Study in Pictures🌐 English (United States)
Roofing Contractor Illustrated

Digital book in PDF · read it on your phone or print it

Roofing Contractor Illustrated

Roof anatomy, pitch and squares, underlayment, asphalt shingles, flashing, metal and tile, low-slope systems, ventilation math and fall protection. Every topic gets its own page: the drawing first, then what you need to remember.

  • 66 illustrated pages
  • English
  • 30-day guarantee
US$ 27US$ 63
Get the book · US$ 27

Price shown for: United States. In other countries, the checkout shows the price that applies there.

About this book

What it is

Roof anatomy, pitch and squares, underlayment, asphalt shingles, flashing, metal and tile, low-slope systems, ventilation math and fall protection. Every topic gets its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're studying for your license
  • Your exam date is set
  • You already run your own crews
What it covers
  1. The Exam and the Roof
  2. Pitch and Roof Math
  3. Underlayment and Edges
  4. Asphalt Shingles
  5. Flashing
  6. Metal, Tile, Wood and Slate
  7. Low-Slope Systems
  8. Ventilation and Reroofing
  9. Safety and Final Review
Language
English (United States)
Pages
66
Format
Digital book in PDF · read it on your phone or print it
Price
US$ 27 (United States)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

CA C-39: Law and Business + trade exam · FL: open book, Pearson VUE, apply 30 days ahead
CA C-39: Law and Business + trade exam · FL: open book, Pearson VUE, apply 30 days ahead
2,350 sq ft → 23.5 squares → 71 bundles before waste
2,350 sq ft → 23.5 squares → 71 bundles before waste
Felt D226/D4869, synthetic D8257, self-adhered D1970: 2 in laps, 4 in end laps, 6 ft offset
Felt D226/D4869, synthetic D8257, self-adhered D1970: 2 in laps, 4 in end laps, 6 ft offset
3-tab, architectural, designer: 1 square = 100 sq ft, often 3 bundles, sometimes 4 or 5
3-tab, architectural, designer: 1 square = 100 sq ft, often 3 bundles, sometimes 4 or 5
Step flashing: minimum 4 × 4 in, one piece per course, siding over it (IRC R905.2.8.3, check your edition).
Step flashing: minimum 4 × 4 in, one piece per course, siding over it (IRC R905.2.8.3, check your edition).
Metal panels: standing seam 1/4:12 · lapped with sealant 1/2:12 · without sealant 3:12
Metal panels: standing seam 1/4:12 · lapped with sealant 1/2:12 · without sealant 3:12
Low-slope membranes: ¼:12 minimum (2%) · coal-tar BUR: 1/8:12 · overflow drains under the IBC
Low-slope membranes: ¼:12 minimum (2%) · coal-tar BUR: 1/8:12 · overflow drains under the IBC
Strip only what you can dry in today; sealing temp per manufacturer
Strip only what you can dry in today; sealing temp per manufacturer

Take a Look at the 9 Parts and 62 Topics

The Exam and the Roof

pp. 5-12
  1. How State Roofing Exams Work
  2. The Books Behind the Questions
  3. How to Read a Code Section in 60 Seconds
  4. Roof Shapes You Must Name
  5. Every Part of a Roof, Labeled
  6. Rafters, Trusses and What Holds the Deck
  7. The Roof Deck: Plywood, OSB and Boards
  8. The Roof in Section: Layer by Layer

Pitch and Roof Math

pp. 13-21
  1. Pitch: Rise Over 12 Inches of Run
  2. Pitch to Degrees and Back
  3. Low Slope vs. Steep Slope
  4. Roof Area, Plane by Plane
  5. The Pitch Factor
  6. Squares and Bundles
  7. Waste Factor by Roof Type
  8. Hips, Valleys, Ridge Cap and Starter
  9. Full Takeoff, Worked Start to Finish

Underlayment and Edges

pp. 22-27
  1. Underlayment Types
  2. Minimum Slopes: The Table to Memorize
  3. Double Underlayment Between 2:12 and 4:12
  4. Ice Barrier: Where and How Far
  5. Drip Edge: Under at the Eave, Over at the Rake
  6. Starter Course and Edge Overhang

Asphalt Shingles

pp. 28-35
  1. 3-Tab, Architectural and Designer Shingles
  2. The Nailing Zone
  3. Roofing Nails: The Specs
  4. Exposure and Offset
  5. Laying Sequence, Course by Course
  6. Hip and Ridge Cap
  7. Valleys: Open, Closed-Cut, Woven
  8. Wind, Fire and Impact Ratings

Flashing

pp. 36-41
  1. Step Flashing at Sidewalls
  2. Headwall and Apron Flashing
  3. Kickout Flashing
  4. Chimneys and the 30-Inch Cricket
  5. Pipes, Vents and Skylights
  6. Flashing Metals and Galvanic Corrosion

Metal, Tile, Wood and Slate

pp. 42-46
  1. Metal Roofing: Standing Seam vs. Exposed Fastener
  2. Clay and Concrete Tile
  3. Wood Shakes and Shingles
  4. Slate
  5. Choosing the System by Slope and Load

Low-Slope Systems

pp. 47-53
  1. Drainage: The ¼-Inch Rule
  2. Built-Up Roofing (BUR)
  3. Modified Bitumen
  4. TPO and PVC: Welded Seams
  5. EPDM
  6. Insulation, Tapered Systems and Cover Board
  7. Edges, Curbs and Penetrations on Low-Slope

Ventilation and Reroofing

pp. 54-59
  1. Why the Attic Breathes
  2. The 1/150 and 1/300 Rule
  3. Ventilation Math, Worked
  4. Recover vs. Tear-Off
  5. Tear-Off and Deck Inspection
  6. Dry-In and Weather Calls

Safety and Final Review

pp. 60-66
  1. Fall Protection Starts at 6 Feet
  2. Low-Slope Roofs: Warning Lines and Monitors
  3. Ladders on the Roof Job
  4. Heat, Hot Work and Material Hazards
  5. The Numbers Page
  6. Mix-Ups That Cost Points
  7. Your Last-Week Review Plan

Who This Book Is For

You're studying for your license

You already know the roof. The book puts every topic in the words and numbers the exam uses, one page at a time, so you can review in the truck or at the kitchen table.

Your exam date is set

The numbers page, the mix-ups that cost points and a last-week plan show you what to go over and in what order. The practice questions show where you stand.

You already run your own crews

Give your crew leads the same drawn pages for flashing, valleys and nailing, so everyone learns it in the same order and explains it the same way.

Plus: 2 Free Books

Roofing Exam Practice Questions
BONUS 1

Roofing Exam Practice Questions

Exam-style questions on pitch, squares, flashing, low-slope and safety, each answer explained with the page to go back to, so you see where you stand before test day.

Roofing Quick-Reference Cards
BONUS 2

Roofing Quick-Reference Cards

The numbers you keep looking up on one-page cards: pitch-to-degree table, squares and bundles, nailing pattern, ventilation steps. Print them and keep them in the truck.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've been roofing for years and haven't taken a test in decades?

Yes. It doesn't teach you to roof from scratch: it starts from the roof you already know and puts each topic in the words and numbers the exam asks for, one drawn page at a time.

Does it work for my state's exam?

It's built on the codes most state roofing exams draw from: the International Residential Code (Chapters 8 and 9), IBC Chapter 15 and OSHA 29 CFR 1926 Subparts M and X, plus candidate bulletins from boards like California CSLB (C-39), Florida DBPR, Arizona ROC and Nevada NSCB. Code values are flagged on each page so you can check them against the edition your state enforces.

Is this official material?

No. It's an independent illustrated study guide. It isn't published or endorsed by any state license board, the ICC or OSHA, and it doesn't come with a certificate or count as course hours: your license comes from passing your state's exam.

Does it replace a prep course or the code book?

No. It covers the trade part of the exam: the roof, the code values and job-site safety. The business and law test (California's Law and Business, Florida's Business and Finance, Arizona's business management exam) isn't in this book. For that part, and for the reference books if your exam is open book, use the list your state board publishes.

Are the practice questions the ones on the exam?

No. They're written for this book, in the style of a trade exam, and each answer points you back to the page that explains it.

When and how do I get it?

The book and the 2 bonus books come as a PDF by email, sent to the address you enter at checkout.

Do I have to pay every month?

No. It's a one-time payment. No subscription.

Can I get it on paper?

It's a PDF, ready to print. Print it at home or at any print shop and keep it in the truck.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

US$ 27US$ 63
Get the book · US$ 27

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Concrete Field Testing Illustrated

Get ready for your concrete field testing technician exam with one illustrated page per topic: sampling, temperature…

From US$ 27 US$ 63

Concrete Contractor Illustrated

Concrete construction explained one topic per page, every topic drawn: mix, subgrade, formwork, rebar, placing…

From US$ 27 US$ 63

Tile Contractor Illustrated

Tile installation explained one topic per page, every topic drawn: substrates and deflection, layout without slivers…

From US$ 27 US$ 63

Paver Installer Illustrated

The paver installer's study book with every topic drawn: the pavement cross-section layer by layer, excavation depth by…

From US$ 27 US$ 63

Earthwork & Paving Illustrated

Earthwork and paving explained one topic per page, every concept drawn: read grading plans at a glance, work cut and…

From US$ 27 US$ 63

Masonry Contractor Illustrated

Brick, block, stone, mortar, veneer and estimating, one topic per page with a big clear drawing on every page. Made for…

From US$ 27 US$ 63