Study in Pictures🌐 English (United States)
Concrete Special Inspector Illustrated

Digital book in PDF · read it on your phone or print it

Concrete Special Inspector Illustrated

General notes, rebar callouts, bar sizes, cover, laps, anchor bolts, the batch ticket and strength acceptance. Every topic gets its own page: the drawing first, then what you need to remember.

  • 63 illustrated pages
  • English
  • 30-day guarantee
US$ 27US$ 63
Get the book · US$ 27

Price shown for: United States. In other countries, the checkout shows the price that applies there.

About this book

What it is

General notes, rebar callouts, bar sizes, cover, laps, anchor bolts, the batch ticket and strength acceptance. Every topic gets its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're studying for the certification
  • Your exam date is set
  • You already work on the steel or the pour
What it covers
  1. The Job and the Code
  2. Reading the Drawings
  3. The Bar Itself
  4. Spacing and Cover
  5. Development and Laps
  6. Embeds, Anchors and Forms
  7. The Pour and the Samples
  8. Report, Review and Common Mistakes
Language
English (United States)
Pages
63
Format
Digital book in PDF · read it on your phone or print it
Price
US$ 27 (United States)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

Category 47 = GR + 47C + 47P, and discrepancies go to the contractor first
Category 47 = GR + 47C + 47P, and discrepancies go to the contractor first
The general notes sheet: f'c, A615 Gr 60, cover, laps and special inspection in one place.
The general notes sheet: f'c, A615 Gr 60, cover, laps and special inspection in one place.
#4 = 1/2 in., #8 = 1 in.; #9 = 1.128 in., not 9/8
#4 = 1/2 in., #8 = 1 in.; #9 = 1.128 in., not 9/8
Cast against earth: 3 in. of cover for all members and all bar sizes (ACI 318-19 Table 20.5.1.3.1).
Cast against earth: 3 in. of cover for all members and all bar sizes (ACI 318-19 Table 20.5.1.3.1).
Development length: never under 12 in., and Grade 80 bars multiply it by 1.15
Development length: never under 12 in., and Grade 80 bars multiply it by 1.15
Anchor bolts: diameter, embedment, projection, edge distance and location, checked against the drawings before the pour.
Anchor bolts: diameter, embedment, projection, edge distance and location, checked against the drawings before the pour.
ASTM C94 ticket: plant, ticket no., truck, class, yards, time loaded, water added with initials.
ASTM C94 ticket: plant, ticket no., truck, class, yards, time loaded, water added with initials.
Rule 1: every 3-test average ≥ f'c · Rule 2: no test more than 500 psi below (f'c ≤ 5,000).
Rule 1: every 3-test average ≥ f'c · Rule 2: no test more than 500 psi below (f'c ≤ 5,000).

Take a Look at the 8 Parts and 59 Topics

The Job and the Code

pp. 5-11
  1. What a Special Inspector Actually Signs
  2. Your Map of IBC Chapter 17
  3. Table 1705.3, Line by Line
  4. Continuous vs. Periodic
  5. When Special Inspection Isn't Required
  6. The Statement of Special Inspections
  7. Which Code Edition Is in Force

Reading the Drawings

pp. 12-18
  1. General Notes First
  2. A Rebar Callout, Taken Apart
  3. Abbreviations That Trip People Up
  4. Plan, Section, Detail: Following the Bubble
  5. Footing, Beam and Column Schedules
  6. Placing Drawings and Bar Lists
  7. When Drawings Don't Match: RFIs and Revisions

The Bar Itself

pp. 19-25
  1. Bar Size = Eighths of an Inch
  2. Reading the Mill Marks
  3. A615, A706 and Epoxy-Coated
  4. Standard Hooks
  5. Stirrup and Tie Hooks, Including 135° Seismic
  6. Rust, Mill Scale and Coating Damage
  7. Field Bending and Heating

Spacing and Cover

pp. 26-33
  1. Cast Against Earth: 3 Inches
  2. Exposed to Earth or Weather: 2" or 1-1/2"
  3. Interior Slabs, Walls, Beams and Columns
  4. Measure Cover to the Outermost Steel
  5. Placement Tolerances on Cover and Depth
  6. Minimum Clear Spacing Between Bars
  7. Maximum Spacing in Slabs
  8. Chairs, Bolsters and Ties That Hold the Cover

Development and Laps

pp. 34-40
  1. Development Length in One Picture
  2. Class A vs. Class B Tension Laps
  3. Top Bars Need Longer Laps
  4. Contact and Noncontact Laps
  5. Staggered Laps and Where Not to Splice
  6. Column Dowels and Offset Bends
  7. Mechanical Couplers and Welded Splices

Embeds, Anchors and Forms

pp. 41-47
  1. Cast-In Anchor Bolts
  2. Post-Installed Anchors and the ESR
  3. Conduits, Pipes and Sleeves in Slabs
  4. Formwork: Shape, Location and Dimensions
  5. Clean Forms Before the Truck Arrives
  6. Construction Joints and Waterstops
  7. Your Pre-Pour Walk, in Order

The Pour and the Samples

pp. 48-56
  1. Reading the Batch Ticket
  2. 90 Minutes or 300 Revolutions
  3. Water Added on Site
  4. Sampling Fresh Concrete: ASTM C172
  5. Slump: ASTM C143
  6. Air Content and Temperature
  7. Making Cylinders: ASTM C31
  8. How Many Strength Tests
  9. Placement, Consolidation and Curing

Report, Review and Common Mistakes

pp. 57-63
  1. Strength Acceptance: Two Rules
  2. The Daily Report That Holds Up
  3. Writing Up a Nonconformance
  4. The Discrepancy Chain
  5. Common Inspection Mistakes
  6. Open-Book Lookup Drill
  7. The Whole Route on One Page

Who This Book Is For

You're studying for the certification

You learn each check as a drawing, with the code section marked, so you know what to look for and where it lives.

Your exam date is set

The open-book exam rewards knowing where to look. The book gives you the map before the clock starts.

You already work on the steel or the pour

Print the pages you need and take them to the site: cover, laps, anchor bolts and the batch ticket, checked in the same order every time.

Plus: 2 Free Books

Open-Book Practice Questions
BONUS 1

Open-Book Practice Questions

Exam-style questions with the answer explained and the code section where you find it, so you practice looking things up fast, not just memorizing.

Code Lookup Cheat Sheets
BONUS 2

Code Lookup Cheat Sheets

One-page sheets that show where each topic lives in IBC Chapter 17 and ACI 318, so you know which page to flip to before you open the book.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've spent years on job sites and want to move up to special inspection?

Yes. It's not a beginner's book: it starts from what you already see in the field and shows what you check, in what order, and where it lives in the code.

Where does the content come from?

From the references for the reinforced concrete special inspector exam: IBC Chapter 17, ACI 318-19, ACI 117 and the ASTM field-test standards (C172, C143, C231/C173, C1064, C31, C94). Each value has its code section next to it, so if your jurisdiction or the current ICC exam bulletin lists a different edition, you know exactly what to check.

Is this official material?

No. It's an independent illustrated study book, not ICC material, and it doesn't give you any certification: that only comes from passing the ICC exam. It doesn't reproduce code text or tables: it draws the concept and points you to the section.

Does it replace a course or the code books?

No. You still need the current code editions and your training. And it's not a reference you can bring into the exam: only the books listed in the ICC exam bulletin are allowed. The book teaches you to read them and find things fast.

Are the practice questions the ones on the exam?

No. They're written for this book, in the exam's style, with the answer explained and the code section where you find it.

When and how do I get it?

The book and the 2 bonus books come as a PDF by email, to the address you enter at checkout.

Do I have to pay every month?

No. It's a one-time payment.

Can I have it on paper?

It comes as a PDF, not a printed book. It's made to print, so you can print the pages you need and take them to the job site.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

US$ 27US$ 63
Get the book · US$ 27

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Concrete Field Testing Illustrated

Get ready for your concrete field testing technician exam with one illustrated page per topic: sampling, temperature…

From US$ 27 US$ 63

Concrete Contractor Illustrated

Concrete construction explained one topic per page, every topic drawn: mix, subgrade, formwork, rebar, placing…

From US$ 27 US$ 63

Tile Contractor Illustrated

Tile installation explained one topic per page, every topic drawn: substrates and deflection, layout without slivers…

From US$ 27 US$ 63

Paver Installer Illustrated

The paver installer's study book with every topic drawn: the pavement cross-section layer by layer, excavation depth by…

From US$ 27 US$ 63

Earthwork & Paving Illustrated

Earthwork and paving explained one topic per page, every concept drawn: read grading plans at a glance, work cut and…

From US$ 27 US$ 63

Roofing Contractor Illustrated

The roofing trade, one topic per page, every page a clear drawing: roof anatomy, pitch and squares with worked…

From US$ 27 US$ 63

Masonry Contractor Illustrated

Brick, block, stone, mortar, veneer and estimating, one topic per page with a big clear drawing on every page. Made for…

From US$ 27 US$ 63