule
  2. Reading a Dial Caliper
  3. Fillet Weld Gauge: Convex vs. Concave
  4. The V-WAC Gauge
  5. The Bridge Cam Gauge
  6. The Hi-Lo Gauge
  7. Visual Examination Conditions
  8. Part B Workflow

Processes, Metals and Testing (Part A)

pp. 47-57
  1. SMAW and Decoding E7018
  2. GMAW and Transfer Modes
  3. FCAW and GTAW
  4. SAW and Thermal Cutting
  5. Polarity: DCEP, DCEN and AC
  6. Heat Input
  7. HAZ, Preheat and Interpass
  8. The Tensile Test
  9. Bend, Impact and Hardness Tests
  10. Surface NDE: PT and MT
  11. Volumetric NDE: UT and RT

The Code Book and Qualification (Part C)

pp. 58-64
  1. The D1.1 Map
  2. Finding a Table in Under a Minute
  3. Prequalified Joints
  4. WPS, PQR and WPQ
  5. Essential Variables
  6. What a Welder Test Qualifies
  7. Reading the Visual Acceptance Table

Final Review

pp. 65-67
  1. The Mix-Ups That Cost Points
  2. One-Page Symbol Routine
  3. Exam-Week Checklist

Who This Book Is For

You're moving into inspection

Years of welding already taught you the joint. The book adds what the inspector exam asks: symbols, discontinuities, gauges and the code book, one page each.

Your exam date is close

Review a full part in one sitting and go back to the exact page you need: the gauge you're unsure of, the symbol that keeps flipping, the D1.1 clause map.

You already work in QA/QC

If you've never struck an arc, every discontinuity is drawn in cross-section next to its common causes, so you see what you're inspecting.

Plus: 2 Free Books

Part A & Part C Practice Questions
BONUS 1

Part A & Part C Practice Questions

Exam-style questions on fundamentals and code book navigation, each with the answer explained, so you test yourself before exam day and see why each answer is right.

Common Inspector Mistakes: Quick Review Cards
BONUS 2

Common Inspector Mistakes: Quick Review Cards

The mix-ups that trip people up most often (arrow side vs. other side, leg vs. throat, incomplete fusion vs. incomplete penetration) on one-page cards you can review in minutes.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've been welding for years and now want to inspect?

Yes. It isn't a welding course: it covers what the inspector exam asks, from symbols and discontinuities to gauges and the code book. It also works if you come from QA/QC and have never welded.

Where does the content come from?

From AWS QC1 and the AWS publications in the CWI Body of Knowledge: A2.4, A3.0, B1.10, B1.11 and D1.1/D1.1M. Every page is checked against them. The D1.1 map uses the current clause numbering: Clause 5 prequalification, 6 qualification, 7 fabrication, 8 inspection. If your code book shows the same numbers, the map matches it. The book doesn't reproduce the code text, so for Part C you still need your own code book, in the edition your exam uses.

Is this official AWS material?

No. It's independent study material, not affiliated with or endorsed by the American Welding Society. It doesn't give you a certificate or credit hours: the CWI certification comes only from AWS, after you pass the exam.

Does it replace a CWI seminar or course?

No. It's for studying and reviewing alongside your seminar, your course or the official publications. For Part B it shows how each gauge sits and how to read it, drawn the way you hold it. You still practice with real gauges and weld samples.

Are the practice questions the real exam questions?

No. They're written for this book, in the style of Part A and Part C, and each one comes with the answer explained.

When and how do I get it?

The book and the 2 bonus books arrive as PDFs by email, at the address you enter at checkout.

Do I have to pay every month?

No. It's a one-time payment.

Can I have it on paper?

Yes. It's a PDF you can print at home or at a print shop and keep at the shop.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

US$ 27US$ 63
Get the book · US$ 27

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

CNC Machining Illustrated

CNC turning and milling, one topic per illustrated page: machine zero vs. work zero, tool offsets, G90 vs. G91, the…

From US$ 27 US$ 63

NDT Illustrated: MT & PT

Magnetic particle and liquid penetrant testing, one topic per page, each with a big clear drawing: the 6 PT steps…

From US$ 27 US$ 63

Quality Inspector Illustrated

Quality inspection explained one topic per page, every concept drawn: calipers, micrometers and gages, blueprints and…

From US$ 27 US$ 63