Study in Pictures🌐 English (United States)
NDT Illustrated: MT & PT

Digital book in PDF · read it on your phone or print it

NDT Illustrated: MT & PT

Pick MT or PT at a glance, place the yoke shots, run the six PT steps in order and sort every indication with the same three questions. Every topic has its own page: first the drawing, then the numbers to remember.

  • 64 illustrated pages
  • English
  • 30-day guarantee
US$ 27US$ 63
Get the book · US$ 27

Price shown for: United States. In other countries, the checkout shows the price that applies there.

About this book

What it is

Pick MT or PT at a glance, place the yoke shots, run the six PT steps in order and sort every indication with the same three questions. Every topic has its own page: first the drawing, then the numbers to remember.

Who This Book Is For
  • You're in your company's NDT training
  • Your Level I or II exam is coming up
  • You already inspect with a yoke or a PT kit
What it covers
  1. Before You Start: The Job and the Exam
  2. Discontinuities: What You're Hunting
  3. MT: How Magnetism Finds Cracks
  4. MT on the Job: Equipment and Technique
  5. PT: The Six Steps
  6. PT: Methods, Materials and Controls
  7. Reading Indications
  8. Exam Day and Review
Language
English (United States)
Pages
64
Format
Digital book in PDF · read it on your phone or print it
Price
US$ 27 (United States)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

Level I tests by instruction · Level II calibrates and interprets · Level III sets procedures.
Level I tests by instruction · Level II calibrates and interprets · Level III sets procedures.
Defect = a discontinuity that fails the acceptance criteria (ASTM E1316 terminology).
Defect = a discontinuity that fails the acceptance criteria (ASTM E1316 terminology).
MT only on ferromagnetic metal: most 304/316 stainless, aluminum, copper and titanium go to PT.
MT only on ferromagnetic metal: most 304/316 stainless, aluminum, copper and titanium go to PT.
Head shot: 300–800 A per inch of OD (ASME). Central conductor also reaches the inside surface.
Head shot: 300–800 A per inch of OD (ASME). Central conductor also reaches the inside surface.
PT in six panels: clean, penetrant, dwell, remove excess, dry and develop by developer type, inspect, then post-clean.
PT in six panels: clean, penetrant, dwell, remove excess, dry and develop by developer type, inspect, then post-clean.
Type I fluorescent under UV-A · Type II visible red under white light · per ASTM E165 and E1417
Type I fluorescent under UV-A · Type II visible red under white light · per ASTM E165 and E1417
False → non-relevant → relevant: the three-door order for every indication
False → non-relevant → relevant: the three-door order for every indication
Procedure → equipment → system checks → test → interpret → evaluate → report → post-clean or demag
Procedure → equipment → system checks → test → interpret → evaluate → report → post-clean or demag

Take a Look at the 8 Parts and 60 Topics

Before You Start: The Job and the Exam

pp. 5-10
  1. Where MT and PT Fit in NDT
  2. Level I, Level II, Level III: Who Does What
  3. Your Employer's Written Practice
  4. Training and Experience Hours at a Glance
  5. The Three Exams: General, Specific, Practical
  6. The Vision Test You Need Every Year

Discontinuities: What You're Hunting

pp. 11-16
  1. Discontinuity vs. Defect
  2. Inherent, Processing and Service Discontinuities
  3. Weld Discontinuities That Reach the Surface
  4. Forging and Casting Discontinuities
  5. Fatigue Cracks: The Service Crack
  6. Tight, Shallow, Subsurface: What Each Method Can See

MT: How Magnetism Finds Cracks

pp. 17-25
  1. Ferromagnetic or Not?
  2. The Leakage Field: Why Particles Gather
  3. Field Direction vs. Crack Orientation
  4. Circular Magnetization
  5. Longitudinal Magnetization
  6. AC vs. DC vs. Half-Wave
  7. Permeability, Retentivity, Coercive Force
  8. Continuous vs. Residual Method
  9. Curie Point and Temperature Limits

MT on the Job: Equipment and Technique

pp. 26-34
  1. The Yoke: Your Everyday Tool
  2. Yoke Lifting Power Check
  3. Prods: Circular Field Between Two Points
  4. Coils and Fill Factor
  5. Head Shot and Central Conductor
  6. Proving the Field: Pie Gauge, Shims, Gaussmeter
  7. Dry Particles
  8. Wet Particles and the Settling Test
  9. Demagnetization and Residual Field

PT: The Six Steps

pp. 35-43
  1. The Six PT Steps on One Page
  2. Step 1: Pre-Cleaning
  3. Step 2: Applying the Penetrant
  4. Step 3: Dwell Time
  5. Step 4: Removing Excess, Solvent-Removable
  6. Step 4: Removing Excess, Water-Washable
  7. Step 4: Post-Emulsifiable, Lipophilic and Hydrophilic
  8. Step 5: Developing
  9. Step 6: Inspect and Post-Clean

PT: Methods, Materials and Controls

pp. 44-50
  1. Type I and Type II: Fluorescent vs. Visible
  2. Methods A, B, C, D in One Table
  3. Sensitivity Levels
  4. Developer Forms
  5. UV-A and White Light Requirements
  6. Material Compatibility: Sulfur, Halogens, Oxygen
  7. System Checks: TAM Panel and Known-Defect Standards

Reading Indications

pp. 51-57
  1. Relevant, Non-Relevant, False: The Same Three Questions
  2. False Indications
  3. Non-Relevant Indications in MT
  4. Linear vs. Rounded Indications
  5. What the Shape Tells You
  6. Evaluating Against Acceptance Criteria
  7. Writing the Report

Exam Day and Review

pp. 58-64
  1. MT vs. PT Side by Side
  2. Numbers to Have at Hand
  3. The Most Frequent MT Technique Errors
  4. The Most Frequent PT Technique Errors
  5. How Questions Are Worded on General and Specific Exams
  6. Your Practical Exam: The Order to Follow
  7. Last-Night Checklist

Who This Book Is For

You're in your company's NDT training

Every topic from class gets its own page to come back to, so the course theory stays in order.

Your Level I or II exam is coming up

You review MT and PT in the same order every time, with the practice questions to find your weak spots before the real test.

You already inspect with a yoke or a PT kit

Print the pages you need and keep them at hand on the job, in front of the supervisor or the auditor.

Plus: 2 Free Books

MT & PT Practice Questions
BONUS 1

MT & PT Practice Questions

Exam-style questions on both methods with the answer explained, so you find your weak spots before the real test, not during it.

Common MT & PT Mistakes: Review Cards
BONUS 2

Common MT & PT Mistakes: Review Cards

The most frequent technique errors on one card each (over-removal, short dwell, wrong field direction, skipped demag), drawn side by side with the right way, to review the night before.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've worked around welds for years and now need my MT/PT certification?

Yes. It's built for people who already know welds and defects and need the MT and PT theory in order. It isn't a new course: it's the same theory as your manual, one topic per page, drawn, so you can review it in the same order every time. Your question books test you; this one shows you why the answer is what it is.

Where does the content come from?

From ASNT SNT-TC-1A, ASME Section V Articles 6 and 7, and ASTM E1444, E709, E1417 and E165. The MT and PT theory is the same whether your employer follows SNT-TC-1A, ANSI/ASNT CP-189 or NAS 410. What changes are the hours, the exam rules and the acceptance criteria, and those come from your written practice. Every code value is flagged to check against your written practice and the edition it cites.

Is it official material?

No. It's independent study material, not issued or endorsed by ASNT, ASME, ASTM, AWS or any certifying body. It doesn't give you a certificate either: under SNT-TC-1A, your employer certifies you through its written practice, your training hours, your experience and your exams. This book helps you study for those exams.

Does it replace my training course?

No. It doesn't replace your training hours, your experience hours or your employer's written practice. It helps you review what you learn there.

Are the practice questions the ones on the exam?

No. They're written for this book, in exam style, with the answer explained. They aren't official questions from any exam.

When and how do I get it?

The book and the 2 bonus books arrive as PDFs by email, at the address you enter at checkout.

Do I have to pay every month?

No. It's a one-time payment.

Can I have it on paper?

Yes. The PDF is ready to print: the whole book, or just the pages you want to keep at the shop.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

US$ 27US$ 63
Get the book · US$ 27

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Welding Inspector Exam Illustrated

Prepare for the AWS CWI exam with 67 illustrated pages, one topic per page: weld and NDE symbols decoded one by one…

From US$ 27 US$ 63

CNC Machining Illustrated

CNC turning and milling, one topic per illustrated page: machine zero vs. work zero, tool offsets, G90 vs. G91, the…

From US$ 27 US$ 63

Quality Inspector Illustrated

Quality inspection explained one topic per page, every concept drawn: calipers, micrometers and gages, blueprints and…

From US$ 27 US$ 63