Study in Pictures🌐 English (United States)
Pressure Vessel Inspector Illustrated

Digital book in PDF · read it on your phone or print it

Pressure Vessel Inspector Illustrated

Corrosion rate, remaining life, the half-life rule, t-min and MAWP, worked in the same five steps every time. Plus damage mechanisms, NDE, relief devices and pressure tests: one topic per page, the drawing first, then the code paragraph it comes from.

  • 65 illustrated pages
  • English
  • 30-day guarantee
US$ 27US$ 63
Get the book · US$ 27

Price shown for: United States. In other countries, the checkout shows the price that applies there.

About this book

What it is

Corrosion rate, remaining life, the half-life rule, t-min and MAWP, worked in the same five steps every time. Plus damage mechanisms, NDE, relief devices and pressure tests: one topic per page, the drawing first, then the code paragraph it comes from.

Who This Book Is For
  • You're studying the body of knowledge
  • Your exam window is close
  • You already work in the plant
What it covers
  1. The Exam and the Code Map
  2. The Vessel and ASME VIII-1 Basics
  3. Calculations, Same Steps Every Time
  4. Damage Mechanisms (API 571)
  5. Inspecting the Vessel and NDE
  6. Relief Devices, Repairs and Pressure Tests
  7. Welding: API 577 and Section IX
  8. Exam Review
Language
English (United States)
Pages
65
Format
Digital book in PDF · read it on your phone or print it
Price
US$ 27 (United States)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

One topic per page: drawing, 2-4 cards and the code paragraph, tagged API 510, VIII-1, 571, 572, 576, 577, 578, V, IX or PCC-2.
One topic per page: drawing, 2-4 cards and the code paragraph, tagged API 510, VIII-1, 571, 572, 576, 577, 578, V, IX or PCC-2.
Spot RT: one spot per 50 ft per welder, at least 6 in long.
Spot RT: one spot per 50 ft per welder, at least 6 in long.
Data, formula, substitute, round, check: one routine for every API 510 problem.
Data, formula, substitute, round, check: one routine for every API 510 problem.
API RP 571: eight headings, same order for every damage mechanism
API RP 571: eight headings, same order for every damage mechanism
Internal, on-stream, external, thickness: four views of the same vessel, and deferral only before the due date.
Internal, on-stream, external, thickness: four views of the same vessel, and deferral only before the due date.
Preheat method: P-No. 1 and 3, 300°F minimum, 600°F interpass, band 4 in or 4t.
Preheat method: P-No. 1 and 3, 300°F minimum, 600°F interpass, band 4 in or 4t.
4 processes, 1 page: shielding, typical use and the defects to look for
4 processes, 1 page: shielding, typical use and the defects to look for
110 closed-book in 2.75 h, 60 open-book in 3.75 h: about 1.5 and 3.75 minutes each.
110 closed-book in 2.75 h, 60 open-book in 3.75 h: about 1.5 and 3.75 minutes each.

Take a Look at the 8 Parts and 61 Topics

The Exam and the Code Map

pp. 5-10
  1. How to use this book with your codes open
  2. The Effectivity Sheet: which editions you are tested on
  3. Which document answers which question
  4. Inside API 510: the sections you will use most
  5. Who does what: owner-user, inspector, engineer, examiner
  6. Units and rounding before you start

The Vessel and ASME VIII-1 Basics

pp. 11-18
  1. Anatomy of a pressure vessel
  2. Head types and where each formula lives
  3. The nameplate: what every stamped line means
  4. Weld joint categories A, B, C, D
  5. Joint efficiency E from Table UW-12
  6. Allowable stress S: reading Section II-D through VIII-1
  7. MDMT and brittle fracture: the UCS-66 curves
  8. Radiography extent: UW-11, UW-51 and UW-52

Calculations, Same Steps Every Time

pp. 19-28
  1. The 5-step routine for every calculation
  2. CMLs and thickness readings: where the numbers come from
  3. Long-term vs short-term corrosion rate
  4. Remaining life
  5. Shell t-min: circumferential stress (UG-27)
  6. Head t-min: 2:1 ellipsoidal, hemispherical, torispherical
  7. Shell MAWP from measured thickness
  8. Head MAWP and which component limits the vessel
  9. Static head: pressure at the bottom of the vessel
  10. Next inspection date from remaining life

Damage Mechanisms (API 571)

pp. 29-37
  1. How API 571 describes every mechanism
  2. Corrosion under insulation (CUI)
  3. Chloride stress corrosion cracking
  4. Wet H2S damage: HIC, SOHIC, SSC, blistering
  5. Caustic and amine cracking
  6. High temperature hydrogen attack (HTHA)
  7. Brittle fracture
  8. Creep, thermal fatigue and mechanical fatigue
  9. Erosion, MIC and general vs localized loss

Inspecting the Vessel and NDE

pp. 38-46
  1. Inspection types and plans (API 510 and API 572)
  2. Intervals: half-life, 10 years, 5 years external
  3. On-stream inspection in place of internal
  4. External inspection: what to look at
  5. Visual examination (Section V Article 9)
  6. PT: liquid penetrant (Article 6)
  7. MT: magnetic particle (Article 7)
  8. RT: film, IQI and unsharpness (Article 2)
  9. UT: thickness and weld examination (Articles 4 and 23)

Relief Devices, Repairs and Pressure Tests

pp. 47-54
  1. Pressure relief devices: types (API 576)
  2. Set pressure and overpressure limits
  3. PRD inspection and test intervals
  4. Repair, alteration or rerating?
  5. Repair methods: welded patches, buildup, fillet-welded patches
  6. PWHT and its alternatives
  7. Hydrostatic test (UG-99)
  8. Pneumatic test (UG-100) and when API 510 requires a test

Welding: API 577 and Section IX

pp. 55-60
  1. Welding processes at a glance
  2. Weld discontinuities and how to spot them
  3. WPS vs PQR vs WPQ
  4. Essential, supplementary essential and nonessential variables
  5. Reviewing a PQR line by line
  6. Welder qualification and continuity

Exam Review

pp. 61-65
  1. Formula sheet on one page
  2. Numbers to have at your fingertips
  3. Most common calculation mistakes
  4. Closed-book vs open-book: how to tab and pace
  5. Final checklist for exam week

Who This Book Is For

You're studying the body of knowledge

Every document gets a map and every topic gets a page, so you know which code answers which question before you open it.

Your exam window is close

Calculations in the same five steps, the numbers to know and the pacing for closed-book and open-book, ready for one last review.

You already work in the plant

Damage mechanisms, intervals and relief devices drawn on one page each, to print and keep with your inspection notes.

Plus: 2 Free Books

API 510 Exam-Style Practice Questions with Worked Answers
BONUS 1

API 510 Exam-Style Practice Questions with Worked Answers

Test yourself on calculations, intervals and code questions, and see each answer worked out with the paragraph it comes from.

The 15 Most Common Calculation Mistakes + Formula Quick Sheets
BONUS 2

The 15 Most Common Calculation Mistakes + Formula Quick Sheets

Review t-min, MAWP, corrosion rate, remaining life and test pressures on one-page sheets, and spot the errors people make most often before they cost you points.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is this for me if I already work in a plant and I'm going for API 510?

Yes. It doesn't explain what a valve is. It organizes the body of knowledge: which code answers what, the calculations in five fixed steps, and every topic drawn.

Where does the content come from?

From the API ICP Body of Knowledge and the current Effectivity Sheet, and the editions of the documents it lists: API 510, API RP 571, 572, 576 and 577, and ASME Section V, VIII-1 and IX. Every page names the document and paragraph its numbers come from, so you can check each one against the codes you'll use on exam day.

Is this official material?

No. It's independent study material, not affiliated with or endorsed by API or ASME. It doesn't give you a certificate or count toward your API eligibility: the certification only comes from passing the API exam.

Does it replace a prep course or the codes?

No. It's a study companion for the weeks before the exam. You still need the API and ASME documents, and you can't take this book into the exam: the open-book part uses only the documents API provides.

Are the practice questions the real exam questions?

No. They're written for this book, in the style of the exam, with worked answers and the paragraph each one comes from.

When and how do I get it?

As a PDF by email, at the address you enter at checkout, together with the 2 bonus books.

Do I have to pay every month?

No. It's a one-time payment.

Can I have it on paper?

It's a PDF, so you can print it at home or at a print shop and take it to work.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

US$ 27US$ 63
Get the book · US$ 27

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Welding Inspector Exam Illustrated

Prepare for the AWS CWI exam with 67 illustrated pages, one topic per page: weld and NDE symbols decoded one by one…

From US$ 27 US$ 63

CNC Machining Illustrated

CNC turning and milling, one topic per illustrated page: machine zero vs. work zero, tool offsets, G90 vs. G91, the…

From US$ 27 US$ 63

NDT Illustrated: MT & PT

Magnetic particle and liquid penetrant testing, one topic per page, each with a big clear drawing: the 6 PT steps…

From US$ 27 US$ 63

Quality Inspector Illustrated

Quality inspection explained one topic per page, every concept drawn: calipers, micrometers and gages, blueprints and…

From US$ 27 US$ 63