Study in Pictures🌐 English (United Kingdom)
EV Charging Installation Illustrated

Digital book in PDF · read it on your phone or print it

EV Charging Installation Illustrated

Charging modes, the control pilot, supply assessment, maximum demand, voltage drop, RCDs and DC fault protection, open-PEN earthing, testing and certification. Every topic has its own page: the drawing first, then what you need to remember.

  • 65 illustrated pages
  • English
  • 30-day guarantee
£19.99£57.99
Get the book · £19.99

Price shown for: United Kingdom. In other countries, the checkout shows the price that applies there.

About this book

What it is

Charging modes, the control pilot, supply assessment, maximum demand, voltage drop, RCDs and DC fault protection, open-PEN earthing, testing and certification. Every topic has its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're adding EV work to your trade
  • Your 2921-34 exam is booked
  • You already fit chargers
What it covers
  1. How EV charging works
  2. Site survey and supply
  3. Maximum demand and cable sizing
  4. Protection
  5. Earthing and the open-PEN problem
  6. Installation on site
  7. Testing and certification
  8. Revision and exam practice
Language
English (United Kingdom)
Pages
65
Format
Digital book in PDF · read it on your phone or print it
Price
£19.99 (United Kingdom)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

State A +12 V to F −12 V · current = duty % × 0.6 · 53 % ≈ 32 A.
State A +12 V to F −12 V · current = duty % × 0.6 · 53 % ≈ 32 A.
32 A over 25 m in 6 mm²: about 5.8 V, 2.5% of 230 V.
32 A over 25 m in 6 mm²: about 5.8 V, 2.5% of 230 V.
SPDs per Reg 443.4: required, risk-assessed or fitted, and disconnected before IR testing.
SPDs per Reg 443.4: required, risk-assessed or fitted, and disconnected before IR testing.
Broken PEN on PME: the car outdoors can sit near line voltage; 70 V rms is the limit
Broken PEN on PME: the car outdoors can sit near line voltage; 70 V rms is the limit
Supply type, then outdoors or not: the whole open-PEN decision on one page
Supply type, then outdoors or not: the whole open-PEN decision on one page
Dead tests (R1+R2, insulation, polarity, electrode) before live tests (Zs, PFC, RCD) – BS 7671 Part 6.
Dead tests (R1+R2, insulation, polarity, electrode) before live tests (Zs, PFC, RCD) – BS 7671 Part 6.
Garage, driveway, TT, three-phase, built-in device: the earthing option for each
Garage, driveway, TT, three-phase, built-in device: the earthing option for each
Diversity, Type AC, armour bridging PME to TT, SPD in the test… and the fix
Diversity, Type AC, armour bridging PME to TT, SPD in the test… and the fix

Take a Look at the 8 Parts and 61 Topics

How EV charging works

pp. 5-12
  1. The 7-step design method
  2. Charging modes 1 to 4
  3. AC or DC: where the charger really is
  4. Connectors: Type 2, Type 1, CCS and CHAdeMO
  5. Power, current and charging time
  6. The control pilot: how car and charger talk
  7. The proximity pilot and cable rating
  8. Mode 2 on a household socket: the limits

Site survey and supply

pp. 13-20
  1. The site survey in one walk-round
  2. Reading the cut-out and main fuse
  3. Identifying TN-S, TN-C-S (PME) and TT
  4. Checking the existing installation
  5. Measuring Ze and PFC at the origin
  6. Telling the DNO: connect and notify or apply first
  7. Choosing the charger position
  8. Smart charge point rules

Maximum demand and cable sizing

pp. 21-28
  1. Maximum demand: the first number
  2. No diversity on the EV circuit
  3. Load management with a CT clamp
  4. Choosing the circuit and protective device
  5. Current-carrying capacity and installation method
  6. Correction factors in practice
  7. Voltage drop: the 5% check
  8. SWA, twin and earth or flex: which cable where

Protection

pp. 29-36
  1. Overcurrent protection for the EV circuit
  2. 30 mA RCD for every charging point
  3. DC fault protection: Type B or RDC-DD
  4. RCD types AC, A, F and B at a glance
  5. The upstream RCD trap
  6. Surge protection
  7. Isolation and switching
  8. Fed from the house or from a garage sub-board

Earthing and the open-PEN problem

pp. 37-45
  1. What a broken PEN does to an outdoor car
  2. When the PME restriction applies
  3. Option 1: open-PEN protection device
  4. Option 2: a TT island for the charger
  5. The SWA armour trap on a TT island
  6. Three-phase supplies and voltage monitoring
  7. Sizing and installing the earth electrode
  8. Separation between PME and TT metalwork
  9. The earthing decision tree

Installation on site

pp. 46-51
  1. Mounting the charge point
  2. Buried cable routes
  3. Through walls and inside the house
  4. Terminations and torque
  5. Wi-Fi, app and commissioning set-up
  6. Solar PV and load-managed homes

Testing and certification

pp. 52-59
  1. The test sequence in order
  2. Continuity and R1 + R2
  3. Insulation resistance without killing the charger
  4. Zs against the device limit
  5. Testing the earth electrode on a TT island
  6. RCD and DC protection tests
  7. Functional test with a test adaptor
  8. Certificate, notification and handover

Revision and exam practice

pp. 60-65
  1. The numbers on one page
  2. The earthing questions that trip people
  3. Ten most frequent install mistakes
  4. How to read a multiple-choice question
  5. Full design walkthrough: one real house
  6. Site checklist for the van

Who This Book Is For

You're adding EV work to your trade

Every step of a charger install in the same order, from survey to certificate, with each decision drawn so it's still there after a long day on site.

Your 2921-34 exam is booked

The earthing options, the key numbers and the test sequence on pages you can revise in an evening, plus practice questions that send you back to the page that explains each answer.

You already fit chargers

A quick check on the calls that cause doubt: open-PEN earthing, DC fault protection, voltage drop on long runs. Printed, it lives in the van.

Plus: 2 Free Books

EV Exam-Style Practice Questions
BONUS 1

EV Exam-Style Practice Questions

Multiple-choice questions in the style of the online exam, each with the answer and the page that explains it, so you find your weak spots before the real thing.

15 Common EV Install Mistakes, Before and After
BONUS 2

15 Common EV Install Mistakes, Before and After

The most frequent errors on charge point installs, each drawn wrong and then right, so you can revise them at a glance the night before or in the van.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I'm already a qualified electrician adding EV chargers to my work?

Yes. It's written for electricians who already work to BS 7671 and want the EV-specific part: supply assessment, open-PEN earthing, DC fault protection and testing. It doesn't explain what an RCD is from scratch.

Where does the content come from?

It's checked against BS 7671 Section 722 (the edition and amendments in force when it was written), the IET Code of Practice for Electric Vehicle Charging Equipment Installation and the Electric Vehicles (Smart Charge Points) Regulations 2021. The exact edition of each document is listed on the first page of the book, so you can compare it with yours. The explanations and drawings are our own; no text or tables from the standards are reproduced.

Is it official material?

No. It's independent study material, not affiliated with or endorsed by City & Guilds, the IET or BSI.

Does it replace the course or training?

No. It's a study book, not a course: it doesn't give you a certificate, a qualification or scheme registration. It helps you study and revise, but it doesn't replace approved training, the City & Guilds assessment or the competence you need to install, test and certify charge points.

Are the practice questions the ones in the exam?

No. They're written for this book in multiple-choice style and aren't official questions from any exam. Each one comes with the answer and the page that explains it.

When and how does it arrive?

The book and the 2 bonus books arrive as PDFs by email, to the address you enter at checkout. You can read them on your phone, tablet or laptop, or print them.

Do I have to pay every month?

No. It's a one-off payment, with no subscription.

Can I have it on paper?

Yes. It's a printable PDF: print it at home or at a print shop and keep it in the van.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

£19.99£57.99
Get the book · £19.99

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

The Electrician Illustrated

Electrical installation explained one topic per page, each one drawn: TN-S, TN-C-S and TT supplies, the consumer unit…

From £19.99 £57.99

Inspection & Testing Illustrated

An illustrated PDF book for UK electricians preparing for inspection and testing (2391 or equivalent): safe isolation…

From £19.99 £57.99

PAT Testing Illustrated

In-service inspection and testing of electrical equipment, one topic per page and every step drawn: equipment classes…

From £19.99 £57.99