Study in Pictures🌐 English (Canada)
Welder Certification Illustrated

Digital book in PDF · read it on your phone or print it

Welder Certification Illustrated

SMAW, GMAW, FCAW and GTAW, polarity, electrode codes, weld symbols, defects, metallurgy and preheat, oxy-fuel cutting and blueprints. Every topic gets its own page: the drawing first, then what you need to remember.

  • 68 illustrated pages
  • English
  • 30-day guarantee
CA$ 34.99CA$ 79.99
Get the book · CA$ 34.99

Price shown for: Canada. In other countries, the checkout shows the price that applies there.

About this book

What it is

SMAW, GMAW, FCAW and GTAW, polarity, electrode codes, weld symbols, defects, metallurgy and preheat, oxy-fuel cutting and blueprints. Every topic gets its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're working through your apprenticeship levels
  • Your exam date is set
  • You've welded for years, here or abroad
What it covers
  1. The Exam and Shop Safety
  2. Electricity and SMAW
  3. GMAW and FCAW
  4. GTAW
  5. Oxy-Fuel, Cutting and Gouging
  6. Weld Symbols and Blueprints
  7. Metallurgy, Preheat and Distortion
  8. Defects, Testing and Positions
  9. Final Review
Language
English (Canada)
Pages
68
Format
Digital book in PDF · read it on your phone or print it
Price
CA$ 34.99 (Canada)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

E4918: 490 MPa tensile, all positions, low-hydrogen coating on AC or DCEP.
E4918: 490 MPa tensile, all positions, low-hydrogen coating on AC or DCEP.
Short circuit, globular, spray (≈80% Ar+, flat/horizontal) and pulsed spray, side by side.
Short circuit, globular, spray (≈80% Ar+, flat/horizontal) and pulsed spray, side by side.
Puddle, dab, pull back, move, dab: filler at about 15–20°, always inside the shield.
Puddle, dab, pull back, move, dab: filler at about 15–20°, always inside the shield.
Air carbon arc gouging: DCEP, air jet behind the arc, short stickout. For back-gouging and defect removal.
Air carbon arc gouging: DCEP, air jet behind the arc, short stickout. For back-gouging and defect removal.
Before cutting: scale, units (mm), tolerance, revision, and material and quantity in the BOM.
Before cutting: scale, units (mm), tolerance, revision, and material and quantity in the BOM.
Lack of fusion is at the sidewall or between passes; incomplete penetration is at the root
Lack of fusion is at the sidewall or between passes; incomplete penetration is at the root
GMAW DCEP · GTAW steel DCEN, aluminium AC · FCAW and SMAW: check the label
GMAW DCEP · GTAW steel DCEN, aluminium AC · FCAW and SMAW: check the label
7 days in exam-weight order: D 44% · B 22% · C 18% · A 16% · 70% to pass
7 days in exam-weight order: D 44% · B 22% · C 18% · A 16% · 70% to pass

Take a Look at the 9 Parts and 64 Topics

The Exam and Shop Safety

pp. 5-11
  1. What the Written Exam Actually Covers
  2. Red Seal Certificate vs Welding Ticket
  3. How to Read a Multiple-Choice Question
  4. Choosing the Right Filter Shade
  5. Fumes, Ventilation and Hexavalent Chromium
  6. Electric Shock, Fire Watch and Confined Spaces
  7. Handling and Storing Gas Cylinders

Electricity and SMAW

pp. 12-20
  1. Volts, Amps and the Arc
  2. Constant Current vs Constant Voltage
  3. Polarity: DCEP, DCEN and AC
  4. Duty Cycle and Power Sources
  5. Reading an SMAW Electrode Code
  6. Cellulosic, Rutile and Low-Hydrogen Rods
  7. Storing Low-Hydrogen Electrodes
  8. SMAW Technique: Angle, Arc Length, Speed
  9. Arc Blow and How to Stop It

GMAW and FCAW

pp. 21-27
  1. The GMAW System, Part by Part
  2. Four Metal Transfer Modes
  3. Shielding Gas for GMAW
  4. Stickout, Wire Speed and Voltage
  5. FCAW: Gas-Shielded vs Self-Shielded
  6. Push or Drag?
  7. GMAW Aluminium: Wire and Feeding

GTAW

pp. 28-33
  1. The GTAW Torch and Circuit
  2. Polarity for Steel vs Aluminium
  3. Tungsten Colours and Tip Shapes
  4. Argon Flow, Cup Size and Post-Flow
  5. Adding Filler: Dab and Walk
  6. Stainless Steel: Heat and Back-Purge

Oxy-Fuel, Cutting and Gouging

pp. 34-39
  1. Oxy-Fuel Equipment Setup
  2. Lighting, Shutting Down and Backfire
  3. Three Flames and Their Uses
  4. How an Oxy-Fuel Cut Works
  5. Plasma Arc Cutting
  6. Air Carbon Arc Gouging

Weld Symbols and Blueprints

pp. 40-48
  1. Anatomy of a Welding Symbol
  2. Arrow Side vs Other Side
  3. Decoding a Fillet Weld Symbol
  4. Groove Weld Symbols
  5. Groove Dimensions: Depth, Size, Angle, Opening
  6. Supplementary Symbols
  7. Intermittent, Chain and Staggered Welds
  8. Orthographic Views and Line Types
  9. Title Block, Scale and Bill of Materials

Metallurgy, Preheat and Distortion

pp. 49-55
  1. Weld Metal, Fusion Line and HAZ
  2. Carbon Content and Weldability
  3. Carbon Equivalent in One Formula
  4. Preheat and Interpass Temperature
  5. Hydrogen Cracking in Three Conditions
  6. Why Metal Distorts
  7. Controlling Distortion

Defects, Testing and Positions

pp. 56-64
  1. Porosity: Look, Cause, Fix
  2. Undercut and Overlap
  3. Incomplete Fusion vs Incomplete Penetration
  4. Slag Inclusions
  5. Cracks: Hot, Cold and Crater
  6. Visual Inspection and Gauges
  7. Bend Tests and NDT
  8. Welding Positions: Plate and Pipe
  9. Pipe Joint Preparation

Final Review

pp. 65-68
  1. Polarity for Every Process, on One Page
  2. Trade Math You Need for the Exam
  3. The Most Commonly Confused Pairs
  4. Last Week Before the Exam

Who This Book Is For

You're working through your apprenticeship levels

Each block of theory from school has its own drawn page, so what you see in class is easy to find and review at home.

Your exam date is set

Polarity, symbols, defects and preheat in the same order on every page, ready to review in ten minutes on a break.

You've welded for years, here or abroad

You already know the work. The book puts the theory, the metric units and the Canadian terms next to what your hands do.

Plus: 2 Free Books

Welder Exam Practice Questions
BONUS 1

Welder Exam Practice Questions

Practise with multiple-choice questions in the style of the trade exam, each answer explained with a drawing, so you know where you stand before exam day.

Last-Week Review Cards: Symbols, Polarity & Defects
BONUS 2

Last-Week Review Cards: Symbols, Polarity & Defects

The facts that are easiest to mix up, on quick cards you can print and review in 10 minutes on your break.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've been welding for years but never wrote the exam?

Yes. It doesn't teach you to weld. It takes the theory the written exam asks about, the part your course manual covers in long paragraphs and YouTube covers in ten different ways, and gives each topic one drawn page, always in the same order, in metric units and with Canadian terms. It's not a beginner book: it starts from what you already do in the shop.

Is it for the Canadian exam, or generic from another country?

Canadian. It follows the Red Seal Occupational Standard for Welder and its exam breakdown, in metric units, with the standards the trade works to here (CSA W59, W47.1, W48, W117.2) and WHMIS 2015. If your province writes its own welder exam, compare the index on this page with the topic list from your apprenticeship office. Standards get updated, so the book tells you which edition each number comes from.

Is this official material? Does it give me a certificate?

No to both. It's an independent illustrated study book, not affiliated with or endorsed by the Red Seal Program, CSA Group or any provincial apprenticeship authority. Your certificate comes only from writing and passing your exam.

Does it replace my technical training?

No. It's a study and review aid. It doesn't replace your apprenticeship, your school hours, shop instruction or your workplace safety rules.

Are the practice questions the ones on the exam?

No. They are written for this book, in the multiple-choice style of the trade exam, each with its answer explained. They are not official exam questions.

When and how do I get it?

As a PDF by email, to the address you enter at checkout.

Do I have to pay every month?

No. It's a one-time payment. No subscription.

Can I have it on paper?

Yes. The PDF is made to print, so you can keep the pages you need in your toolbox or truck.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

CA$ 34.99CA$ 79.99
Get the book · CA$ 34.99

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Steamfitter-Pipefitter Illustrated

Review the steamfitter-pipefitter trade for the Interprovincial exam with one illustrated topic per page: isometrics…

From CA$ 34.99 CA$ 79.99

Millwright Exam Illustrated

An illustrated book for the industrial mechanic (millwright) trade exam in Canada: bearings, couplings, shaft…

From CA$ 34.99 CA$ 79.99

Sheet Metal Worker Exam Illustrated

Review the interprovincial sheet metal worker exam one topic per page: lay out elbows, cones and square-to-rounds in…

From CA$ 34.99 CA$ 79.99

Machinist Exam Illustrated

An illustrated PDF book for the interprovincial machinist exam in Canada: one topic per page, a clear drawing for every…

From CA$ 34.99 CA$ 79.99