Study in Pictures🌐 English (United States)
Coating Inspector Level 1 Illustrated

Digital book in PDF · read it on your phone or print it

Coating Inspector Level 1 Illustrated

Dew point, surface prep grades, profile in mils, soluble salts, wet and dry film thickness, adhesion, holiday testing and the defects you'll be asked to name. Each topic gets its own page: the drawing first, then what you need to remember.

  • 77 illustrated pages
  • English
  • 30-day guarantee
US$ 37US$ 87
Get the book · US$ 37

Price shown for: United States. In other countries, the checkout shows the price that applies there.

About this book

What it is

Dew point, surface prep grades, profile in mils, soluble salts, wet and dry film thickness, adhesion, holiday testing and the defects you'll be asked to name. Each topic gets its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're signed up for Level 1
  • Your course week is close
  • You already inspect on the job
What it covers
  1. The Inspector's Job
  2. Why Steel Rusts and How Coatings Stop It
  3. Checkpoint 1: The Weather
  4. Checkpoint 2: The Surface
  5. Checkpoint 3: Mixing and Application
  6. Checkpoints 4 and 5: Wet and Dry Film
  7. Checkpoint 6: Adhesion, Holidays and Cure
  8. Defects You'll Be Asked to Name
  9. Concrete, Records and Review
Language
English (United States)
Pages
77
Format
Digital book in PDF · read it on your phone or print it
Price
US$ 37 (United States)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

Applicator vs. inspector: 4 verbs that define the inspector's job
Applicator vs. inspector: 4 verbs that define the inspector's job
Anode, cathode, electrolyte, metallic path: one water droplet shows the whole corrosion cell.
Anode, cathode, electrolyte, metallic path: one water droplet shows the whole corrosion cell.
Steel at or below the dew point gets a water film, visible or not.
Steel at or below the dew point gets a water film, visible or not.
SP 1 removes oil and grease, never rust or mill scale, and always goes first.
SP 1 removes oil and grease, never rust or mill scale, and always goes first.
Product, color, both batch numbers, expiry and storage temperature: checked and written down first.
Product, color, both batch numbers, expiry and storage temperature: checked and written down first.
Verify with certified standards or shims at shift start and end
Verify with certified standards or shims at shift start and end
Wet sponge holiday test: 9–90 V DC, films up to 20 mils, voltage per spec
Wet sponge holiday test: 9–90 V DC, films up to 20 mils, voltage per spec
Run, sag, curtain: three sizes of the same problem, too much wet film.
Run, sag, curtain: three sizes of the same problem, too much wet film.

Take a Look at the 9 Parts and 72 Topics

The Inspector's Job

pp. 6-11
  1. From Applicator to Inspector: What Changes
  2. The Spec, the Data Sheet and Who Wins
  3. The Inspection Timeline: 7 Checkpoints
  4. Your Kit Bag, Instrument by Instrument
  5. Calibration vs. Verification
  6. Safety Before Any Reading

Why Steel Rusts and How Coatings Stop It

pp. 12-16
  1. The Corrosion Cell in 4 Parts
  2. 3 Ways a Coating Protects
  3. How Coatings Cure: 5 Mechanisms
  4. Generic Coating Types at a Glance
  5. The Coating System: Primer, Intermediate, Topcoat

Checkpoint 1: The Weather

pp. 17-23
  1. Dew Point in One Drawing
  2. The Sling Psychrometer, Step by Step
  3. From Wet Bulb to Dew Point
  4. The 5 °F Rule
  5. Steel Temperature: Where You Measure Matters
  6. Relative Humidity and Data Sheet Limits
  7. When and How Often to Take Readings

Checkpoint 2: The Surface

pp. 24-37
  1. Solvent Cleaning First: SP 1
  2. Initial Rust Grades A, B, C, D
  3. Hand and Power Tool Cleaning: SP 2, SP 3, SP 15, SP 11
  4. The Blast Grades Ladder
  5. Using the Visual Guides Without Fooling Yourself
  6. Waterjetting Grades WJ-1 to WJ-4
  7. Flash Rust: Light, Medium, Heavy
  8. Abrasive and Air: The Blotter and Vial Tests
  9. What Surface Profile Is
  10. Measuring Profile: Comparator, Depth Gauge, Replica Tape
  11. Replica Tape, Done Right
  12. Soluble Salts: The Invisible Contaminant
  13. The Bresle Patch Test in 5 Steps
  14. Dust on the Surface: The Tape Test

Checkpoint 3: Mixing and Application

pp. 38-44
  1. Before You Open the Can
  2. Mixing Two-Part Coatings
  3. Pot Life and Thinning
  4. Application Methods at a Glance
  5. Reading an Airless Tip Number
  6. Stripe Coating Edges and Welds
  7. Recoat Windows

Checkpoints 4 and 5: Wet and Dry Film

pp. 45-55
  1. The Wet Film Comb
  2. Volume Solids: Wet Becomes Dry
  3. Target WFT With Thinner Added
  4. Theoretical Coverage: The 1,604 Number
  5. DFT Gauges: Type 1 and Type 2
  6. Verifying the Gauge Before You Read
  7. Gauge Reading, Spot, Area
  8. How Many Areas to Measure
  9. The 80/120 Rule for Spots
  10. Working Out a DFT Spot Average
  11. Measuring Each Coat vs. the Whole System

Checkpoint 6: Adhesion, Holidays and Cure

pp. 56-61
  1. Tape Adhesion: X-Cut or Cross-Hatch
  2. Pull-Off Adhesion
  3. Holidays and Why They Matter
  4. Low-Voltage Wet Sponge
  5. High-Voltage Spark Testing
  6. Is It Cured? MEK Rub and Hardness

Defects You'll Be Asked to Name

pp. 62-70
  1. Runs, Sags and Curtains
  2. Dry Spray and Overspray
  3. Orange Peel
  4. Pinholes, Fish Eyes and Craters
  5. Blistering
  6. Mudcracking and Cracking
  7. Amine Blush
  8. Lifting, Wrinkling and Delamination
  9. Undercutting and Rust Creep

Concrete, Records and Review

pp. 71-77
  1. Coating Concrete: Surface Prep and Profile
  2. Moisture in Concrete: 3 Tests
  3. The Daily Inspection Report
  4. Writing a Nonconformance
  5. The Whole Job on One Page
  6. Numbers to Have at Hand
  7. Most Common Inspector Mistakes

Who This Book Is For

You're signed up for Level 1

You get the whole course in order before day one: what gets measured, with which instrument and in what sequence.

Your course week is close

You review dew point, DFT averages and adhesion ratings one page at a time, and the practice questions show you where to go back.

You already inspect on the job

You print the pages you need and keep them in your gear bag: the 5 °F rule, the wet film comb, the defects drawn.

Plus: 2 Free Books

Coating Inspector Exam-Style Practice Questions
BONUS 1

Coating Inspector Exam-Style Practice Questions

Practice questions in the style of the theory exam, each with the answer and the page to go back to, so you find your weak spots before the course does.

15 Common Inspection Mistakes: Quick-Reference Cards
BONUS 2

15 Common Inspection Mistakes: Quick-Reference Cards

The most frequent mistakes on site and in class, drawn before and after on printable cards you can keep in your kit bag.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've been painting or blasting steel for years?

Yes. It doesn't teach you how to hold a spray gun: it puts the standards, grades and numbers in order for someone who already knows the work. US units throughout: mils and °F.

Where does the content come from?

It's checked against the current editions of the standards used in Level 1 coating inspector training in the US: the joint SSPC/AMPP surface prep standards, the SSPC visual guides, SSPC-PA 2 for DFT and the ASTM test methods. Everything is explained in our own words and drawings.

Is this official course material? Do I get a certificate?

No. It's an independent illustrated study book, not affiliated with or endorsed by any certifying body. It doesn't give you a certificate or course credit: certification comes only from your course and its exams.

Does it replace the course?

No. It helps you arrive prepared and review afterwards. The course, the hands-on training and the project spec always come first.

Are the practice questions the ones on the exam?

No. They're written for this book, in the style of a theory exam, each with the answer and the page to go back to.

When and how do I get it?

The book and the 2 bonus books come as PDFs by email, to the address you enter at checkout.

Do I have to pay every month?

No. It's a one-time payment.

Can I have it on paper?

Yes. The PDF is made to print: print the whole book or just the pages you want in your gear bag.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

US$ 37US$ 87
Get the book · US$ 37

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Welding Inspector Exam Illustrated

Prepare for the AWS CWI exam with 67 illustrated pages, one topic per page: weld and NDE symbols decoded one by one…

From US$ 27 US$ 63

CNC Machining Illustrated

CNC turning and milling, one topic per illustrated page: machine zero vs. work zero, tool offsets, G90 vs. G91, the…

From US$ 27 US$ 63

NDT Illustrated: MT & PT

Magnetic particle and liquid penetrant testing, one topic per page, each with a big clear drawing: the 6 PT steps…

From US$ 27 US$ 63

Quality Inspector Illustrated

Quality inspection explained one topic per page, every concept drawn: calipers, micrometers and gages, blueprints and…

From US$ 27 US$ 63