Study in Pictures🌐 English (United States)
Manufactured Home Installer Illustrated

Digital book in PDF · read it on your phone or print it

Manufactured Home Installer Illustrated

The data plate and wind zones, soil bearing, footings, pier spacing, leveling, the marriage line, anchors and ties, crossovers, skirting. Each topic gets its own page: the drawing first, then what you need to remember.

  • 68 illustrated pages
  • English
  • 30-day guarantee
US$ 27US$ 63
Get the book · US$ 27

Price shown for: United States. In other countries, the checkout shows the price that applies there.

About this book

What it is

The data plate and wind zones, soil bearing, footings, pier spacing, leveling, the marriage line, anchors and ties, crossovers, skirting. Each topic gets its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're working toward your license
  • Your exam date is set
  • You already run installs
What it covers
  1. The License and the Rulebook
  2. Reading the Home and the Site
  3. Soil and Footings
  4. Piers and Leveling
  5. The Marriage Line
  6. Anchoring and Wind Zones
  7. Crossovers and Utilities
  8. Skirting, Ventilation and Final Inspection
  9. Review: Exam Day and Common Mistakes
Language
English (United States)
Pages
68
Format
Digital book in PDF · read it on your phone or print it
Price
US$ 27 (United States)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

Part 3285 is the federal minimum; your state and the DAPIA-approved instructions can require more.
Part 3285 is the federal minimum; your state and the DAPIA-approved instructions can require more.
Data plate (24 CFR 3280.5): wind zone + roof load zone; thermal zone on the Heating Certificate.
Data plate (24 CFR 3280.5): wind zone + roof load zone; thermal zone on the Heating Certificate.
psf = weight one square foot of soil holds; current default 1,500 psf (24 CFR 3285.202)
psf = weight one square foot of soil holds; current default 1,500 psf (24 CFR 3285.202)
Adjustable piers: within listed loads, riser out 2 in max (24 CFR 3285.304(d), 3285.310(b)).
Adjustable piers: within listed loads, riser out 2 in max (24 CFR 3285.304(d), 3285.310(b)).
Interior close-up is 1 of the 11 inspection elements in 24 CFR 3286.505.
Interior close-up is 1 of the 11 inspection elements in 24 CFR 3286.505.
Inspection checks anchors, soil class, stabilizer plates, angle of pull (24 CFR 3286.505)
Inspection checks anchors, soil class, stabilizer plates, angle of pull (24 CFR 3286.505)
Duct, electrical, water, drain and gas: the 5 crossovers of a double-wide, mapped on one page
Duct, electrical, water, drain and gas: the 5 crossovers of a double-wide, mapped on one page
Skirting: 3285.504 sets materials, 3285.505 sets vents and access; the maker sets the mounting details.
Skirting: 3285.504 sets materials, 3285.505 sets vents and access; the maker sets the mounting details.

Take a Look at the 9 Parts and 64 Topics

The License and the Rulebook

pp. 5-10
  1. Who Writes the Rules: HUD, Your State, the Manufacturer
  2. HUD-Administered State or State Program?
  3. Getting Licensed Under 24 CFR 3286
  4. What the Installer Signs: Certification and Inspection
  5. How to Read a Section of 3285
  6. Words the Exam Uses That the Crew Doesn't

Reading the Home and the Site

pp. 11-18
  1. The Data Plate: Three Zones in One Sticker
  2. HUD Wind Zones I, II and III
  3. Roof Load Zones: North, Middle, South
  4. Site Check Before the Home Arrives
  5. Flood Hazard Areas
  6. Drainage: Half an Inch per Foot, First 10 Feet
  7. Clearing and Grading Under the Home
  8. Ground Moisture: The 6-Mil Vapor Retarder

Soil and Footings

pp. 19-26
  1. Soil Bearing Capacity in Pounds per Square Foot
  2. The Soil Classification Table
  3. Testing Soil: Pocket Penetrometer and Torque Probe
  4. Frost Line: Why Footings Go Deeper Up North
  5. Footing Materials: Concrete, ABS Pads, Precast
  6. Footing Size: Area × Soil = Capacity
  7. Worked Example: Picking the Footing for a Pier Load
  8. Footing Placement Rules

Piers and Leveling

pp. 27-35
  1. Where Piers Go: Main Frame, Perimeter, Marriage Line
  2. Pier Spacing: Reading the Manufacturer's Table
  3. Worked Example: Spacing Along the I-Beam
  4. Concrete Block Piers: Single or Double Stack
  5. Caps, Shims and Wedges
  6. Steel and Manufactured Piers
  7. Frame Clearance: 12 Inches Under the I-Beam
  8. Leveling the Home Step by Step
  9. Signs of a Bad Level: Doors, Windows, Seams

The Marriage Line

pp. 36-42
  1. What the Marriage Line Carries
  2. Piers at Openings 48 Inches and Wider
  3. Ridge Columns and Point Loads
  4. Pulling the Halves Together
  5. Fastening Floor, Walls and Roof Across the Seam
  6. Sealing the Seam: Gaskets, Ridge Cap, Weather
  7. Interior Close-Up Across the Marriage Line

Anchoring and Wind Zones

pp. 43-50
  1. Why Homes Need Anchors: Uplift, Sliding, Overturning
  2. Ground Anchors: 3,150 lb Working Load
  3. Matching the Anchor to the Soil Class
  4. Installing the Anchor to Full Depth
  5. Diagonal Ties to the Frame
  6. Vertical Ties Over the Roof or Wall
  7. Tie Spacing and Zone II–III Requirements
  8. Tensioning and Checking Ties

Crossovers and Utilities

pp. 51-58
  1. What Counts as a Crossover
  2. Duct Crossover: Supported, Insulated, No Kinks
  3. Electrical Crossover and Bonding
  4. Electrical Tests Before Occupancy
  5. Water Crossover and Pressure Test
  6. Drain Crossover: Slope and Support
  7. Gas Crossover and Leak Test
  8. Venting Through the Skirting: Dryer and Combustion Air

Skirting, Ventilation and Final Inspection

pp. 59-63
  1. Skirting: Materials and Clearances
  2. Crawlspace Ventilation: 1 sq ft per 150 sq ft
  3. Access Opening Under the Home
  4. Exterior Close-Up: Steps, Doors, Gutters
  5. Final Inspection Walk-Through

Review: Exam Day and Common Mistakes

pp. 64-68
  1. The Numbers to Know Cold
  2. The Setup Sequence on One Page
  3. Calculations Recap: Footing, Spacing, Ventilation
  4. Frequent Setup Mistakes, Drawn
  5. Exam Day Checklist

Who This Book Is For

You're working toward your license

You've set homes under someone else's license for years. Here you see what you already do with your hands, with the numbers and the words of the standard.

Your exam date is set

You review in the same order you set a home, from the data plate to final inspection, with the key numbers in a box on every page.

You already run installs

Print the pages you need and keep them in the truck: pier spacing, anchors and crossovers, ready to check before the inspector shows up.

Plus: 2 Free Books

Installer Exam Practice: Questions with Explained Answers
BONUS 1

Installer Exam Practice: Questions with Explained Answers

Test yourself on piers, anchoring, wind zones and crossovers with exam-style questions, and see in one line why each answer is right.

Common Setup Mistakes, Drawn Before/After
BONUS 2

Common Setup Mistakes, Drawn Before/After

See the most frequent installation mistakes next to the correct setup, so you spot them before the inspector does.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've been setting homes for years?

Yes. It isn't a beginner's course: it puts the standard's numbers and vocabulary on the work you already know, in the order you set a home.

Does it work for my state's exam, or only the federal standard?

It's built on the federal standards every state starts from: 24 CFR 3285 (installation), 3286 (installation program) and 3280 (data plate and zone maps), checked against the current eCFR text. Part 1 explains HUD-administered states vs. states with their own program. It doesn't cover each state's extra rules, so check your state program's requirements too. And every page reminds you that the manufacturer's instructions come first.

Is this official material?

No. It's an independent study book, not affiliated with HUD or any state program.

Does it replace the installer training course?

No. It isn't a course: it doesn't give you a certificate and it doesn't count toward training hours. If your state requires installer training, you still need it. The book is for reviewing, and it doesn't replace the manufacturer's instructions or local inspection.

Are the practice questions the ones on the exam?

No. They're written for this book to help you practice, and they aren't official exam questions.

How do I get it?

The book and the 2 bonus books come as PDFs by email.

Do I have to pay every month?

No. It's a one-time payment.

Can I have it on paper?

Yes. It's a printable PDF: print the whole book or just the pages you want to take to the job site.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

US$ 27US$ 63
Get the book · US$ 27

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Concrete Field Testing Illustrated

Get ready for your concrete field testing technician exam with one illustrated page per topic: sampling, temperature…

From US$ 27 US$ 63

Concrete Contractor Illustrated

Concrete construction explained one topic per page, every topic drawn: mix, subgrade, formwork, rebar, placing…

From US$ 27 US$ 63

Tile Contractor Illustrated

Tile installation explained one topic per page, every topic drawn: substrates and deflection, layout without slivers…

From US$ 27 US$ 63

Paver Installer Illustrated

The paver installer's study book with every topic drawn: the pavement cross-section layer by layer, excavation depth by…

From US$ 27 US$ 63

Earthwork & Paving Illustrated

Earthwork and paving explained one topic per page, every concept drawn: read grading plans at a glance, work cut and…

From US$ 27 US$ 63

Roofing Contractor Illustrated

The roofing trade, one topic per page, every page a clear drawing: roof anatomy, pitch and squares with worked…

From US$ 27 US$ 63

Masonry Contractor Illustrated

Brick, block, stone, mortar, veneer and estimating, one topic per page with a big clear drawing on every page. Made for…

From US$ 27 US$ 63