Study in Pictures🌐 English (Canada)
Gas Technician 2 Illustrated

Digital book in PDF · read it on your phone or print it

Gas Technician 2 Illustrated

Clocking a meter, pipe sizing, the combination gas valve, vent categories, vent termination clearances, pressure testing, purging and two-stage propane regulation. Every topic gets its own page: the drawing first, then what you need to remember.

  • 68 illustrated pages
  • English
  • 30-day guarantee
CA$ 34.99CA$ 79.99
Get the book · CA$ 34.99

Price shown for: Canada. In other countries, the checkout shows the price that applies there.

About this book

What it is

Clocking a meter, pipe sizing, the combination gas valve, vent categories, vent termination clearances, pressure testing, purging and two-stage propane regulation. Every topic gets its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're studying for your G2
  • Your exam date is booked
  • You already work with gas
What it covers
  1. The G2 Job and the Gas System
  2. Pressure, Units and Conversions
  3. Piping and Pipe Sizing
  4. Regulators, Valves and Controls
  5. Combustion and Air Supply
  6. Venting
  7. Testing, Purging and Start-up
  8. Propane
  9. Review and Exam Day
Language
English (Canada)
Pages
68
Format
Digital book in PDF · read it on your phone or print it
Price
CA$ 34.99 (Canada)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

m³/h = MJ/h ÷ MJ/m³ · 108 ÷ 38.9 ≈ 2.8 m³/h natural gas
m³/h = MJ/h ÷ MJ/m³ · 108 ÷ 38.9 ≈ 2.8 m³/h natural gas
Reading a sizing table in three moves, with a practice table that isn't the code's.
Reading a sizing table in three moves, with a practice table that isn't the code's.
Combination gas valve: manual valve, redundant valves, regulator, inlet and outlet taps.
Combination gas valve: manual valve, redundant valves, regulator, inlet and outlet taps.
Smaller connector enters higher; an orphaned water heater means rechecking the vent.
Smaller connector enters higher; an orphaned water heater means rechecking the vent.
Vent terminal clearances to windows, intakes, the meter and sidewalks, flagged to check B149.1:25.
Vent terminal clearances to windows, intakes, the meter and sidewalks, flagged to check B149.1:25.
Gas on, everything off: a moving test dial means a leak; soap every joint the test missed.
Gas on, everything off: a moving test dial means a leak; soap every joint the test missed.
1 psi = 27.7 in w.c. · 1 kW = 3,412 Btu/h · inlet: NG 7 in w.c., propane 11 in w.c.
1 psi = 27.7 in w.c. · 1 kW = 3,412 Btu/h · inlet: NG 7 in w.c., propane 11 in w.c.

Take a Look at the 9 Parts and 64 Topics

The G2 Job and the Gas System

pp. 5-11
  1. What a G2 Can Do That a G3 Can't
  2. How the G2 Exam Works
  3. The Gas System From Meter to Burner
  4. Natural Gas vs Propane at a Glance
  5. Odorant, Leaks and the First Thing You Do
  6. Reading the Code Without Getting Lost
  7. Rating Plates and What They Tell You

Pressure, Units and Conversions

pp. 12-18
  1. kPa, Inches of Water Column and psi on One Ruler
  2. Typical Pressures in a House
  3. Gauge vs Absolute Pressure
  4. The U-Tube and the Digital Manometer
  5. kW, BTU/h and MJ/h Without a Calculator Panic
  6. From Appliance Input to m³/h of Gas
  7. Clocking a Meter

Piping and Pipe Sizing

pp. 19-27
  1. Approved Piping Materials
  2. The 5 Things You Need Before Sizing a Pipe
  3. Pipe Sizing Step 1: Add Up the Load
  4. Pipe Sizing Step 2: Measure the Longest Run
  5. Pipe Sizing Step 3: Read the Table Correctly
  6. Pipe Sizing Step 4: Size Each Section
  7. Fittings, Equivalent Length and Pressure Drop
  8. Supports, Drip Legs and Sediment Traps
  9. CSST, Bonding and Protection

Regulators, Valves and Controls

pp. 28-34
  1. How a Regulator Works
  2. Regulator Vents and Vent Limiters
  3. Manual Shut-off Valves
  4. The Combination Gas Valve
  5. Thermocouples and Flame Rectification
  6. Ignition Systems in Order
  7. Furnace Sequence of Operation

Combustion and Air Supply

pp. 35-41
  1. The Combustion Triangle and Excess Air
  2. Complete vs Incomplete Combustion
  3. Carbon Monoxide: Numbers to Know
  4. Combustion Analysis Step by Step
  5. Combustion and Ventilation Air
  6. Tight Houses and Depressurization
  7. Primary Air, Orifices and Burner Adjustment

Venting

pp. 42-49
  1. Vent Categories I to IV
  2. Natural Draft: How a Category I Vent Works
  3. Vent Connectors: Slope, Length and Joints
  4. Common Venting Two Appliances
  5. Masonry Chimneys and Liners
  6. Condensing Appliances and Plastic Venting
  7. Vent Termination Clearances
  8. Spillage and Draft Testing

Testing, Purging and Start-up

pp. 50-57
  1. Pressure Test: Why, When and With What
  2. Pressure Test Step by Step
  3. Finding the Leak
  4. Leak Test at Operating Pressure
  5. Purging Piping Safely
  6. Appliance Start-up in Order
  7. Temperature Rise and Airflow
  8. Tagging, Records and Handing Over

Propane

pp. 58-63
  1. Propane Basics for the G2
  2. Cylinders vs Tanks
  3. Two-Stage Regulation
  4. Container Location and Clearances
  5. Vaporization and Cold Weather
  6. Converting an Appliance to Propane

Review and Exam Day

pp. 64-68
  1. The 10 Numbers to Know Cold
  2. The 6 Procedures, Same Order Every Time
  3. The Most Common Exam Traps
  4. Most Common Installation Mistakes on the Job
  5. Your Last 2 Weeks Before the Exam

Who This Book Is For

You're studying for your G2

Every topic on its own page, so pipe sizing, venting and testing finally sit in the same order in your head.

Your exam date is booked

The exam is on a computer, multiple choice, with the clock running. The review part puts the 10 numbers and the 6 procedures on two pages, and each practice question tells you which page to go back to.

You already work with gas

Print the pages you need and keep them in the truck: clearances, test pressures and start-up steps, at a glance.

Plus: 2 Free Books

Exam-Style Practice Questions: Gas Technician 2
BONUS 1

Exam-Style Practice Questions: Gas Technician 2

Multiple-choice questions written like the computer-based exam, each with the answer explained and the page to go back to, so you find your weak spots before exam day.

The 15 Most Common Gas Installation Mistakes, Before and After
BONUS 2

The 15 Most Common Gas Installation Mistakes, Before and After

Each mistake drawn next to the correct installation (vent slope, drip leg, regulator vent, clearances), so you spot it on the exam and on the job.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I already work in HVAC or plumbing and want my G2?

Yes. It doesn't explain what a wrench is: it goes straight to the G2 topics, pipe sizing, venting, testing and propane. It doesn't replace your course manual or your code book: it puts each of those topics on one drawn page, always in the same order, so you can review them in the evenings without rereading 40 pages.

Where does the content come from?

It's written for Ontario, not the US: based on the current editions of CSA B149.1 and B149.2, Ontario Regulation 215/01 and the Gas Technician 2 scope published by TSSA. Units are metric first (kPa, m³/h, kW), with in w.c., psig and Btu/h beside them, as you'll see them on the job. No code text or tables are reproduced, and each code number carries a note so you can find it in your own code book.

Is this official material?

No. It's an independent illustrated study book, not produced, approved or endorsed by TSSA, CSA Group or any training provider.

Does it replace my course or training?

No. It's a study aid next to your course, your code book and your hours on the job. It doesn't replace the training or the certificate you need to work on gas.

Are the practice questions the real exam questions?

No. They're written for this book, multiple-choice like the exam, each with the answer explained and the page to go back to.

When and how do I get it?

The book and the 2 bonus books come as PDFs by email, to the address you enter at checkout. It's a one-time payment, with no subscription.

I'm not in Ontario. Is it for me?

It's built for Ontario's Gas Technician 2 exam and Ontario Regulation 215/01. The CSA B149.1 code topics apply across Canada, but other provinces have their own certificates and exams, so check your province's requirements first.

Can I have it on paper?

Yes. Print it at home or at a print shop, and keep the pages you use most in the truck.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

CA$ 34.99CA$ 79.99
Get the book · CA$ 34.99

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Chimney & Wood Heat Illustrated

Wood stoves, inserts, clearances to combustibles, flue pipe, chimney height, draft, sweeping and Level 1, 2 and 3…

From CA$ 34.99 CA$ 79.99

2nd Class Power Engineer Illustrated

The 2nd Class Power Engineer syllabus explained one topic per page: boilers, fittings and safety valves, steam tables…

From CA$ 34.99 CA$ 79.99