Study in Pictures🌐 English (Canada)
4th Class Power Engineer Illustrated

Digital book in PDF · read it on your phone or print it

4th Class Power Engineer Illustrated

The steam plant as a map, firetube and watertube boilers, the safety valve, the gauge glass, burner management, the centrifugal pump and the refrigeration cycle. Every topic gets its own page: the drawing first, then what you need to remember.

  • 64 illustrated pages
  • English
  • 30-day guarantee
CA$ 34.99CA$ 79.99
Get the book · CA$ 34.99

Price shown for: Canada. In other countries, the checkout shows the price that applies there.

About this book

What it is

The steam plant as a map, firetube and watertube boilers, the safety valve, the gauge glass, burner management, the centrifugal pump and the refrigeration cycle. Every topic gets its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're working through the course
  • Paper A or Paper B is coming up
  • You already run the plant
What it covers
  1. The Plant at a Glance
  2. Calculations for Paper A
  3. Codes, Materials, Piping and Drawings
  4. Boilers
  5. Boiler Fittings and Water
  6. Combustion and Controls
  7. Pumps, Prime Movers and Electricity
  8. Refrigeration and HVAC
  9. Exam Review
Language
English (Canada)
Pages
64
Format
Digital book in PDF · read it on your phone or print it
Price
CA$ 34.99 (Canada)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

Sensible: 419 kJ/kg (0 → 100 °C) · Latent: about 2257 kJ/kg at 100 °C.
Sensible: 419 kJ/kg (0 → 100 °C) · Latent: about 2257 kJ/kg at 100 °C.
500 kPa on a 300 × 400 mm manhole cover = 47.1 kN, area in m² first
500 kPa on a 300 × 400 mm manhole cover = 47.1 kN, area in m² first
Province enforces, CSA B51:24 covers boilers, CSA B52:23 covers refrigeration, ASME covers design.
Province enforces, CSA B51:24 covers boilers, CSA B52:23 covers refrigeration, ASME covers design.
Firetube: hot gas inside the tubes. Watertube: water inside, fire outside.
Firetube: hot gas inside the tubes. Watertube: water inside, fire outside.
Bourdon tube drawn open and the pigtail siphon's water seal
Bourdon tube drawn open and the pigtail siphon's water seal
Fuel, oxygen, heat · time, temperature, turbulence, and the smoky stack when one is missing
Fuel, oxygen, heat · time, temperature, turbulence, and the smoky stack when one is missing
Cavitation: low suction pressure flashes water to vapour; height on the suction prevents it.
Cavitation: low suction pressure flashes water to vapour; height on the suction prevents it.
Compressor → condenser → receiver → expansion valve → evaporator, high side red, low side blue
Compressor → condenser → receiver → expansion valve → evaporator, high side red, low side blue

Take a Look at the 9 Parts and 60 Topics

The Plant at a Glance

pp. 5-10
  1. The Steam Plant as a Map
  2. Gauge vs Absolute Pressure
  3. Temperature, Heat and the Boiling Point
  4. Sensible Heat vs Latent Heat
  5. Plant Safety: Lockout and Isolation
  6. Confined Space, Ammonia and Hot Work

Calculations for Paper A

pp. 11-18
  1. Pressure = Force ÷ Area
  2. Head of Water in kPa
  3. Q = m × c × ΔT
  4. Reading the Steam Tables
  5. Dryness Fraction and Wet Steam
  6. Work, Power and Efficiency
  7. Levers, Pulleys and Mechanical Advantage
  8. Boiler Efficiency and Evaporation

Codes, Materials, Piping and Drawings

pp. 19-24
  1. Who Regulates Your Boiler
  2. Boiler Plant Classes and Supervision
  3. Boiler Materials and Stresses
  4. Welding and Joints in Pressure Parts
  5. Valves: Gate, Globe, Check, Ball
  6. Piping Symbols and Reading a Drawing

Boilers

pp. 25-31
  1. Firetube vs Watertube
  2. The Scotch Marine Boiler in Cutaway
  3. The Watertube Boiler: Drums and Circulation
  4. Cast Iron Sectional and Electric Boilers
  5. Heating Surface and Boiler Rating
  6. Superheaters, Economizers and Air Heaters
  7. Boiler Inspections and the Hydrostatic Test

Boiler Fittings and Water

pp. 32-39
  1. The Safety Valve
  2. Pressure Gauge and Siphon
  3. Gauge Glass and Try Cocks
  4. Low-Water Cutoff: Float and Probe
  5. Feedwater Line: Stop Valve and Check Valve
  6. Bottom Blowdown vs Continuous Blowdown
  7. Scale, Corrosion and Carryover
  8. Water Treatment: Softener, Deaerator, Chemicals

Combustion and Controls

pp. 40-46
  1. The Combustion Triangle and the 3 Ts
  2. Excess Air and Flue Gas Reading
  3. Natural Gas Train
  4. Burner Management as a Chain
  5. Purge and Trial for Ignition
  6. Flame Scanners and Flame Failure
  7. Operating Control vs High Limit

Pumps, Prime Movers and Electricity

pp. 47-52
  1. Centrifugal Pump in Cutaway
  2. Cavitation and NPSH
  3. Steam Traps
  4. Steam Turbines: Impulse and Reaction
  5. Air Compressors and Lubrication
  6. Electricity for the Power Engineer

Refrigeration and HVAC

pp. 53-59
  1. The Vapour-Compression Cycle
  2. Pressure-Temperature: Why Gauges Tell Temperature
  3. Superheat and Subcooling
  4. Ammonia in the Arena
  5. Refrigerants and Safety Groups
  6. Absorption vs Compression
  7. HVAC Basics for Buildings

Exam Review

pp. 60-64
  1. Units That Cost Marks
  2. Fittings Checklist from Memory
  3. Start-Up, Operation and Shutdown
  4. Emergency: Low Water and Flame Failure
  5. How Multiple-Choice Questions Are Written

Who This Book Is For

You're working through the course

Each textbook chapter becomes one drawing you can come back to, so the forty fittings finally have a place on the boiler.

Paper A or Paper B is coming up

You review the whole plant in the same order, from the steam loop to the refrigeration cycle, with worked examples in kPa and °C.

You already run the plant

You see why the gauge glass, the low-water cutoff and the safety valve work the way they do, and you have the answer when the chief engineer asks.

Plus: 2 Free Books

Paper A & Paper B Practice Questions
BONUS 1

Paper A & Paper B Practice Questions

Practise with exam-style multiple-choice questions for each paper and check every answer against the page that explains it.

15 Common Mistakes Cards
BONUS 2

15 Common Mistakes Cards

Review the mistakes operators make most often (gauge glass, blowdown, safety valves, units), each one drawn before and after, ready to print and keep on hand.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I already work near a boiler or an ice plant and haven't written an exam in years?

Yes. It's built for people who already see the plant every day. It doesn't replace your course textbooks: it turns each chapter into one drawn page, puts the forty fittings in their place on the boiler and shows the Paper A calculations as worked examples in kPa, so you review in the same order instead of rereading hundreds of pages.

Where does the content come from?

From the national 4th Class Power Engineer syllabus used by the provincial regulators for Papers A and B (4A and 4B), with CSA B51 and CSA B52 cited for reference. It's written for Alberta, Ontario, BC, Saskatchewan and the other provinces and territories, and every code limit is marked to verify with your province: ABSA, TSSA, Technical Safety BC, TSASK or your local authority.

Is this official material?

No. It's an independent illustrated study book, not affiliated with or endorsed by any regulator, exam body or standards organization.

Does it replace my course or training?

No. It helps you study and review alongside your course, your supervised plant time and your plant's procedures. It doesn't give you a certificate or count toward your qualifying time: those come only from your course and your provincial authority.

Are the practice questions the ones on the exam?

No. They're exam-style questions written for this book, each one linked to the page that explains it.

When and how do I get it?

The book and the 2 bonus books arrive as PDFs by email, at the address you enter at checkout.

Do I have to pay every month?

No. It's a one-time payment. If your employer is covering it, write to us and we'll send you the receipt by email.

Can I have it on paper?

Yes. The PDFs are ready to print, so you can keep the pages you need in the boiler room.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

CA$ 34.99CA$ 79.99
Get the book · CA$ 34.99

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Chimney & Wood Heat Illustrated

Wood stoves, inserts, clearances to combustibles, flue pipe, chimney height, draft, sweeping and Level 1, 2 and 3…

From CA$ 34.99 CA$ 79.99

Gas Technician 2 Illustrated

Prepare for the Ontario Gas Technician 2 exam one illustrated page at a time: pipe sizing in kPa, m³/h and kW, venting…

From CA$ 34.99 CA$ 79.99

2nd Class Power Engineer Illustrated

The 2nd Class Power Engineer syllabus explained one topic per page: boilers, fittings and safety valves, steam tables…

From CA$ 34.99 CA$ 79.99