Study in Pictures🌐 English (United States)
UST Installer Illustrated

Digital book in PDF · read it on your phone or print it

UST Installer Illustrated

For the ICC UST installation/retrofit and decommissioning exams and state installer programs. Tank types, backfill, hold-downs, piping, sumps, spill buckets, release detection, cathodic protection and closure: each topic on its own page, the drawing first, then what you need to remember.

  • 69 illustrated pages
  • English
  • 30-day guarantee
US$ 27US$ 63
Get the book · US$ 27

Price shown for: United States. In other countries, the checkout shows the price that applies there.

About this book

What it is

For the ICC UST installation/retrofit and decommissioning exams and state installer programs. Tank types, backfill, hold-downs, piping, sumps, spill buckets, release detection, cathodic protection and closure: each topic on its own page, the drawing first, then what you need to remember.

Who This Book Is For
  • You're studying for the installer exam
  • Your exam date is close
  • You already work fuel sites
What it covers
  1. The Whole System at a Glance
  2. Tanks, Excavation & Backfill
  3. Piping, Sumps & Dispensers
  4. Spill, Overfill & Venting
  5. Release Detection
  6. Corrosion & Cathodic Protection
  7. Testing, Repairs & Records
  8. Closure & Removal
  9. Exam Review
Language
English (United States)
Pages
69
Format
Digital book in PDF · read it on your phone or print it
Price
US$ 27 (United States)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

Spill bucket, fill pipe, drop tube, tank, STP, piping, UDC, dispenser: one numbered route.
Spill bucket, fill pipe, drop tube, tank, STP, piping, UDC, dispenser: one numbered route.
FRP, steel with cathodic protection, composite: the main federal tank options of 40 CFR 280.20(a).
FRP, steel with cathodic protection, composite: the main federal tank options of 40 CFR 280.20(a).
Pressurized = ALLD + annual tightness test or monthly monitoring (40 CFR 280.41(b))
Pressurized = ALLD + annual tightness test or monthly monitoring (40 CFR 280.41(b))
Drop tube: fuel delivered near the bottom to limit splash and static (NFPA 30)
Drop tube: fuel delivered near the bottom to limit splash and static (NFPA 30)
Tanks every 30 days · pressurized: ALLD + annual test or monthly · U.S. suction: test every 3 years or monthly · safe suction: none
Tanks every 30 days · pressurized: ALLD + annual test or monthly · U.S. suction: test every 3 years or monthly · safe suction: none
Impressed current: inspect the rectifier every 60 days and keep the last three logs.
Impressed current: inspect the rectifier every 60 days and keep the last three logs.
Tank tightness test: 0.1 gal/hr, Pd 0.95, Pfa 0.05 — and within 30 days of a repair.
Tank tightness test: 0.1 gal/hr, Pd 0.95, Pfa 0.05 — and within 30 days of a repair.
Temporary closure: CP and detection stay on; at 3 months cap all but vents; substandard systems close after 12 (40 CFR 280.70)
Temporary closure: CP and detection stay on; at 3 months cap all but vents; substandard systems close after 12 (40 CFR 280.70)

Take a Look at the 9 Parts and 65 Topics

The Whole System at a Glance

pp. 5-10
  1. One Drawing, Fill Pipe to Dispenser
  2. What Counts as a UST (and What Doesn't)
  3. Who Writes the Rules You'll Be Tested On
  4. The 2015 Rule: What Changed for Installers
  5. Installation Certification: The Six Methods
  6. Words the Exam Uses, Drawn

Tanks, Excavation & Backfill

pp. 11-20
  1. Three Tank Types Side by Side
  2. Single Wall vs. Double Wall
  3. Receiving and Checking the Tank on Site
  4. Digging Safely: The Excavation Page
  5. Sizing the Hole: Clearances
  6. Backfill: Only What the Tank Manufacturer Allows
  7. Placing Backfill in Lifts
  8. Water Table vs. Empty Tank: Why Tanks Float
  9. Hold-Downs: Deadmen or Slab
  10. Cover and Traffic Loads

Piping, Sumps & Dispensers

pp. 21-29
  1. Pressurized vs. Suction: Spot the Difference
  2. Safe Suction vs. U.S. Suction
  3. Rigid vs. Flexible Piping
  4. The Piping Trench
  5. Flex Connectors and Entry Boots
  6. The Tank-Top (STP) Sump
  7. Under-Dispenser Containment (UDC)
  8. Shear Valve: Anchored and Level
  9. Transition and Product Compatibility

Spill, Overfill & Venting

pp. 30-35
  1. The Spill Bucket
  2. Fill Pipe and Drop Tube
  3. Overfill: Three Devices, Three Trip Points
  4. Vent Lines
  5. Stage I Vapor Recovery
  6. Tank-Top Fittings Map

Release Detection

pp. 36-44
  1. The Detection Map: What Goes With What
  2. Interstitial Monitoring
  3. Automatic Tank Gauging (ATG)
  4. SIR, Vapor and Groundwater Monitoring
  5. Manual Tank Gauging and Inventory Control
  6. Automatic Line Leak Detector (ALLD)
  7. Line Tightness Test
  8. 30-Day Walkthrough and Annual Checks
  9. Suspected Release: The First 24 Hours

Corrosion & Cathodic Protection

pp. 45-50
  1. Why Buried Steel Corrodes
  2. Galvanic (Sacrificial) Anodes
  3. Impressed Current Systems
  4. Electrical Isolation
  5. The -850 mV Test
  6. Internal Lining

Testing, Repairs & Records

pp. 51-56
  1. Tank Tightness Test
  2. Testing Spill Buckets and Sumps
  3. Repairs Done by the Rule
  4. Retrofitting an Existing Site
  5. How Long to Keep Each Record
  6. Operator Training: A, B, C

Closure & Removal

pp. 57-64
  1. Temporary vs. Permanent Closure
  2. Notify First: The 30-Day Rule
  3. The Closure Order
  4. Emptying: What 'Empty' Means
  5. Inerting and Purging
  6. Cleaning and Confined Space
  7. Pulling the Tank or Closing in Place
  8. Site Assessment and Sampling

Exam Review

pp. 65-69
  1. The Numbers Page
  2. Pipe Type → Detection Method
  3. Installation Day Checklist
  4. Closure Day Checklist
  5. How to Use Your Code Book in the Exam

Who This Book Is For

You're studying for the installer exam

You see the whole system first, then one topic a night, always in the same order, with the code reference right on the page.

Your exam date is close

The exam review pulls the numbers, the pipe-to-detection table and the closure order onto a few pages you can go over the night before.

You already work fuel sites

You get the reason behind what you do every day, drawn clearly enough to show your crew why a sump stays dry or a tank gets anchored.

Plus: 2 Free Books

UST Exam Practice: Exam-Style Questions with Answers
BONUS 1

UST Exam Practice: Exam-Style Questions with Answers

Test yourself topic by topic with exam-style questions, each answer explained and pointed back to the page that covers it.

15 Common UST Mistakes, Before & After
BONUS 2

15 Common UST Mistakes, Before & After

The most frequent field mistakes, from loose backfill to dry sumps to skipped inerting, each drawn wrong and right on a single page.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've been doing this work for years?

Yes. It's not a beginner's book. It puts the rules behind the work you already know into drawings, in the order the exam asks about them.

Does it cover my state's exam, and is it up to date?

It's built on the federal rule every state program starts from: EPA 40 CFR Part 280 as revised in 2015, plus PEI RP100, API RP 1604 and RP 1615, NFPA 30 and 30A, and OSHA 29 CFR 1926 Subpart P. Where states can be stricter (detection, records, notice periods), the page says so, so you check that one point in your state program and in the code edition your exam uses.

Is it official? Do I get a certificate?

No. It's an independent study guide, not published or endorsed by ICC, the EPA or any state agency. It covers the topics of UST installation, retrofit and closure exams built on 40 CFR 280. Check your state's exam outline for anything it adds.

Does it replace my training course?

No. It doesn't replace your course, your code book or your company's safety training. It helps you see and review what you study there.

Are the practice questions the ones on the exam?

No. They're exam-style questions written for this book, each one with its answer explained and the page that covers it.

When and how do I get it?

The book and the 2 bonus books come as PDFs by email, sent to the address you enter when you pay.

Do I have to pay every month?

No. You pay once. No subscription.

Can I have it on paper?

We don't ship a printed book: it's a PDF. It prints fine at home or at a print shop, so you can keep a copy in the truck.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

US$ 27US$ 63
Get the book · US$ 27

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Concrete Field Testing Illustrated

Get ready for your concrete field testing technician exam with one illustrated page per topic: sampling, temperature…

From US$ 27 US$ 63

Concrete Contractor Illustrated

Concrete construction explained one topic per page, every topic drawn: mix, subgrade, formwork, rebar, placing…

From US$ 27 US$ 63

Tile Contractor Illustrated

Tile installation explained one topic per page, every topic drawn: substrates and deflection, layout without slivers…

From US$ 27 US$ 63

Paver Installer Illustrated

The paver installer's study book with every topic drawn: the pavement cross-section layer by layer, excavation depth by…

From US$ 27 US$ 63

Earthwork & Paving Illustrated

Earthwork and paving explained one topic per page, every concept drawn: read grading plans at a glance, work cut and…

From US$ 27 US$ 63

Roofing Contractor Illustrated

The roofing trade, one topic per page, every page a clear drawing: roof anatomy, pitch and squares with worked…

From US$ 27 US$ 63