Study in Pictures🌐 English (United Kingdom)
Inspection & Testing Illustrated

Digital book in PDF · read it on your phone or print it

Inspection & Testing Illustrated

Safe isolation, R1+R2, ring final continuity, insulation resistance, Zs and the 80% rule, RCD testing, the Schedule of Test Results and C1, C2, C3 and FI coding. Each topic has its own page: the drawing first, then what you need to remember.

  • 68 illustrated pages
  • English
  • 30-day guarantee
£19.99£57.99
Get the book · £19.99

Price shown for: United Kingdom. In other countries, the checkout shows the price that applies there.

About this book

What it is

Safe isolation, R1+R2, ring final continuity, insulation resistance, Zs and the 80% rule, RCD testing, the Schedule of Test Results and C1, C2, C3 and FI coding. Each topic has its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're on the 2391 course
  • Your practical is coming up
  • You already do EICRs
What it covers
  1. Before You Pick Up the Tester
  2. Safe Isolation
  3. Inspection Before Testing
  4. Dead Tests, in Order
  5. Live Tests, in Order
  6. Maximum Zs and Disconnection Times
  7. Certificates and Schedules
  8. Periodic Inspection and EICR Coding
  9. Revision for the Practical and the Written Exam
Language
English (United Kingdom)
Pages
68
Format
Digital book in PDF · read it on your phone or print it
Price
£19.99 (United Kingdom)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

EIC for a new circuit, Minor Works for no new circuit, EICR for an existing installation
EIC for a new circuit, Minor Works for no new circuit, EICR for an existing installation
Two-pole indicator to BS EN 61243-3, GS38 probes, never a volt stick to prove dead.
Two-pole indicator to BS EN 61243-3, GS38 probes, never a volt stick to prove dead.
Inspection first, installation disconnected, Schedule of Inspections as your checklist
Inspection first, installation disconnected, Schedule of Inspections as your checklist
Dead tests per Regulation 643: continuity, ring, insulation, SELV/PELV, polarity, earth electrode (TT).
Dead tests per Regulation 643: continuity, ring, insulation, SELV/PELV, polarity, earth electrode (TT).
Regulation 643.10: switchgear, controls, interlocks, isolators and the RCD test button.
Regulation 643.10: switchgear, controls, interlocks, isolators and the RCD test button.
TN: 0.4 s and 5 s. TT: 0.2 s and 1 s. Table 41.1, U0 = 230 V.
TN: 0.4 s and 5 s. TT: 0.2 s and 1 s. Table 41.1, U0 = 230 V.
New circuit = EIC · no new circuit = Minor Works · existing condition = EICR
New circuit = EIC · no new circuit = Minor Works · existing condition = EICR
Intervals: private rented (England) 5 years · owner-occupied 10 years · construction sites 3 months · petrol stations 1 year
Intervals: private rented (England) 5 years · owner-occupied 10 years · construction sites 3 months · petrol stations 1 year

Take a Look at the 9 Parts and 64 Topics

Before You Pick Up the Tester

pp. 5-11
  1. Initial verification vs periodic inspection
  2. What the 2391 asks you to do
  3. The documents on your bench
  4. Your instruments: the multifunction tester
  5. GS38: leads and probes
  6. Calibration and checking your tester
  7. Earthing systems at a glance

Safe Isolation

pp. 12-17
  1. Why safe isolation comes first
  2. The safe isolation sequence, step by step
  3. Prove – test – prove
  4. Testing dead: every combination
  5. Locking off: MCBs, fuses and main switch
  6. Isolating for Ze and main bonding tests

Inspection Before Testing

pp. 18-23
  1. Inspection comes before testing
  2. The origin: service head to consumer unit
  3. Earthing and main protective bonding
  4. Cables, routes and zones
  5. Special locations: bathrooms
  6. RCD, AFDD and SPD: what you check by eye

Dead Tests, in Order

pp. 24-35
  1. The dead test sequence
  2. Continuity of protective bonding
  3. R1+R2: the shorting-link method
  4. R2: the wander-lead method
  5. Ring final step 1: end-to-end
  6. Ring final step 2: line–neutral cross-connection
  7. Ring final step 3: line–cpc cross-connection
  8. Insulation resistance: test voltages and minimums
  9. Insulation resistance: preparing the circuit
  10. Insulation resistance: which tests, between what
  11. Polarity, tested dead
  12. Earth electrode resistance (TT)

Live Tests, in Order

pp. 36-43
  1. The live test sequence
  2. Measuring Ze
  3. Measuring Zs
  4. Prospective fault current: PSCC and PEFC
  5. RCD testing: what you test now
  6. RCD testing: setting up the tester
  7. Functional testing
  8. Phase sequence and voltage drop

Maximum Zs and Disconnection Times

pp. 44-49
  1. Why Zs matters: the disconnection chain
  2. Disconnection times
  3. Reading the BS 7671 maximum Zs tables
  4. The 80% rule: correcting for temperature
  5. Type B, C and D: same rating, different Zs
  6. When Zs is too high: what you check

Certificates and Schedules

pp. 50-54
  1. EIC, Minor Works and EICR: which one when
  2. The Schedule of Circuit Details
  3. The Schedule of Test Results
  4. Supply characteristics and earthing arrangements
  5. Signatures and responsibility

Periodic Inspection and EICR Coding

pp. 55-62
  1. Recommended intervals
  2. Extent, limitations and sampling
  3. The four codes
  4. Coding C1: danger present
  5. Coding C2: potentially dangerous
  6. Coding C3 and when it's not a code at all
  7. FI: further investigation
  8. Satisfactory or unsatisfactory

Revision for the Practical and the Written Exam

pp. 63-68
  1. The full sequence on one page
  2. Key numbers to know
  3. Ring final readings that don't add up
  4. Zs worked corrections
  5. Most frequently asked in the written exam
  6. Practical day checklist

Who This Book Is For

You're on the 2391 course

Each evening you study one test on one page, always in the same order, so the sequence builds up instead of slipping away.

Your practical is coming up

The full sequence on one page, the key numbers and the Zs corrections, ready to go over the night before.

You already do EICRs

Coding C1, C2, C3 or FI drawn case by case, and the maximum Zs pages printed for the van.

Plus: 2 Free Books

Inspection & Testing Exam-Style Questions
BONUS 1

Inspection & Testing Exam-Style Questions

Practise with exam-style questions on every test, Zs calculation and coding, each answer explained with a drawing, so you know where you stand before the real thing.

The 15 Most Common Testing Mistakes
BONUS 2

The 15 Most Common Testing Mistakes

The errors electricians make most often on the practical and on the schedules, each one shown before and after, so you can spot them before an assessor does.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've been installing for years but have never done inspection and testing?

Yes. It doesn't teach you to wire: it starts from safe isolation and takes you through every test, the schedules and EICR coding, in the order you'll use them. It follows the UK route (BS 7671, GN3 and the 2391). If you're doing the 2394 and 2395 separately, the initial verification parts match the 2394 and the periodic inspection and EICR parts match the 2395.

Where does the content come from?

From BS 7671 (current edition and amendment), IET Guidance Note 3, the IET On-Site Guide, HSE GS38 and the 2391 qualification specification. The maximum Zs values come from the tables of the current amendment. It doesn't replace GN3 or the On-Site Guide: those are for looking things up, this is for learning the order and the numbers, one drawn page at a time.

Is it official material?

No. It's an independent study book, not published or endorsed by City & Guilds, the IET or BSI. Always keep the current BS 7671 to hand.

Does it replace the course?

No. It doesn't replace accredited training or supervised practical experience, and it doesn't give you a qualification or certificate. It helps you understand and revise what the course and the practical ask of you.

Are the practice questions the ones from the exam?

No. They're exam-style questions written for this book, not official questions from any exam.

How do I receive it?

As a PDF by email, to the address you enter at checkout. The 2 included books come the same way.

Do I have to pay every month?

No. It's a one-off payment.

Can I have it on paper?

It's a PDF you can print, all of it or just the pages you want for the van or the tester case.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

£19.99£57.99
Get the book · £19.99

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

The Electrician Illustrated

Electrical installation explained one topic per page, each one drawn: TN-S, TN-C-S and TT supplies, the consumer unit…

From £19.99 £57.99

PAT Testing Illustrated

In-service inspection and testing of electrical equipment, one topic per page and every step drawn: equipment classes…

From £19.99 £57.99