Study in Pictures🌐 English (Canada)
Chimney & Wood Heat Illustrated

Digital book in PDF · read it on your phone or print it

Chimney & Wood Heat Illustrated

Written for Canada: metric distances based on CSA B365 and the National Building Code of Canada, not NFPA 211. Clearances, floor protection, shields, flue pipe, chimney height, sweeping and Level 1, 2 and 3 inspections. Each topic gets its own page: the drawing first, then what you need to remember.

  • 66 illustrated pages
  • English
  • 30-day guarantee
CA$ 34.99CA$ 79.99
Get the book · CA$ 34.99

Price shown for: Canada. In other countries, the checkout shows the price that applies there.

About this book

What it is

Written for Canada: metric distances based on CSA B365 and the National Building Code of Canada, not NFPA 211. Clearances, floor protection, shields, flue pipe, chimney height, sweeping and Level 1, 2 and 3 inspections. Each topic gets its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're taking the wood heat courses
  • Your exam is coming up
  • You already install, sweep or inspect
What it covers
  1. How Wood Heat Works
  2. The Appliances
  3. Clearances and Floor Protection
  4. Flue Pipe (Connectors)
  5. Chimneys
  6. Sweeping
  7. Level 1, 2 and 3 Inspections
  8. Review and Checklists
Language
English (Canada)
Pages
66
Format
Digital book in PDF · read it on your phone or print it
Price
CA$ 34.99 (Canada)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

Single-wall: 450 mm to combustibles (B365-17; check B365:25 adoption) · listed double-wall: the clearance on its label
Single-wall: 450 mm to combustibles (B365-17; check B365:25 adoption) · listed double-wall: the clearance on its label
Masonry chimney walls: at least 75 mm of solid units around the flue.
Masonry chimney walls: at least 75 mm of solid units around the flue.
Flue area: never less than the flue pipe; fireplace flues from NBC Tables 9.21.2.5.A and B.
Flue area: never less than the flue pipe; fireplace flues from NBC Tables 9.21.2.5.A and B.
Level 1 Visual · Level 2 Technical with camera · Level 3 Invasive with owner's consent
Level 1 Visual · Level 2 Technical with camera · Level 3 Invasive with owner's consent
Camera up the flue, inspector in the attic: liner joints, firestops, 50 mm to framing
Camera up the flue, inspector in the attic: liner joints, firestops, 50 mm to framing
Three clearance mix-ups side by side: label vs table, shield vs tile, alcove vs open room
Three clearance mix-ups side by side: label vs table, shield vs tile, alcove vs open room
Pipe through drywall, crimp up, no screws: eight common defects on one installation
Pipe through drywall, crimp up, no screws: eight common defects on one installation

Take a Look at the 8 Parts and 62 Topics

How Wood Heat Works

pp. 5-10
  1. The Three Stages of a Wood Fire
  2. Creosote: Stage 1, 2 and 3
  3. Draft: Why Smoke Goes Up
  4. Wood Moisture: Under 20%
  5. Listed or Unlisted: The Label Decides
  6. The Map of Codes and Standards

The Appliances

pp. 11-17
  1. Radiant vs Circulating Stoves
  2. Fireplace Inserts
  3. Factory-Built Fireplaces
  4. The Masonry Fireplace
  5. Wood Furnaces and Add-On Units
  6. Reading the Certification Label
  7. Cleaner-Burning Appliances

Clearances and Floor Protection

pp. 18-27
  1. What Counts as Combustible
  2. How Clearance Is Measured
  3. Listed Clearances: Read the Diagram
  4. Unlisted Appliances: The B365 Table
  5. Floor Protection: 450 mm in Front, 200 mm Around
  6. The Hearth Extension of a Masonry Fireplace
  7. How a Wall Shield Works
  8. Shield Reductions: Doing the Math
  9. What Is Not a Shield
  10. Mantels, Trim and Furniture

Flue Pipe (Connectors)

pp. 28-35
  1. Single-Wall vs Double-Wall Pipe
  2. Crimp Down, Three Screws
  3. Slope: 20 mm per Metre
  4. Length and Elbows
  5. Pipe Thickness and Condition
  6. Flue Pipe Never Goes Through a Ceiling
  7. Through a Combustible Wall
  8. Dampers and Barometric Controls

Chimneys

pp. 36-45
  1. Anatomy of a Masonry Chimney
  2. Clay Liners and Their Joints
  3. Chimney Clearance to Framing: 50 mm and 12 mm
  4. Factory-Built Chimneys: ULC-S629
  5. Chimney Height: The 3-2-10 Rule
  6. Sizing the Flue to the Appliance
  7. Relining: ULC-S635 and ULC-S640
  8. One Solid-Fuel Appliance per Flue
  9. Crown, Cap and Spark Arrestor
  10. Exterior Chimneys and Cold Flues

Sweeping

pp. 46-52
  1. Setting Up the Job
  2. Brushes and Rods: Size and Shape
  3. Top-Down or Bottom-Up
  4. The 3 mm Guideline
  5. Removing Stage 3 Glaze
  6. After a Chimney Fire
  7. Handing Back to the Customer

Level 1, 2 and 3 Inspections

pp. 53-60
  1. Three Levels at a Glance
  2. Level 1: The Route in Order
  3. When Level 2 Is Needed
  4. Level 2: Camera and Attic
  5. Level 3: Opening What's Hidden
  6. The Insurance Inspection Form
  7. Smoke and CO Alarms
  8. Wording a Finding

Review and Checklists

pp. 61-66
  1. The Numbers on One Page
  2. Shielded or Not: The Mix-Ups
  3. Common Installation Mistakes
  4. A Full Inspection, Start to Finish
  5. Checklist Before You Sign
  6. Glossary of the Trade

Who This Book Is For

You're taking the wood heat courses

Each clearance, pipe rule and chimney rule is a drawing with its number in millimetres, so what you study at night is still there in the morning.

Your exam is coming up

The review part puts every number on one page and the shielded/unshielded mix-ups side by side, so you can go over it all in one sitting.

You already install, sweep or inspect

Print the pages you use most and keep them in the truck: the Level 1 route in order, the clearances and the defects to flag in a report.

Plus: 2 Free Books

Wood Heat Exam-Style Questions
BONUS 1

Wood Heat Exam-Style Questions

Practise with exam-style questions on clearances, flue pipe, chimneys and inspections, each answer explained with the page where it's drawn.

The 15 Most Common Wood Stove Installation Mistakes
BONUS 2

The 15 Most Common Wood Stove Installation Mistakes

Spot the defects at a glance: 15 frequent installation mistakes drawn before and after, so you know what to flag in a report.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've been sweeping or installing for years?

Yes. It isn't a beginner's book: it puts the rules you already apply in order, one topic per page, so you can review them before the course or check one on the job.

Where does the content come from?

From CSA B365 and the National Building Code of Canada (Sections 9.21 and 9.22), plus the ULC standards for listed equipment, all in metric. It's written for Canada and isn't based on NFPA 211, the US standard. Codes are adopted province by province (Ontario, for example, has its own Building Code), so always check the code in force where you work and the appliance manufacturer's instructions.

Is it official material?

No. It's independent study material, not affiliated with or endorsed by WETT Inc., CSA Group, NRC, any provincial authority or any school.

Does it replace the course?

No. It's a book to study and review alongside your course and field training. It doesn't give you a certificate and doesn't count toward one: certification comes only from the accredited course and its exam.

Are the practice questions the ones on the exam?

No. The exam-style questions are written for this book. They aren't official questions from any exam.

When and how do I get it?

The book and the 2 bonus books come as a PDF by email, to the address you enter at checkout.

Do I have to pay every month?

No. It's a one-time payment.

Can I have it on paper?

Yes. The PDF is printable: print the whole book or just the pages you want in the truck.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

CA$ 34.99CA$ 79.99
Get the book · CA$ 34.99

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Gas Technician 2 Illustrated

Prepare for the Ontario Gas Technician 2 exam one illustrated page at a time: pipe sizing in kPa, m³/h and kW, venting…

From CA$ 34.99 CA$ 79.99

2nd Class Power Engineer Illustrated

The 2nd Class Power Engineer syllabus explained one topic per page: boilers, fittings and safety valves, steam tables…

From CA$ 34.99 CA$ 79.99