Study in Pictures🌐 English (Canada)
Instrumentation & Control Illustrated

Digital book in PDF · read it on your phone or print it

Instrumentation & Control Illustrated

4-20 mA scaling, DP level and wet legs, orifice flow, thermocouples and Pt100, control valves and fail-safe action, PID tuning and hazardous locations. Every topic has its own page: the drawing first, then what you need to remember.

  • 64 illustrated pages
  • English
  • 30-day guarantee
CA$ 34.99CA$ 79.99
Get the book · CA$ 34.99

Price shown for: Canada. In other countries, the checkout shows the price that applies there.

About this book

What it is

4-20 mA scaling, DP level and wet legs, orifice flow, thermocouples and Pt100, control valves and fail-safe action, PID tuning and hazardous locations. Every topic has its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're in your last apprenticeship period
  • Your exam date is set
  • You've worked in the plant for years
What it covers
  1. The Basics Everything Rests On
  2. Signals, Loops and Drawings
  3. Pressure and Level
  4. Flow
  5. Temperature
  6. Control Valves and Final Elements
  7. Control Theory and PID
  8. Safety, Hazardous Locations and Systems
  9. Review and Exam Day
Language
English (Canada)
Pages
64
Format
Digital book in PDF · read it on your phone or print it
Price
CA$ 34.99 (Canada)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

14.4 mA on −50 to 150 °C → 65% → −50 + 130 = 80 °C.
14.4 mA on −50 to 150 °C → 65% → −50 + 130 = 80 °C.
Wet leg drains → reads high. Dry leg fills → reads low.
Wet leg drains → reads high. Dry leg fills → reads low.
Level = tank height − measured distance; radar ignores density.
Level = tank height − measured distance; radar ignores density.
Pt100 = 100.00 Ω at 0 °C · 138.51 Ω at 100 °C · α 0.00385
Pt100 = 100.00 Ω at 0 °C · 138.51 Ω at 100 °C · α 0.00385
ATO = fail closed (fuel to a burner), ATC = fail open (cooling water).
ATO = fail closed (fuel to a burner), ATC = fail open (cooling water).
Derivative = rate of change · good on slow temperature, rarely on flow
Derivative = rate of change · good on slow temperature, rarely on flow
Scaling, ρgh, √ΔP, 100/PB, loop resistance, Pt100, absolute units and Ziegler–Nichols on one sheet
Scaling, ρgh, √ΔP, 100/PB, loop resistance, Pt100, absolute units and Ziegler–Nichols on one sheet
Suppression vs elevation, ATO vs fail open, direct vs reverse, span vs range, flashing vs cavitation, gauge vs absolute
Suppression vs elevation, ATO vs fail open, direct vs reverse, span vs range, flashing vs cavitation, gauge vs absolute

Take a Look at the 9 Parts and 60 Topics

The Basics Everything Rests On

pp. 5-9
  1. How the Interprovincial I&C Exam Is Built
  2. Canadian Units You Must Convert Without Thinking
  3. Range, Span, Zero: Three Words, Three Numbers
  4. Accuracy, Repeatability, Hysteresis, Deadband
  5. Gauge, Absolute and Differential Pressure

Signals, Loops and Drawings

pp. 10-17
  1. Reading Tag Letters on a P&ID
  2. P&ID Lines and Symbols
  3. Why 4-20 mA Has a Live Zero
  4. Scaling in Four Steps: Range → % → mA → Units
  5. Scaling Backwards: From mA to the Process Value
  6. 2-Wire, 3-Wire and 4-Wire Transmitters
  7. The Loop Voltage Budget
  8. HART, Pneumatic 20-100 kPa and Digital Buses

Pressure and Level

pp. 18-25
  1. Pressure Elements: Bourdon, Diaphragm, Bellows
  2. The DP Transmitter and Its 3-Valve Manifold
  3. Hydrostatic Level: ΔP = ρ × g × h
  4. Zero Suppression: Transmitter Below the Tap
  5. Zero Elevation: The Wet Leg
  6. Dry Leg vs Wet Leg: When to Use Each
  7. Bubbler, Displacer and Float
  8. Radar, Ultrasonic and Guided Wave

Flow

pp. 26-32
  1. The Orifice Plate and the Square Root
  2. Square-Root Extraction: Where and Only Once
  3. Orifice Installation: Straight Runs and Taps
  4. Venturi, Flow Nozzle and Pitot
  5. Magnetic Flowmeters
  6. Coriolis, Vortex and Turbine
  7. Volume vs Mass Flow and Gas Compensation

Temperature

pp. 33-38
  1. Thermocouples: Two Metals, One Voltage
  2. Cold Junction Compensation and Extension Wire
  3. RTDs: Pt100 and Its Numbers
  4. 2-Wire, 3-Wire, 4-Wire RTD
  5. Thermowells and Response Time
  6. Testing a Temperature Loop

Control Valves and Final Elements

pp. 39-45
  1. Anatomy of a Globe Control Valve
  2. Air-to-Open, Air-to-Close and Fail-Safe
  3. Direct and Reverse Actuators
  4. The Positioner: When and Why
  5. Valve Characteristics: Quick-Opening, Linear, Equal Percentage
  6. Cv, Cavitation and Flashing
  7. Stroking and Calibrating a Valve

Control Theory and PID

pp. 46-53
  1. The Control Loop: PV, SP, Output, Error
  2. Direct and Reverse Controller Action
  3. Proportional Band and Gain
  4. Integral Action: Removing the Offset
  5. Derivative Action: Reacting to the Rate of Change
  6. On/Off, Cascade, Ratio and Feedforward
  7. Process Lag, Dead Time and Response Curves
  8. Tuning: Ultimate Gain and the Open-Loop Test

Safety, Hazardous Locations and Systems

pp. 54-59
  1. Lockout and Bypass Before Touching a Loop
  2. Hazardous Locations: Zones and Classes
  3. Protection Methods: Ex d, Ex e, Ex i
  4. Intrinsic Safety Barriers and Grounding
  5. Shielding, Grounding and Noise
  6. PLC, DCS and SIS: Who Does What

Review and Exam Day

pp. 60-64
  1. Five-Point Calibration, As-Found and As-Left
  2. Troubleshooting a Loop in the Same Order
  3. The Formulas Page
  4. Pairs That Get Mixed Up
  5. The Last Week Before the Exam

Who This Book Is For

You're in your last apprenticeship period

Each topic from your technical training on one page, so the review after a shift or at camp goes in order instead of in circles.

Your exam date is set

The formulas page, the pairs that get mixed up and the practice questions to check yourself in the last weeks, with every answer pointing back to its page.

You've worked in the plant for years

What you do every day, drawn and named in order, with the scaling, DP level and Pt100 calculations worked out step by step for when you come back to studying as a trade qualifier.

Plus: 2 Free Books

Exam-Style Practice Questions with Explained Answers
BONUS 1

Exam-Style Practice Questions with Explained Answers

Practise multiple-choice questions in the style of the trade exam, each with a short explanation that sends you back to the right page of the book.

The 15 Most Common I&C Mistakes, Before and After
BONUS 2

The 15 Most Common I&C Mistakes, Before and After

See the slips that come up most often on the job and in review, from reversed DP legs to wrong fail-safe action, each drawn wrong and then right.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've worked in instrumentation for years and I'm only now writing the exam?

Yes. It doesn't explain what a gauge is: it puts each topic of the trade in order, one per page, with the calculations worked out step by step. It also works if you're in your last apprenticeship period.

Where does the content come from?

It follows the topics of the Red Seal Occupational Standard for Instrumentation and Control Technician, the basis of the interprovincial exam, with CSA C22.1 for hazardous locations, cited descriptively. Metric units throughout, written in English. Requirements vary by province and territory, so check the details with your apprenticeship authority and the current edition of each code.

Is it official material?

No. It's an independent study book. It isn't published, approved or endorsed by the Red Seal Program, CSA Group or any provincial apprenticeship authority, and it doesn't give you a certificate or count toward your apprenticeship hours.

Does it replace my technical training or apprenticeship?

No. It's a review book to use alongside your training, the current codes and the procedures of your site. What it adds to your textbook and notes: each topic reduced to one drawing and one box of numbers, the scaling, DP level and Pt100 calculations worked out step by step, and a formulas page and a last-week plan for the end.

Are the practice questions the ones on the exam?

No. They're written for this book, in a multiple-choice style, and each answer sends you back to the page that explains it.

When and how does it arrive?

As a PDF by email, to the address you enter at checkout. The 2 bonus books come the same way.

Do I have to pay every month?

No. It's a one-time payment.

Can I have it on paper?

We don't ship printed copies. It's a PDF by email that you can print at home or at a print shop and take with you to camp.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

CA$ 34.99CA$ 79.99
Get the book · CA$ 34.99

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Steamfitter-Pipefitter Illustrated

Review the steamfitter-pipefitter trade for the Interprovincial exam with one illustrated topic per page: isometrics…

From CA$ 34.99 CA$ 79.99

Welder Certification Illustrated

Everything a certified welder needs to know for the Canadian trade exam, one topic per illustrated page: SMAW, GMAW…

From CA$ 34.99 CA$ 79.99

Millwright Exam Illustrated

An illustrated book for the industrial mechanic (millwright) trade exam in Canada: bearings, couplings, shaft…

From CA$ 34.99 CA$ 79.99

Sheet Metal Worker Exam Illustrated

Review the interprovincial sheet metal worker exam one topic per page: lay out elbows, cones and square-to-rounds in…

From CA$ 34.99 CA$ 79.99

Machinist Exam Illustrated

An illustrated PDF book for the interprovincial machinist exam in Canada: one topic per page, a clear drawing for every…

From CA$ 34.99 CA$ 79.99