Study in Pictures🌐 English (Canada)
3rd Class Power Engineer Illustrated

Digital book in PDF · read it on your phone or print it

3rd Class Power Engineer Illustrated

Boilers in cross-section, steam tables, combustion, the deaerator, blowdown, three-element control, safety valves, turbines and plant math. Every topic has its own page: the drawing first, then what you need to remember.

  • 64 illustrated pages
  • English
  • 30-day guarantee
CA$ 34.99CA$ 79.99
Get the book · CA$ 34.99

Price shown for: Canada. In other countries, the checkout shows the price that applies there.

About this book

What it is

Boilers in cross-section, steam tables, combustion, the deaerator, blowdown, three-element control, safety valves, turbines and plant math. Every topic has its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're studying for your 3rd class
  • Your paper is coming up
  • You already run shifts in the plant
What it covers
  1. Plant Math Foundations
  2. Applied Mechanics
  3. Thermodynamics and Steam
  4. Boilers: Design and Calculations
  5. Combustion
  6. Feedwater and Water Treatment
  7. Controls, Safety and Codes
  8. Turbines, Pumps, Refrigeration and Electrical
  9. Review Before the Papers
Language
English (Canada)
Pages
64
Format
Digital book in PDF · read it on your phone or print it
Price
CA$ 34.99 (Canada)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

At 1000 kPa(abs) with x = 0.95: h = 762.52 + 0.95 × 2014.6 ≈ 2676.4 kJ/kg
At 1000 kPa(abs) with x = 0.95: h = 762.52 + 0.95 × 2014.6 ≈ 2676.4 kJ/kg
D-type watertube boiler: steam drum, mud drum, downcomers and risers in one natural circulation loop
D-type watertube boiler: steam drum, mud drum, downcomers and risers in one natural circulation loop
Gas path drawn left to right: superheater heats steam, economizer feedwater, air heater combustion air
Gas path drawn left to right: superheater heats steam, economizer feedwater, air heater combustion air
Pre-purge → pilot trial → flame proven → main flame → run; flame loss means shutdown and post-purge.
Pre-purge → pilot trial → flame proven → main flame → run; flame loss means shutdown and post-purge.
Swell: demand up, pressure down, level up for a moment. Shrink: the opposite.
Swell: demand up, pressure down, level up for a moment. Shrink: the opposite.
Under ASME Section I as adopted in your province: set ≤ MAWP, accumulation ≤ 6%, blowdown 2–4%.
Under ASME Section I as adopted in your province: set ≤ MAWP, accumulation ≤ 6%, blowdown 2–4%.
All formulas grouped by 3A1, 3A2, 3B1 and 3B2, with units beside each
All formulas grouped by 3A1, 3A2, 3B1 and 3B2, with units beside each
Gauge vs absolute, °C vs K, kJ/h vs kW and seven more, side by side
Gauge vs absolute, °C vs K, kJ/h vs kW and seven more, side by side

Take a Look at the 9 Parts and 60 Topics

Plant Math Foundations

pp. 5-10
  1. SI Units on Every Problem
  2. Gauge vs Absolute Pressure
  3. Celsius vs Kelvin
  4. The Same 5 Steps for Every Calculation
  5. Rearranging Formulas Without Guessing
  6. Trigonometry for Forces and Piping

Applied Mechanics

pp. 11-17
  1. Forces, Vectors and Resultants
  2. Moments and Levers
  3. Friction on a Plane
  4. Work, Power and Efficiency
  5. Stress and Strain
  6. Hoop and Longitudinal Stress in a Drum
  7. Thermal Expansion of Pipe

Thermodynamics and Steam

pp. 18-25
  1. Sensible Heat and Latent Heat
  2. Saturated, Wet and Superheated Steam
  3. Reading the Steam Tables: Which Column
  4. Dryness Fraction
  5. Interpolating Between Two Lines
  6. Gas Laws
  7. Rankine Cycle on One Drawing
  8. Heat Transfer: Conduction, Convection, Radiation

Boilers: Design and Calculations

pp. 26-33
  1. Firetube Boiler in Cross-Section
  2. Watertube Boiler in Cross-Section
  3. Steam Drum Internals
  4. Superheater, Economizer and Air Heater
  5. Boiler Horsepower and Capacity
  6. Factor of Evaporation
  7. Boiler Efficiency
  8. Heat Balance: Where the Heat Goes

Combustion

pp. 34-39
  1. The 3 Ts and the Fire Triangle
  2. Combustion Equations for Carbon, Hydrogen and Sulphur
  3. Theoretical Air for Natural Gas
  4. Excess Air and Flue Gas O2
  5. Burners and Firing Rate
  6. Purge, Ignition and Flame Safeguard

Feedwater and Water Treatment

pp. 40-45
  1. Impurities in Water and What They Do
  2. External Treatment: Softener and Demineralizer
  3. The Deaerator
  4. Internal Treatment and Oxygen Scavengers
  5. Blowdown Calculation
  6. Continuous vs Bottom Blowdown

Controls, Safety and Codes

pp. 46-52
  1. Drum Level: Shrink and Swell
  2. Three-Element Feedwater Control
  3. Control Loops: P, PI, PID
  4. Safety Valves
  5. Gauge Glass and Low-Water Cutoff
  6. Codes and Who Enforces Them
  7. Lockout and Confined Space

Turbines, Pumps, Refrigeration and Electrical

pp. 53-60
  1. Impulse vs Reaction Turbine
  2. Turbine Trips and Protection
  3. Surface Condenser and Vacuum
  4. Gas Turbine on One Page
  5. Centrifugal Pumps and NPSH
  6. Pump Affinity Laws
  7. Refrigeration Cycle
  8. Electrical Basics for the Plant

Review Before the Papers

pp. 61-64
  1. Every Formula on One Page
  2. 10 Frequent Calculation Mistakes
  3. The Same Order for Plant Procedures
  4. Exam Day Checklist

Who This Book Is For

You're studying for your 3rd class

Each topic of the theory is one drawing you can read between shifts, so the boiler, the steam and the controls finally connect.

Your paper is coming up

Every formula on one page, the 10 frequent calculation mistakes and the exam-style questions to check where your reasoning goes wrong.

You already run shifts in the plant

The why behind what you see on rounds: shrink and swell, the burner sequence, the safety valve numbers, printed and kept at hand.

Plus: 2 Free Books

3rd Class Exam-Style Questions with Worked Answers
BONUS 1

3rd Class Exam-Style Questions with Worked Answers

Practise with multiple-choice questions in the style of the 3rd class papers, each answer explained step by step so you see where the reasoning goes wrong.

15 Frequent Plant Mistakes: Before and After
BONUS 2

15 Frequent Plant Mistakes: Before and After

Review the mistakes that come up most often in theory and on shift, from misreading a gauge glass to mixing up gauge and absolute pressure, each one drawn wrong and then right.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I already hold my 4th class and have years in the plant?

Yes. It isn't a beginner's book: it covers the 3rd class theory, from steam tables to three-element control. The plant math pages at the start are there for a quick refresh if it's been years since your last written exam.

Where does the content come from?

It's organized around the published standardized 3rd class syllabus used by the participating provinces and territories, including Alberta, BC, Saskatchewan, Manitoba and Ontario, and covers the key topics of its four papers: 3A1, 3A2, 3B1 and 3B2. The content is checked against provincial boiler and pressure vessel regulations, CSA B51 and ASME Section I, all cited descriptively. For code editions and local requirements, always check with your provincial regulator.

Is it official material?

No. It's an independent illustrated study book. It isn't published, approved or endorsed by any examination committee, regulator or code body. It doesn't give you a certificate, course credit or steam time: your 3rd class certificate comes only from passing the papers with your provincial regulator.

Does it replace my course or textbook?

No. It works alongside them: it draws each topic so the textbook makes sense, and it gives you one place to revise. Keep your course, your textbooks and your plant's procedures.

Are the practice questions the ones on the exam?

No. They're written for this book, in the style of the 3rd class papers, each with a worked answer. They aren't official exam questions.

When and how do I get it?

The book and the 2 bonus books arrive as PDFs by email, at the address you enter at checkout.

Do I have to pay every month?

No. It's a one-time payment. No subscription.

Can I have it on paper?

Yes. It's a printable PDF: print the whole book or just the pages you want to keep at the plant.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

CA$ 34.99CA$ 79.99
Get the book · CA$ 34.99

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Chimney & Wood Heat Illustrated

Wood stoves, inserts, clearances to combustibles, flue pipe, chimney height, draft, sweeping and Level 1, 2 and 3…

From CA$ 34.99 CA$ 79.99

Gas Technician 2 Illustrated

Prepare for the Ontario Gas Technician 2 exam one illustrated page at a time: pipe sizing in kPa, m³/h and kW, venting…

From CA$ 34.99 CA$ 79.99

2nd Class Power Engineer Illustrated

The 2nd Class Power Engineer syllabus explained one topic per page: boilers, fittings and safety valves, steam tables…

From CA$ 34.99 CA$ 79.99