Study in Pictures🌐 English (Canada)
2nd Class Power Engineer Illustrated

Digital book in PDF · read it on your phone or print it

2nd Class Power Engineer Illustrated

Boilers and fittings, safety valves, steam tables, combustion, turbines, the Rankine cycle, boiler water treatment and plant safety. Every topic has its own page: the drawing first, then what you need to remember.

  • 66 illustrated pages
  • English
  • 30-day guarantee
CA$ 34.99CA$ 79.99
Get the book · CA$ 34.99

Price shown for: Canada. In other countries, the checkout shows the price that applies there.

About this book

What it is

Boilers and fittings, safety valves, steam tables, combustion, turbines, the Rankine cycle, boiler water treatment and plant safety. Every topic has its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're starting the 2nd Class syllabus
  • Your exam date is coming up
  • You already run a plant on shift
What it covers
  1. The exam and the method
  2. Applied mechanics and heat basics
  3. Steam tables, step by step
  4. Fuels and combustion
  5. Boilers and fittings
  6. Turbines and the Rankine cycle
  7. Plant auxiliaries and systems
  8. Codes, safety and operation
  9. Review and exam day
Language
English (Canada)
Pages
66
Format
Digital book in PDF · read it on your phone or print it
Price
CA$ 34.99 (Canada)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

6 papers · Part B: 100 multiple-choice questions · 3.5 h each · 65% on each
6 papers · Part B: 100 multiple-choice questions · 3.5 h each · 65% on each
ΔL = α × L × ΔT: 30 m of steel from 20 °C to 250 °C grows about 83 mm.
ΔL = α × L × ΔT: 30 m of steel from 20 °C to 250 °C grows about 83 mm.
At 1 MPa(abs): Tsat ≈ 179.9 °C, hf ≈ 763, hfg ≈ 2015, hg ≈ 2778 kJ/kg
At 1 MPa(abs): Tsat ≈ 179.9 °C, hf ≈ 763, hfg ≈ 2015, hg ≈ 2778 kJ/kg
12 kg C + 32 kg O₂ → 44 kg CO₂: the three reactions on a balance
12 kg C + 32 kg O₂ → 44 kg CO₂: the three reactions on a balance
Firetube: gas in the tubes. Watertube: water in the tubes, built for higher pressure.
Firetube: gas in the tubes. Watertube: water in the tubes, built for higher pressure.
Pump, boiler, turbine, condenser: points 1-4 and efficiency = (turbine work − pump work) ÷ heat added
Pump, boiler, turbine, condenser: points 1-4 and efficiency = (turbine work − pump work) ÷ heat added
Softener, demineralizer, RO, phosphate, scavenger and amines on one water path
Softener, demineralizer, RO, phosphate, scavenger and amines on one water path
Province → CSA B51 → ASME Code: who regulates your boiler plant, drawn as one chain
Province → CSA B51 → ASME Code: who regulates your boiler plant, drawn as one chain

Take a Look at the 9 Parts and 62 Topics

The exam and the method

pp. 5-8
  1. What the 2nd Class covers
  2. The 4-step method: data, sketch, calculate, conclude
  3. SI units you can't afford to mix up
  4. Gauge vs absolute pressure

Applied mechanics and heat basics

pp. 9-16
  1. Stress in a boiler drum: hoop vs longitudinal
  2. Thermal expansion of pipes and tubes
  3. Work, power and efficiency
  4. Sensible heat vs latent heat
  5. Gas laws in one page
  6. Heat transfer: conduction, convection, radiation
  7. Heat exchangers and LMTD
  8. Materials and tube failure

Steam tables, step by step

pp. 17-24
  1. How a steam table is built
  2. Wet steam and dryness fraction
  3. Superheated steam tables
  4. Linear interpolation without mistakes
  5. Heat added in a boiler
  6. Throttling and separating calorimeters
  7. Entropy and the T-s diagram
  8. The Mollier (h-s) chart

Fuels and combustion

pp. 25-30
  1. The combustion equations
  2. Theoretical air for a fuel
  3. Excess air and flue gas analysis
  4. Higher vs lower heating value
  5. Natural gas, oil and solid fuel firing
  6. Stack losses and draft

Boilers and fittings

pp. 31-40
  1. Firetube vs watertube
  2. Natural circulation and the drum
  3. Superheaters, reheaters and economizers
  4. Attemperators and steam temperature control
  5. Safety valves: how they pop and reseat
  6. Safety valve capacity and testing
  7. Water column, gauge glass and low-water cutoff
  8. Blowdown: continuous vs bottom
  9. Feedwater control: single, two and three element
  10. Boiler start-up and shutdown sequence

Turbines and the Rankine cycle

pp. 41-48
  1. The Rankine cycle as a map
  2. Worked Rankine efficiency
  3. Reheat and regenerative cycles
  4. Impulse vs reaction turbines
  5. Velocity diagrams
  6. Steam rate and turbine output
  7. Condensers and vacuum
  8. Turbine protection and trips

Plant auxiliaries and systems

pp. 49-56
  1. Boiler water treatment
  2. Deaerators
  3. Centrifugal pumps and NPSH
  4. Air compressors
  5. Refrigeration cycle
  6. Generators and three-phase power
  7. Instrumentation and control loops
  8. Lubrication and bearings

Codes, safety and operation

pp. 57-62
  1. The pressure equipment legal framework in Canada
  2. Boiler inspection and repairs
  3. Lockout and confined space entry
  4. Furnace explosions and purge
  5. Low water: what to do and what never to do
  6. Water hammer and steam line warm-up

Review and exam day

pp. 63-66
  1. The formula sheet on one page
  2. The most common calculation slip-ups
  3. How to plan a long-answer question
  4. Your last-week review checklist

Who This Book Is For

You're starting the 2nd Class syllabus

See the whole syllabus drawn and in order, and know where each topic fits before you open the course texts.

Your exam date is coming up

Review one topic per page between rounds and run every calculation the same way: data, sketch, calculate, conclude.

You already run a plant on shift

Keep the drawings at hand to check why the plant does what it does, from the safety valve to the condenser vacuum.

Plus: 2 Free Books

2nd Class Practice Questions: Multiple Choice and Long-Answer, with Worked Answers
BONUS 1

2nd Class Practice Questions: Multiple Choice and Long-Answer, with Worked Answers

Test yourself in exam style on every big topic and check each answer step by step, so you know exactly where you still go blank.

The 15 Most Common Mistakes + Formula Cards
BONUS 2

The 15 Most Common Mistakes + Formula Cards

See the slip-ups operators make most often, drawn before/after, plus the key formulas and units on cards you can print and keep at hand.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I already have my 3rd Class and work rotating shifts?

Yes. It's made for operators who know the plant and want the 2nd Class syllabus drawn and in order, one topic per page. It goes past 3rd Class basics: steam tables, combustion, Rankine efficiency and velocity diagrams.

Where does the content come from?

From the standardized 2nd Class Power Engineer syllabus, cross-checked with the CSA B51 code and the requirements of ABSA, TSSA, TSASK and Technical Safety BC. Steam table values are rounded from standard published steam tables; on exam day, use the tables your exam provides.

Is this official material?

No. It's an independent study book, not affiliated with or endorsed by SOPEEC, CSA Group, ABSA, TSSA, TSASK or Technical Safety BC. Check the current exam format with your provincial authority.

Does it replace my course or the course texts?

No. It's the drawn map for reviewing and understanding what the course texts say. It doesn't give a certificate or count toward your qualifying time: those still come from your course, your plant and your provincial authority.

Are the practice questions the ones on the exam?

No. They're written for this book, in exam style, with worked answers. They aren't official questions from any exam.

When and how does it arrive?

As a PDF by email, at the address you enter at checkout, together with the 2 bonus books. It's a one-time payment, not a subscription.

Does it work for my province, or only for Ontario?

It follows the standardized 2nd Class syllabus used across the provinces, in SI units, and names the regulators for Alberta, Ontario, Saskatchewan and BC. The exam format (multiple choice or long-answer), pass mark and qualifying time are set by your provincial authority: check them there before you book your exam.

Can I have it on paper?

Yes. The PDF prints at home or at a print shop, so you can keep it in your locker at the plant.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

CA$ 34.99CA$ 79.99
Get the book · CA$ 34.99

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Chimney & Wood Heat Illustrated

Wood stoves, inserts, clearances to combustibles, flue pipe, chimney height, draft, sweeping and Level 1, 2 and 3…

From CA$ 34.99 CA$ 79.99

Gas Technician 2 Illustrated

Prepare for the Ontario Gas Technician 2 exam one illustrated page at a time: pipe sizing in kPa, m³/h and kW, venting…

From CA$ 34.99 CA$ 79.99