Study in Pictures🌐 English (United States)
Cabling Installer Illustrated

Digital book in PDF · read it on your phone or print it

Cabling Installer Illustrated

From the entrance facility to the wall jack, one topic per page: pinouts, conduit fill, bonding, fiber and the tester report. You see the drawing, read the numbers next to it and know what goes where.

  • 68 illustrated pages
  • English
  • 30-day guarantee
US$ 27US$ 63
Get the book · US$ 27

Price shown for: United States. In other countries, the checkout shows the price that applies there.

About this book

What it is

From the entrance facility to the wall jack, one topic per page: pinouts, conduit fill, bonding, fiber and the tester report. You see the drawing, read the numbers next to it and know what goes where.

Who This Book Is For
  • You're studying for the INST1
  • Your exam date is coming up
  • You already work in low voltage
What it covers
  1. The Whole System on One Map
  2. Copper Cable
  3. Optical Fiber
  4. Pathways and Spaces
  5. Pulling and Installing
  6. Terminating
  7. Bonding, Firestop and Labeling
  8. Testing and Reading the Report
  9. Exam and Job-Site Review
Language
English (United States)
Pages
68
Format
Digital book in PDF · read it on your phone or print it
Price
US$ 27 (United States)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

Duplex: Tx to Rx with A-to-B cords · MPO: Methods A, B, C, U1 and U2 (TIA-568.3-E).
Duplex: Tx to Rx with A-to-B cords · MPO: Methods A, B, C, U1 and U2 (TIA-568.3-E).
Sleeves, cores and slots: riser-rated cable, listed fill limit and firestop on each
Sleeves, cores and slots: riser-rated cable, listed fill limit and firestop on each
Patch panel: 3 m (10 ft) of slack in the TR, 4 × OD bend, labels at both ends
Patch panel: 3 m (10 ft) of slack in the TR, 4 × OD bend, labels at both ends
Fusion splice: six steps, 0.3 dB maximum loss, shards in a marked container
Fusion splice: six steps, 0.3 dB maximum loss, shards in a marked container
PBB (formerly TMGB) → TBB → SBB (formerly TGB), 6 AWG minimum, sized by length
PBB (formerly TMGB) → TBB → SBB (formerly TGB), 6 AWG minimum, sized by length
Verification, qualification, certification: only the last gives a TIA category PASS/FAIL report.
Verification, qualification, certification: only the last gives a TIA category PASS/FAIL report.
OTDR: spikes are connectors or breaks, steps are splices or bends; test both ways.
OTDR: spikes are connectors or breaks, steps are splices or bends; test both ways.
100 m channel, 90 m link, 25 lbf, 0.5 in untwist, 40% fill: one sheet
100 m channel, 90 m link, 25 lbf, 0.5 in untwist, 40% fill: one sheet

Take a Look at the 9 Parts and 64 Topics

The Whole System on One Map

pp. 5-11
  1. Structured cabling as one single path
  2. The 6 subsystems in order
  3. Old names vs new names: Distributors A, B, C
  4. Hierarchical star topology
  5. Channel vs permanent link
  6. Work area basics
  7. Consolidation point and MUTOA

Copper Cable

pp. 12-19
  1. Inside a 4-pair UTP cable
  2. Cat 5e vs Cat 6 vs Cat 6A
  3. UTP, F/UTP and S/FTP
  4. Solid vs stranded conductors
  5. Multipair backbone and the 25-pair color code
  6. CMP, CMR, CM, CMX
  7. Fiber and composite ratings: OFNP, OFNR, OFN, OFCP
  8. Plenum, riser and general space

Optical Fiber

pp. 20-27
  1. How light travels in a fiber
  2. Multimode vs singlemode
  3. OM1 to OM5 and OS1/OS2 by jacket color
  4. Tight-buffered vs loose-tube cable
  5. The 12-fiber color code
  6. LC, SC and ST side by side
  7. UPC vs APC and connector colors
  8. Polarity: A-to-B

Pathways and Spaces

pp. 28-35
  1. Entrance facility and demarcation point
  2. Equipment room and telecommunications room
  3. Rack layout and cable management
  4. Conduit fill: 53, 31, 40
  5. Conduit runs: bends and pull boxes
  6. J-hooks, cable tray and ladder rack
  7. Separation from power and EMI sources
  8. Pathways through walls and floors

Pulling and Installing

pp. 36-42
  1. Before the pull: the job walk
  2. Pulling copper in 5 steps
  3. Bend radius for copper
  4. Pulling fiber
  5. Pulling lubricant and pull aids
  6. Service loops and slack
  7. Cable ties, Velcro and crush

Terminating

pp. 43-50
  1. T568A and T568B pin by pin
  2. Pairs to pins
  3. Terminating a keystone jack in 6 steps
  4. Terminating a patch panel
  5. The 110 block in 5 steps
  6. Field-terminated RJ45 plugs
  7. Fiber connector termination methods
  8. Fusion splicing in 6 steps

Bonding, Firestop and Labeling

pp. 51-56
  1. The TIA-607 bonding backbone
  2. Bonding racks, trays and shields
  3. Firestopping a penetration
  4. Firestop do's and don'ts
  5. TIA-606 labeling scheme
  6. As-built documentation

Testing and Reading the Report

pp. 57-63
  1. Verification, qualification, certification
  2. Wire map faults
  3. Length, delay and skew
  4. Insertion loss and NEXT
  5. Return loss, PSNEXT and ACR-F
  6. Fiber testing: Tier 1 with a light source and power meter
  7. Tier 2: reading an OTDR trace

Exam and Job-Site Review

pp. 64-68
  1. The numbers on one page
  2. Look-alikes that get mixed up
  3. Hands-on test checklist
  4. Job-site safety
  5. Most frequent installation errors

Who This Book Is For

You're studying for the INST1

You get the whole system as one drawn path, from the entrance facility to the wall jack, so every topic in the manual has a place to land.

Your exam date is coming up

You review all the key numbers on one page, the look-alikes side by side and the hands-on checklist, then test yourself with the practice questions.

You already work in low voltage

You keep it on hand for the job: pinouts, bend radius, fill, bonding and how to read a tester report, one page each, printed or on your phone.

Plus: 2 Free Books

Cabling Installer Practice Questions: Exam-Style Q&A with Explanations
BONUS 1

Cabling Installer Practice Questions: Exam-Style Q&A with Explanations

Test yourself on subsystems, cable ratings, fill, termination and testing, and see the page that explains every answer.

Cabling Mistakes Before & After: The Most Common Errors, Drawn
BONUS 2

Cabling Mistakes Before & After: The Most Common Errors, Drawn

See the wrong way and the right way side by side, from too much untwist at the jack to a missing firestop, so you spot them on the job.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I already terminate jacks every day?

Yes. It doesn't treat you as a beginner: it puts what you already do on one drawn map, with the standard behind each step and the numbers the BICSI manual and the TIA standards cover, like channel vs permanent link, fill, bend radius and test parameters. If you're newer, the first part gives you the whole system on one page.

Where does the content come from?

It's checked against the current editions of ANSI/TIA-568, -569, -606 and -607 and the NEC (NFPA 70, Articles 770 and 800), and it follows the topic areas of the BICSI Installer 1 written and hands-on exams: safety, pathways and spaces, pulling, copper termination, basic fiber, bonding, labeling and testing. The fusion splicing and OTDR pages go one step further, for the job. Your state or city may enforce an older NEC edition, so check which one your AHJ has adopted. Standards text and tables aren't copied: everything is explained with our own drawings.

Is this official material?

No. It's an independent illustrated study book, not affiliated with or endorsed by BICSI, TIA or NFPA. If you already have the official manual, this isn't the same text again: it's the same topics turned into one drawing per page, with the numbers you need in one box, so what takes several pages in the manual you review at a glance. Keep the manual as your reference and use this to review and to take to the job.

Does it replace the course or hands-on training?

No. It's a study book: it doesn't give you a certificate, a credential or CEC credits. The INST1 credential only comes from passing BICSI's written and hands-on exams. The book helps you understand and review, but you still need your training course, hands-on practice and the requirements of your employer and local authority.

Are the practice questions the ones on the exam?

No. They're written for this book, in an exam-style format, and every answer points to the page that explains it. They're not official questions from any exam.

When and how do I get it?

The book and the 2 bonus books come as a PDF by email, sent to the address you enter at checkout.

Do I have to pay every month?

No. It's a one-time payment. No subscription, nothing recurring.

Can I have it on paper?

Yes. The PDF is ready to print, on a home printer or at a print shop, so you can keep it in the truck or take it to the job site.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

US$ 27US$ 63
Get the book · US$ 27

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Networking & Cabling Illustrated

Networking and structured cabling explained one topic per page, each with a big, clear drawing: RJ45 pinouts T568A and…

From US$ 27 US$ 63

Video Security Systems Illustrated

Video surveillance explained one topic per page, every concept drawn: system architecture, camera types, lenses and…

From US$ 27 US$ 63

Locksmith Illustrated

An illustrated locksmith book for license and certification prep: pin tumbler cylinders, key blanks and bitting…

From US$ 27 US$ 63

Fiber Optic Technician Illustrated

Fiber optics explained one topic per page, every concept drawn: singlemode vs. multimode, LC/SC/MPO and UPC vs. APC…

From US$ 27 US$ 63

Tower Technician Illustrated

Get ready for the TTT-1 written exam with a book you can actually picture: tower anatomy, fall protection, 100%…

From US$ 27 US$ 63