Study in Pictures🌐 English (United States)
CNC Machining Illustrated

Digital book in PDF · read it on your phone or print it

CNC Machining Illustrated

For operators moving up to setups and adults in a machining program, mill and lathe. Work zero, tool offsets, G-code line by line, drilling cycles and SFM to RPM. Every topic gets its own page: the drawing first, then the numbers to remember.

  • 68 illustrated pages
  • English
  • 30-day guarantee
US$ 27US$ 63
Get the book · US$ 27

Price shown for: United States. In other countries, the checkout shows the price that applies there.

About this book

What it is

For operators moving up to setups and adults in a machining program, mill and lathe. Work zero, tool offsets, G-code line by line, drilling cycles and SFM to RPM. Every topic gets its own page: the drawing first, then the numbers to remember.

Who This Book Is For
  • You're in a machining program
  • Your evaluation or credential is coming up
  • You already work in the shop
What it covers
  1. The Machine and Its Axes
  2. Offsets and Setup
  3. Reading a Program Line by Line
  4. Canned Cycles
  5. Speeds and Feeds with Worked Math
  6. Tooling, Workholding and Measuring
  7. Blueprint Basics
  8. Safety and the First Part
  9. Review and Quick Check
Language
English (United States)
Pages
68
Format
Digital book in PDF · read it on your phone or print it
Price
US$ 27 (United States)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

Lathe: part spins, X is a diameter. Mill: tool spins, table moves X/Y.
Lathe: part spins, X is a diameter. Mill: tool spins, table moves X/Y.
Edge finder with a 0.200 in tip: the spindle is 0.100 in from the edge when it kicks.
Edge finder with a 0.200 in tip: the spindle is 0.100 in from the edge when it kicks.
G00 = rapid, may be a dogleg; G01 = straight line at feed F.
G00 = rapid, may be a dogleg; G01 = straight line at feed F.
G81 straight, G83 full retract per peck, G73 short retract, G80 cancels.
G81 straight, G83 full retract per peck, G73 short retract, G80 cancels.
SFM = (π × D × RPM) ÷ 12: the edge speed, drawn as an unrolled ribbon.
SFM = (π × D × RPM) ÷ 12: the edge speed, drawn as an unrolled ribbon.
3-jaw chuck, soft jaws, collets, and tailstock support past about 3 × diameter.
3-jaw chuck, soft jaws, collets, and tailstock support past about 3 × diameter.
125, 63 and 32 µin Ra (≈3.2, 1.6, 0.8 µm) and the three settings that change finish
125, 63 and 32 µin Ra (≈3.2, 1.6, 0.8 µm) and the three settings that change finish
Part clamped, tools, H and D, G54, doors, rapid at 25 %, hand on Feed Hold.
Part clamped, tools, H and D, G54, doors, rapid at 25 %, hand on Feed Hold.

Take a Look at the 9 Parts and 64 Topics

The Machine and Its Axes

pp. 5-12
  1. Lathe vs. Mill: What Moves
  2. Axis Directions: Which Way Is Plus
  3. The Control Panel and Its Modes
  4. Overrides: Feed, Rapid and Spindle
  5. Machine Zero: Where the Machine Starts Counting
  6. Work Zero: Where You Start Counting
  7. Machine Zero vs. Work Zero on the Same Part
  8. The Position Screens: Which Number to Watch

Offsets and Setup

pp. 13-21
  1. Setting X and Y with an Edge Finder
  2. Setting Z on a Mill: Tool Setter, Paper or Block
  3. Tool Length Offset: G43 H
  4. Cutter Radius Compensation: G41, G42, G40
  5. Setting Work Zero on a Lathe
  6. Geometry vs. Wear Offsets
  7. Nose Radius and Tip Direction on the Lathe
  8. Fixing Size on a Mill with Wear
  9. The Safe First Run: Single Block and Dry Run

Reading a Program Line by Line

pp. 22-32
  1. Anatomy of a Program
  2. The Safe Start Line
  3. Modal vs. One-Shot Codes
  4. G00 vs. G01: Rapid and Cutting Feed
  5. G90 vs. G91: Absolute and Incremental
  6. Arcs with R: G02 and G03
  7. Arcs with I, J and K
  8. Planes: G17, G18, G19
  9. The M-Codes You See Every Day
  10. Reading a Mill Program, Line by Line
  11. Lathe Speed Codes: G96, G97 and G50

Canned Cycles

pp. 33-37
  1. Drilling Cycles: G81, G83 and G73
  2. G98 vs. G99: Where the Tool Returns
  3. Tapping with G84
  4. Lathe Roughing and Finishing: G71 and G70
  5. Subprograms: M98 and M99

Speeds and Feeds with Worked Math

pp. 38-46
  1. What SFM Really Means
  2. From SFM to RPM
  3. From Chip Load to IPM
  4. Chip Load: Too Little, Too Much
  5. Lathe Feed: Inches per Revolution
  6. Drilling Speeds and Feeds
  7. Depth of Cut and Stepover
  8. Reading Chips and Sound
  9. Inch and Metric Without Getting Lost

Tooling, Workholding and Measuring

pp. 47-54
  1. End Mills: Flutes, Material and Climb vs. Conventional
  2. Drills, Spot Drills and Taps
  3. Reading a Lathe Insert Code
  4. Toolholders, Collets and Stickout
  5. Squaring the Vise and Using Parallels
  6. Lathe Workholding: Chucks, Soft Jaws and Tailstock
  7. Reading Calipers and Micrometers
  8. Indicators: Dial Test vs. Plunger

Blueprint Basics

pp. 55-59
  1. Title Block and Views
  2. Tolerances: Limits, Bilateral and Title-Block Defaults
  3. Thread and Hole Callouts
  4. GD&T Basics: The Feature Control Frame
  5. Surface Finish Symbols

Safety and the First Part

pp. 60-63
  1. Before You Press Cycle Start
  2. The Most Frequent Crash Causes
  3. Guarding and PPE on the Shop Floor
  4. First-Article Inspection

Review and Quick Check

pp. 64-68
  1. The Setup in 8 Steps
  2. Every Formula on One Page
  3. The Codes on One Page
  4. Frequent Mistakes and How to Catch Them
  5. Self-Check: 10 Questions with Answers

Who This Book Is For

You're in a machining program

Every class topic has its own drawn page: offsets, G-code, speeds and feeds. You review in the same order every time, without digging through the textbook.

Your evaluation or credential is coming up

The formulas, the codes and the setup steps are on one page each at the end. You check what you know, and the practice questions show where you went wrong.

You already work in the shop

You know how to cut metal. The book shows you where each number lives on the control, so you can take on the setup yourself. Print it and keep it at the machine.

Plus: 2 Free Books

CNC Practice Questions: Exam-Style, with Answers
BONUS 1

CNC Practice Questions: Exam-Style, with Answers

Test yourself on offsets, G- and M-codes, arcs and speeds-and-feeds math, with every answer worked out step by step so you can see where you went wrong.

CNC Quick-Reference Cards
BONUS 2

CNC Quick-Reference Cards

The G-codes, M-codes, formulas and the most common setup mistakes on printable cards you can keep at the machine and check in a glance.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've been running machines for years?

Yes. It doesn't teach you to cut metal; it shows where things live on a CNC: work zero, offsets, each line of a program, the speeds-and-feeds math. If you're moving from manual or from loading parts to doing setups, that's what it covers.

Where does the content come from?

From ASME Y14.5-2018 for drawings and tolerances, OSHA 29 CFR 1910.212 for machine guarding, and the NIMS Level I skill standards for CNC mill and lathe. The codes follow standard Fanuc-style G-code, and the book points out where controls differ so you check your own control's manual.

Is this official material?

No. It's an independent study book. It isn't issued or endorsed by any credentialing body, agency or machine or control manufacturer, and it doesn't come with a certificate or count toward one.

Does it replace my training program or shop training?

No. It's for studying and reviewing. It doesn't replace your program, your shop's training, OSHA rules or your machine's manual.

Are the practice questions the ones on the exam?

No. They're written for this book, to practice offsets, codes, arcs and speeds-and-feeds math, with every answer worked out. They aren't official questions from any exam or credential.

When and how do I get it?

As a PDF by email, at the address you enter at checkout. The 2 bonus books come with it.

Will it work with the control in my shop?

The codes follow standard Fanuc-style G-code, the kind most CNC mills and lathes in US shops read. Where controls commonly differ, like lathe code groups, peck retract and tapping, the book points it out so you check your own control's manual. Conversational programming isn't covered. One-time payment, no subscription.

Can I have it on paper?

Yes. It's a PDF you can print at home or at a print shop and keep next to the machine.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

US$ 27US$ 63
Get the book · US$ 27

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Welding Inspector Exam Illustrated

Prepare for the AWS CWI exam with 67 illustrated pages, one topic per page: weld and NDE symbols decoded one by one…

From US$ 27 US$ 63

NDT Illustrated: MT & PT

Magnetic particle and liquid penetrant testing, one topic per page, each with a big clear drawing: the 6 PT steps…

From US$ 27 US$ 63

Quality Inspector Illustrated

Quality inspection explained one topic per page, every concept drawn: calipers, micrometers and gages, blueprints and…

From US$ 27 US$ 63