Study in Pictures🌐 English (United Kingdom)
PAT Testing Illustrated

Digital book in PDF · read it on your phone or print it

PAT Testing Illustrated

Equipment classes, the plug inside out, earth continuity, insulation resistance, leakage tests, portable RCDs, pass or fail, labels and records. Every topic has its own page: the drawing first, then what you need to remember.

  • 66 illustrated pages
  • English
  • 30-day guarantee
£19.99£57.99
Get the book · £19.99

Price shown for: United Kingdom. In other countries, the checkout shows the price that applies there.

About this book

What it is

Equipment classes, the plug inside out, earth continuity, insulation resistance, leakage tests, portable RCDs, pass or fail, labels and records. Every topic has its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're studying PAT testing
  • Your 2377-77 exam is coming up
  • You already do the testing
What it covers
  1. Why we inspect and test
  2. Equipment classes and types
  3. User checks and formal visual inspection
  4. The tester and the test sequence
  5. Earth continuity
  6. Insulation resistance
  7. Leakage, polarity and functional checks
  8. Leads, RCDs and site equipment
  9. Decide, label, record and revise
Language
English (United Kingdom)
Pages
66
Format
Digital book in PDF · read it on your phone or print it
Price
£19.99 (United Kingdom)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

Class III: visual inspection only. The charger is inspected and tested as its own item.
Class III: visual inspection only. The charger is inspected and tested as its own item.
Brown L by the fuse, blue N left, green/yellow E top, terminals tight.
Brown L by the fuse, blue N left, green/yellow E top, terminals tight.
Class I four checks, Class II no earth test, Class III visual, functional, insulation if needed
Class I four checks, Class II no earth test, Class III visual, functional, insulation if needed
2 m of 1.0 mm² flex: 0.1 + 0.039 = a limit of about 0.14 Ω
2 m of 1.0 mm² flex: 0.1 + 0.039 = a limit of about 0.14 Ω
50 MΩ pass · 0.4 MΩ heater: run, retest, then decide · 0.8 MΩ Class II fail.
50 MΩ pass · 0.4 MΩ heater: run, retest, then decide · 0.8 MΩ Class II fail.
Decision flowchart: 500 V → 250 V → protective conductor or touch current, by class.
Decision flowchart: 500 V → 250 V → protective conductor or touch current, by class.
30 mA portable RCD: within 300 ms at 1 × IΔn, within 40 ms at 5 × IΔn
30 mA portable RCD: within 300 ms at 1 × IΔn, within 40 ms at 5 × IΔn
Seven steps and every limit on one printable card
Seven steps and every limit on one printable card

Take a Look at the 9 Parts and 62 Topics

Why we inspect and test

pp. 5-11
  1. What 'in-service inspection and testing' really means
  2. The law behind it: maintain, don't just test
  3. Who carries the duty
  4. Competence: what makes you the right person
  5. Most faults are found by looking
  6. The method in 7 steps
  7. How the 2377-77 exam is set out

Equipment classes and types

pp. 12-19
  1. Class I: basic insulation plus an earth
  2. Class II: double or reinforced insulation
  3. Class III and SELV
  4. Class 0 and Class 0I: what to do if you find one
  5. Telling Class I from Class II in 10 seconds
  6. Equipment types: from hand-held to fixed
  7. IT equipment and why it's handled differently
  8. Extension leads, multiway adaptors and IEC leads

User checks and formal visual inspection

pp. 20-28
  1. User checks: what the user looks for
  2. Formal visual inspection: what makes it 'formal'
  3. Before you touch: isolate and ask the user
  4. Inspecting the plug from the outside
  5. Opening the plug: wiring and terminals
  6. The cord grip: on the sheath, never on the cores
  7. The fuse: right type, right rating
  8. The flex and the appliance body
  9. Suitability and environment

The tester and the test sequence

pp. 29-34
  1. Inside the PAT tester: what each socket and lead does
  2. Checking your tester before you start
  3. Which tests, for which class
  4. The order of tests, and why it matters
  5. Pass/fail on the screen versus your own decision
  6. Your own safety while testing

Earth continuity

pp. 35-40
  1. What the earth continuity test proves
  2. Hard test or soft test: 20-25 A versus 100-200 mA
  3. The limit: 0.1 Ω plus the resistance of the flex
  4. Where to put the clip
  5. Flex the cord during the test
  6. Reading the result: three worked examples

Insulation resistance

pp. 41-46
  1. What the insulation test proves
  2. The limits: Class I 1 MΩ, Class II 2 MΩ
  3. Class II: test with the probe
  4. The switch must be ON
  5. When not to use 500 V
  6. Reading low results: fault or moisture?

Leakage, polarity and functional checks

pp. 47-53
  1. Protective conductor current: Class I
  2. Touch current: Class II
  3. Substitute leakage: when it's useful
  4. Differential leakage: measuring with the item running
  5. Polarity: L and N the right way round
  6. The functional check
  7. Choosing the leakage test: a decision page

Leads, RCDs and site equipment

pp. 54-59
  1. Extension leads: three tests and the limit
  2. Cable reels: unwind them fully
  3. IEC leads (kettle leads)
  4. Multiway adaptors and surge-protected strips
  5. Portable RCDs: test button and trip time
  6. 110 V site equipment

Decide, label, record and revise

pp. 60-66
  1. Pass or fail: the decision in 4 questions
  2. After a fail: quarantine, tell, repair or scrap
  3. Labels: what goes on them
  4. The equipment register
  5. The test record and the fault report
  6. Intervals: based on risk, not a fixed year
  7. The whole method on one page

Who This Book Is For

You're studying PAT testing

Each test has its own page and its own drawing, so the classes and limits stay apart instead of blurring together.

Your 2377-77 exam is coming up

You revise the method in the same order every evening and check yourself with the exam-style questions.

You already do the testing

Print the pages you need and keep the whole method on one card next to the tester, from the first plug to the record sheet.

Plus: 2 Free Books

PAT Testing Exam-Style Questions
BONUS 1

PAT Testing Exam-Style Questions

Multiple-choice practice in the style of the online exam, with every answer explained, so you find the gaps before the exam does.

15 PAT Testing Mistakes, Before and After
BONUS 2

15 PAT Testing Mistakes, Before and After

The most frequent mistakes in inspection, testing and recording, each drawn wrong and then right, to revise in one evening.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've been handed PAT testing at work, or I'm adding it to my electrical work?

Yes. It starts from why we test and goes all the way to limits, leakage tests and records. If you already do electrical work, the parts that take time are still there: substitute versus differential leakage, low insulation readings, IT equipment, 110 V site kit and risk-based intervals, each with its own page and its own decision.

Where does the content come from?

It follows the current IET Code of Practice for In-service Inspection and Testing of Electrical Equipment (5th edition), the edition the 2377-77 is built around, plus the Electricity at Work Regulations 1989 and HSE guidance HSG107. Everything is explained in our own words and drawings, with no text copied from the Code.

Is it official material?

No. It's an independent illustrated study book, not published, approved or endorsed by City & Guilds, the IET or the HSE. It doesn't give you a certificate: the qualification comes from passing the 2377-77 assessments with an approved centre.

Does it replace the course or the training?

No. For the practical you still need an approved course and hands-on time with a tester. What the book gives you is the order to follow at the bench: which tests for the class, where the clip goes, flexing the cord, reading a low result and deciding pass or fail, so your hands aren't waiting on your memory.

Are the practice questions the ones in the exam?

No. The questions are written for this book in the style of a multiple-choice exam. They aren't official exam questions.

When and how does it arrive?

As a PDF by email, to the address you enter at checkout.

Do I have to pay every month?

No. It's a one-off payment, with no subscription.

Can I have it on paper?

Yes. The PDF is made to print, so you can print the whole book or just the pages you want to keep with the tester.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

£19.99£57.99
Get the book · £19.99

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

The Electrician Illustrated

Electrical installation explained one topic per page, each one drawn: TN-S, TN-C-S and TT supplies, the consumer unit…

From £19.99 £57.99

Inspection & Testing Illustrated

An illustrated PDF book for UK electricians preparing for inspection and testing (2391 or equivalent): safe isolation…

From £19.99 £57.99