Study in Pictures🌐 English (United States)
Quality Inspector Illustrated

Digital book in PDF · read it on your phone or print it

Quality Inspector Illustrated

Vernier calipers and micrometers, the title block, feature control frames, datums, AQL sampling, control charts, Cpk, first article inspection and MRB. Each topic gets its own page: the drawing first, then what you need to remember.

  • 71 illustrated pages
  • English
  • 30-day guarantee
US$ 27US$ 63
Get the book · US$ 27

Price shown for: United States. In other countries, the checkout shows the price that applies there.

About this book

What it is

Vernier calipers and micrometers, the title block, feature control frames, datums, AQL sampling, control charts, Cpk, first article inspection and MRB. Each topic gets its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're moving from the machine to QC
  • Your certification exam is coming up
  • You already work as an inspector
What it covers
  1. Measurement Basics
  2. Hand Tools and Gages
  3. Reading the Print
  4. GD&T and the Feature Control Frame
  5. Sampling by Attributes
  6. SPC and Capability
  7. The Quality System on the Floor
  8. Review and Exam Prep
Language
English (United States)
Pages
71
Format
Digital book in PDF · read it on your phone or print it
Price
US$ 27 (United States)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

Accuracy = close to the true value (bias). Precision = repeatable readings. Four targets show the difference.
Accuracy = close to the true value (bias). Precision = repeatable readings. Four targets show the difference.
Granite plate grades: AA lab, A inspection, B toolroom
Granite plate grades: AA lab, A inspection, B toolroom
Part number, revision, units, projection and 'Interpret per ASME Y14.5-2018', each box labeled.
Part number, revision, units, projection and 'Interpret per ASME Y14.5-2018', each box labeled.
Feature control frame: symbol | Ø + value + modifier | primary | secondary | tertiary datum
Feature control frame: symbol | Ø + value + modifier | primary | secondary | tertiary datum
ANSI/ASQ Z1.4: AQL is the worst tolerable process average, never a license to ship defects.
ANSI/ASQ Z1.4: AQL is the worst tolerable process average, never a license to ship defects.
Worn tool, new bar, shift change: special causes you find. Random spread: leave it alone.
Worn tool, new bar, shift change: special causes you find. Random spread: leave it alone.
Out-of-tolerance gage: tag it, then review everything it measured since its last good calibration.
Out-of-tolerance gage: tag it, then review everything it measured since its last good calibration.
Revision → clean → 68 °F → zero → measure → record → limits → disposition
Revision → clean → 68 °F → zero → measure → record → limits → disposition

Take a Look at the 8 Parts and 67 Topics

Measurement Basics

pp. 5-9
  1. Accuracy vs. precision
  2. Resolution and the 10:1 rule
  3. Reading decimal inches
  4. Temperature and the 68 °F reference
  5. Tolerance, limits and nominal

Hand Tools and Gages

pp. 10-22
  1. Vernier caliper: reading in 3 steps
  2. Dial and digital calipers
  3. Outside micrometer: sleeve and thimble
  4. Vernier micrometer: reading tenths
  5. Micrometer technique and zero check
  6. Dial indicator and cosine error
  7. Dial test indicator
  8. Gage blocks
  9. Pin gages and GO/NO-GO
  10. Thread gages and thread classes
  11. Surface plate and height gage
  12. Surface finish: Ra in microinches
  13. CMM basics for the inspector

Reading the Print

pp. 23-29
  1. The title block
  2. Third-angle projection
  3. Line types
  4. Section and detail views
  5. Hole callouts and symbols
  6. Rule #1: the envelope principle
  7. Revisions and notes

GD&T and the Feature Control Frame

pp. 30-40
  1. Feature control frame anatomy
  2. Datums and the 3-2-1 setup
  3. Flatness and straightness
  4. Circularity and cylindricity
  5. Perpendicularity, parallelism and angularity
  6. Position: the cylindrical tolerance zone
  7. MMC, LMC and RFS
  8. Bonus tolerance, worked out
  9. Profile of a line and a surface
  10. Circular and total runout
  11. Removed symbols: concentricity and symmetry

Sampling by Attributes

pp. 41-48
  1. Why sample and what AQL means
  2. Finding the code letter
  3. Sample size and Ac/Re numbers
  4. Normal, tightened and reduced inspection
  5. Double and multiple sampling
  6. Zero-acceptance (c = 0) plans
  7. OC curve, producer's and consumer's risk
  8. Defect classes: critical, major, minor

SPC and Capability

pp. 49-57
  1. Common cause vs. special cause
  2. Mean, range and standard deviation
  3. Normal curve: 68-95-99.7
  4. Histograms and what their shape tells you
  5. X-bar and R chart: building it
  6. Reading the chart: out-of-control rules
  7. Attribute charts: p, np, c and u
  8. Cp and Cpk with one example
  9. Gage R&R in plain terms

The Quality System on the Floor

pp. 58-65
  1. Calibration and NIST traceability
  2. Receiving inspection
  3. In-process and final inspection
  4. First article inspection (AS9102)
  5. Nonconformance and MRB dispositions
  6. Root cause: 5 Whys and fishbone
  7. Corrective action and 8D
  8. ISO 9001 and AS9100 for the inspector

Review and Exam Prep

pp. 66-71
  1. The bench order: same steps every time
  2. Formula sheet
  3. GD&T symbols at a glance
  4. Most frequent inspection errors
  5. Exam day plan
  6. Glossary

Who This Book Is For

You're moving from the machine to QC

You already know the tools. The book shows you what an inspector does with them, from the title block to the feature control frame, one page per topic.

Your certification exam is coming up

AQL, control charts and Cpk are each worked through with one example, in the same order of steps. At the end you get the formula sheet and the practice questions to find your weak spots.

You already work as an inspector

Keep it at the bench for the questions that come up on the job: what to do with an out-of-tolerance gage, how to read the frame, which MRB disposition fits.

Plus: 2 Free Books

Quality Inspector Practice Questions
BONUS 1

Quality Inspector Practice Questions

Exam-style questions on gages, GD&T, sampling and SPC, each with the answer and a short explanation, so you find your weak spots before exam day.

The 15 Most Common Inspection Mistakes
BONUS 2

The 15 Most Common Inspection Mistakes

The mistakes inspectors make most often, from reading a micrometer to closing a lot, each drawn before and after so you spot them on the bench.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've used calipers for 20 years and I'm moving into QC?

Yes. It doesn't teach you to hold a micrometer. It shows how an inspector reads the print, the frame, the sampling table and the control chart, one page per topic.

Where does the content come from?

The topics follow the areas of the ASQ Certified Quality Inspector (CQI) Body of Knowledge, with the technical content checked against US standards: ASME Y14.5-2018 for GD&T, ANSI/ASQ Z1.4 for sampling, the AIAG SPC and MSA manuals, SAE AS9102 for first article and NIST traceability for calibration. Every standard reference is marked so you can check it against the current edition. Measurements are in inches, at the 68 °F reference.

Is this official material?

No. It's an independent illustrated study book, with no affiliation to ASQ, ASME, AIAG, SAE or any certifying body. It doesn't give you a certificate or credits toward one: you still take the exam with the certifying body. The book is what you study with.

Does it replace a course or on-the-job training?

No. It's a study and review aid. It doesn't replace formal training, your company's procedures or the current standards.

Are the practice questions the ones on the exam?

No. They're written for this book, in the style of the exam, so you can find your weak spots. They aren't official exam questions.

When and how do I get it?

As a PDF by email, sent to the address you enter at checkout. The 2 bonus books come the same way.

Do I have to pay every month?

No. It's a one-time payment, with no subscription.

Can I have it on paper?

Yes. The PDF is made to print, so you can print the whole book or only the pages you want at the bench.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

US$ 27US$ 63
Get the book · US$ 27

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Welding Inspector Exam Illustrated

Prepare for the AWS CWI exam with 67 illustrated pages, one topic per page: weld and NDE symbols decoded one by one…

From US$ 27 US$ 63

CNC Machining Illustrated

CNC turning and milling, one topic per illustrated page: machine zero vs. work zero, tool offsets, G90 vs. G91, the…

From US$ 27 US$ 63

NDT Illustrated: MT & PT

Magnetic particle and liquid penetrant testing, one topic per page, each with a big clear drawing: the 6 PT steps…

From US$ 27 US$ 63