Study in Pictures🌐 English (United Kingdom)
The Electrician Illustrated

Digital book in PDF · read it on your phone or print it

The Electrician Illustrated

Supply systems, the consumer unit, ring and radial circuits, cable sizing, earthing and bonding, bathroom zones, safe isolation, the testing sequence, max Zs values and certificates. Each topic has its own page: the drawing first, then the values you need to remember.

  • 75 illustrated pages
  • English
  • 30-day guarantee
£19.99£57.99
Get the book · £19.99

Price shown for: United Kingdom. In other countries, the checkout shows the price that applies there.

About this book

What it is

Supply systems, the consumer unit, ring and radial circuits, cable sizing, earthing and bonding, bathroom zones, safe isolation, the testing sequence, max Zs values and certificates. Each topic has its own page: the drawing first, then the values you need to remember.

Who This Book Is For
  • You're on your Level 2 or 3 course
  • Your exam or assessment is coming up
  • You already work as an electrician
What it covers
  1. How It All Fits Together
  2. Supply Systems and Earthing Arrangements
  3. The Consumer Unit and Protective Devices
  4. Circuits and Cable Selection
  5. Earthing and Bonding
  6. Special Locations and Installation Rules
  7. Safe Isolation and the Testing Sequence
  8. Certificates and Reports
  9. Review and Exam Preparation
Language
English (United Kingdom)
Pages
75
Format
Digital book in PDF · read it on your phone or print it
Price
£19.99 (United Kingdom)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

Basic protection = insulation and enclosures · fault protection = earthing, bonding, ADS
Basic protection = insulation and enclosures · fault protection = earthing, bonding, ADS
T, N, S and C decoded: first letter the supply, second letter your installation.
T, N, S and C decoded: first letter the supply, second letter your installation.
Split load: one fault, half the circuits off · RCBO: only the faulty circuit
Split load: one fault, half the circuits off · RCBO: only the faulty circuit
Unfused spur = one point · fused spur = FCU with a fuse no bigger than 13 A
Unfused spur = one point · fused spur = FCU with a fuse no bigger than 13 A
Gas bond within 600 mm of the meter union · PME (neutral ≤ 35 mm²): 10 mm² copper
Gas bond within 600 mm of the meter union · PME (neutral ≤ 35 mm²): 10 mm² copper
Zone 1 to 2.25 m, zone 2 out 0.6 m, IPX7 / IPX4 / IPX5
Zone 1 to 2.25 m, zone 2 out 0.6 m, IPX7 / IPX4 / IPX5
Prove the tester, test L–N, L–E, N–E, then prove the tester again
Prove the tester, test L–N, L–E, N–E, then prove the tester again
GN3: domestic 10 years, rented 5 years; landlords in England must test at least every 5 years
GN3: domestic 10 years, rented 5 years; landlords in England must test at least every 5 years

Take a Look at the 9 Parts and 70 Topics

How It All Fits Together

pp. 6-12
  1. From the substation to the socket on one page
  2. Voltage, current, resistance and power
  3. Line, neutral and cpc: what each conductor does
  4. Overload, short circuit and earth fault
  5. Electric shock: basic protection and fault protection
  6. The rules behind the job: BS 7671, EAWR 1989 and Part P
  7. How BS 7671 is organised: finding a regulation fast

Supply Systems and Earthing Arrangements

pp. 13-19
  1. Reading the letters: T, N, S and C
  2. TN-S: the earth comes from the cable sheath
  3. TN-C-S (PME): the combined neutral and earth
  4. TT: your own earth electrode
  5. The three systems side by side
  6. PME restrictions: EV chargers, caravans and outbuildings
  7. Ze, PFC and what to ask the DNO

The Consumer Unit and Protective Devices

pp. 20-28
  1. Inside a consumer unit: every device and what it is for
  2. MCBs: types B, C and D
  3. Fuses: BS 88, BS 1361, BS 3036 and BS 1362
  4. RCDs: what they measure and why 30 mA
  5. RCD types: AC, A, F and B
  6. RCBOs vs split-load boards
  7. Where 30 mA RCD protection is required
  8. SPDs and AFDDs: when they are needed
  9. Discrimination: only the nearest device should trip

Circuits and Cable Selection

pp. 29-39
  1. The ring final circuit drawn
  2. Radial socket circuits next to the ring
  3. Spurs: fused and unfused
  4. Lighting circuits: loop-in and junction box
  5. Two-way and intermediate switching
  6. Cookers, showers and immersion heaters
  7. Sizing a cable: Ib ≤ In ≤ Iz
  8. Correction factors: Ca, Cg, Ci and Cf
  9. Reference methods: how the cable is installed changes its rating
  10. Voltage drop: 3% for lighting, 5% for other uses
  11. Safe zones for cables in walls

Earthing and Bonding

pp. 40-46
  1. Earthing vs bonding: two different jobs
  2. The main earthing terminal and the main earthing conductor
  3. Main protective bonding: gas, water and oil
  4. Extraneous or not? The 22 kΩ test
  5. Supplementary bonding in bathrooms: when it can be left out
  6. Disconnection times: 0.4 s, 5 s, 0.2 s, 1 s
  7. Earth fault loop impedance: Zs = Ze + (R1 + R2)

Special Locations and Installation Rules

pp. 47-52
  1. Bathrooms: zones 0, 1 and 2
  2. Sockets and switches near a bath or shower
  3. Outdoors, garages and outbuildings
  4. EV charge points: the essentials
  5. Solar PV and battery storage: what changes in the board
  6. Fire, cable support and escape routes

Safe Isolation and the Testing Sequence

pp. 53-64
  1. Safe isolation in seven steps
  2. Your test instruments and GS38
  3. The order of tests: dead first, then live
  4. Continuity of protective conductors: R1 + R2
  5. Ring final continuity: the three steps
  6. Insulation resistance: 500 V and at least 1 MΩ
  7. Polarity: single-pole devices in the line
  8. Earth electrode resistance on TT
  9. Ze and Zs: the live loop tests
  10. Prospective fault current: PSCC and PEFC
  11. RCD testing: what to test and what reading to expect
  12. Functional testing and AFDD checks

Certificates and Reports

pp. 65-69
  1. EIC, MEIWC or EICR: which one for which job
  2. Filling in the schedule of test results
  3. Observation codes: C1, C2, C3 and FI
  4. EICR in practice: periods and the private rented sector
  5. Notification and Part P

Review and Exam Preparation

pp. 70-75
  1. The exam and assessment routes at a glance
  2. Key numbers on one page
  3. Max Zs table for Type B, C and RCBOs drawn as a ladder
  4. The most frequent wiring mistakes, before and after
  5. The most frequent testing mistakes
  6. Before the AM2: your printable checklist

Who This Book Is For

You're on your Level 2 or 3 course

You study in the evenings after work. Each topic sits on one page, drawn, so you can go over it in the same order every night.

Your exam or assessment is coming up

The test sequence, the typical values and the key numbers are on a handful of pages you can go over the week before.

You already work as an electrician

You know the job. The book puts the regs, the tests and the certificates in a single sequence, ready for a re-sit or the next amendment, and ready to print for the van.

Plus: 2 Free Books

Wiring Regs Practice Questions: Exam-Style Questions with Worked Answers
BONUS 1

Wiring Regs Practice Questions: Exam-Style Questions with Worked Answers

Test yourself on circuits, protection, earthing and testing, and see why each answer is right, so you find your gaps before the exam does.

The 10 Most Common Mistakes, Before and After + Test Values Quick Cards
BONUS 2

The 10 Most Common Mistakes, Before and After + Test Values Quick Cards

See the most frequent wiring and testing mistakes drawn side by side with the correct version, plus one-page cards of the typical test values to print and keep in the van.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I already work as an electrician?

Yes. It doesn't explain what a socket is. It sets out supply systems, the board, circuits, earthing, testing and certificates in a single sequence, each one drawn. It's built for the BS 7671 wiring regs exam (such as C&G 2382), inspection and testing (such as 2391) and the final practical assessment (such as the AM2), and it also works if you're on a Level 2 or 3 course.

Where does the content come from?

It's checked against BS 7671:2018+A3:2024 (the 18th Edition with Amendment 3), the IET On-Site Guide, IET Guidance Note 3, HSE GS38 and the Electricity at Work Regulations 1989, using UK units: 230 V, 13 A, mm², Ω and MΩ.

Is it official material?

No. It's an independent study guide. It isn't published or approved by the IET, BSI or any awarding body.

I've already got the regs book and my college notes. What does this add?

The regs tell you what's required, and your notes follow the course. This book puts it all in a single sequence, one topic per page, each one drawn: the board, the circuits, earthing, the test sequence and the max Zs values side by side. It goes alongside your course, BS 7671 and your practical training. It isn't a qualification and doesn't give you a certificate.

Are the practice questions the ones from the exam?

No. They're exam-style questions written for this book, with worked answers. They aren't official questions from any exam.

When and how will I receive it?

As a PDF by email, sent to the address you enter when you pay.

Do I have to pay every month?

No. It's a one-off payment, with no subscription.

Can I have it on paper?

Yes. The PDF is ready to print, whether you want the whole book or just the pages you keep in the van.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

£19.99£57.99
Get the book · £19.99

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Inspection & Testing Illustrated

An illustrated PDF book for UK electricians preparing for inspection and testing (2391 or equivalent): safe isolation…

From £19.99 £57.99

PAT Testing Illustrated

In-service inspection and testing of electrical equipment, one topic per page and every step drawn: equipment classes…

From £19.99 £57.99