Study in Pictures🌐 English (Canada)
Machinist Exam Illustrated

Digital book in PDF · read it on your phone or print it

Machinist Exam Illustrated

For the Red Seal interprovincial machinist exam. Blueprints, the vernier and the micrometer, trade math, tapers, threads and fits, milling, heat treatment and CNC programming, worked in metric. Every topic has its own page: the drawing first, then what you need to remember.

  • 77 illustrated pages
  • English
  • 30-day guarantee
CA$ 34.99CA$ 79.99
Get the book · CA$ 34.99

Price shown for: Canada. In other countries, the checkout shows the price that applies there.

About this book

What it is

For the Red Seal interprovincial machinist exam. Blueprints, the vernier and the micrometer, trade math, tapers, threads and fits, milling, heat treatment and CNC programming, worked in metric. Every topic has its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're in your last apprenticeship level
  • Your exam date is booked
  • You've been on the floor for 20 years
What it covers
  1. The Exam and Shop Safety
  2. Reading Drawings
  3. Measurement and Inspection
  4. Trade Math
  5. The Lathe
  6. Threads and Fits
  7. Milling, Drilling and Grinding
  8. Materials and Heat Treatment
  9. CNC Programming
  10. Final Review
Language
English (Canada)
Pages
77
Format
Digital book in PDF · read it on your phone or print it
Price
CA$ 34.99 (Canada)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

135 questions · 8 work activities (A–H) · 70% pass mark · 4 hours
135 questions · 8 work activities (A–H) · 70% pass mark · 4 hours
Material, scale, units, general tolerance, projection and revision: read them first.
Material, scale, units, general tolerance, projection and revision: read them first.
Sine bar: 100 mm × sin 30° = 50.000 mm stack
Sine bar: 100 mm × sin 30° = 50.000 mm stack
n = 1000 × Vc ÷ (π × D): 30 m/min on Ø50 ≈ 191 rpm.
n = 1000 × Vc ÷ (π × D): 30 m/min on Ø50 ≈ 191 rpm.
(30 − 20) ÷ (2 × 50) = 0.1 → set the compound to 5.71°
(30 − 20) ÷ (2 × 50) = 0.1 → set the compound to 5.71°
M10 × 1.5 → 8.5 mm drill · M8 × 1.25 → 6.8 mm drill
M10 × 1.5 → 8.5 mm drill · M8 × 1.25 → 6.8 mm drill
Knee mill axes X, Y, Z and quill, plus tramming: equal readings front–back and left–right.
Knee mill axes X, Y, Z and quill, plus tramming: equal readings front–back and left–right.
SAE 1045 ≈ 0.45% carbon: the last two digits are the carbon content
SAE 1045 ≈ 0.45% carbon: the last two digits are the carbon content

Take a Look at the 10 Parts and 72 Topics

The Exam and Shop Safety

pp. 6-11
  1. How the Machinist Exam Is Built
  2. How to Use This Book in 6 Weeks
  3. Lockout Before You Touch the Machine
  4. WHMIS 2015 Labels on Cutting Fluids
  5. Chips, Guards and PPE at the Lathe
  6. Lifting and Rigging Heavy Workpieces

Reading Drawings

pp. 12-19
  1. Third-Angle vs First-Angle Projection
  2. Line Types That Tell You What You See
  3. Section and Auxiliary Views
  4. Dimensions and Tolerances: Limits, Plus/Minus, Unilateral
  5. The Title Block and General Notes
  6. GD&T: The Feature Control Frame
  7. GD&T: Form and Orientation Symbols
  8. GD&T: Position, Runout and MMC

Measurement and Inspection

pp. 20-27
  1. Reading a Metric Vernier Caliper
  2. Reading a Metric Micrometer in 3 Steps
  3. Inch Micrometer, Because Shops Still Use It
  4. Dial Indicators and Test Indicators
  5. Gauge Blocks: Building a Stack
  6. The Sine Bar
  7. Gauges: Plug, Ring, Thread and Go/No-Go
  8. Surface Finish: Ra in Micrometres

Trade Math

pp. 28-36
  1. Converting mm and Inches Without Errors
  2. Right-Triangle Trig: SOH CAH TOA at the Bench
  3. Bolt-Hole Circle Coordinates
  4. Taper Basics: Taper per Length and Angle
  5. Tailstock Offset for Long Tapers
  6. Measuring Dovetails and Vee Grooves with Rolls
  7. Cutting Speed to RPM
  8. Feed Rate on the Mill: fz × z × n
  9. Weight of a Part from Its Volume

The Lathe

pp. 37-44
  1. Lathe Parts and What Each One Moves
  2. Workholding: 3-Jaw, 4-Jaw, Collet, Between Centres
  3. Tool Geometry on a Turning Tool
  4. Carbide Inserts: Reading the Code
  5. Facing, Turning and Centre Drilling
  6. Turning a Taper with the Compound
  7. Knurling, Grooving and Parting Off
  8. Boring and Reaming on the Lathe

Threads and Fits

pp. 45-51
  1. Thread Anatomy: Major, Minor, Pitch Diameter
  2. Metric Thread Designation: M10 × 1.5 – 6g
  3. Tap Drill Size: Major Minus Pitch
  4. Thread Depth and Infeed on the Compound
  5. Unified Threads and Classes 1A-3A / 1B-3B
  6. Measuring Threads: Three-Wire and Thread Mic
  7. Hole-Basis Fits: H7/g6, H7/k6, H7/p6

Milling, Drilling and Grinding

pp. 52-59
  1. Vertical Mill Axes and Tramming the Head
  2. Squaring a Block in 6 Sides
  3. Climb vs Conventional Milling
  4. End Mills, Face Mills and Slot Drills
  5. Indexing with a Dividing Head
  6. Drilling: Point Angle, Speeds and Countersinks
  7. Surface Grinding and Wheel Markings
  8. Bandsaw and Cutting Off Stock

Materials and Heat Treatment

pp. 60-64
  1. Steel Families and Their Numbers
  2. Hardening, Quenching and Tempering
  3. Annealing vs Normalizing vs Stress Relief
  4. Hardness Testing: Rockwell C and B
  5. Machining Aluminium, Brass and Plastics

CNC Programming

pp. 65-73
  1. CNC Axes on the Lathe and the Mill
  2. Work Offset vs Tool Offset, Side by Side
  3. Absolute G90 vs Incremental G91
  4. G00, G01, G02, G03: Moving the Tool
  5. Cutter Compensation G41 and G42
  6. M-Codes You Must Know
  7. Constant Surface Speed on the Lathe: G96 and G50
  8. Reading a Short Program Line by Line
  9. Proving a Program Safely

Final Review

pp. 74-77
  1. Formulas on One Page
  2. The Most Common Calculation Mistakes
  3. How to Read a Multiple-Choice Question
  4. Last-Week Checklist

Who This Book Is For

You're in your last apprenticeship level

Every topic from school, back in the same order, with the trade math worked out step by step in metric.

Your exam date is booked

You review one page per topic, find your weak spots with the practice questions and go over the formulas page the week before.

You've been on the floor for 20 years

What you already do at the lathe and the mill, explained for the exam: the why behind it, without starting from what a lathe is.

Plus: 2 Free Books

Machinist Exam-Style Practice Questions
BONUS 1

Machinist Exam-Style Practice Questions

Multiple-choice questions in the style of the trade exam, grouped by topic, with every answer explained, so you can find your weak spots before exam day.

15 Shop Mistakes: Before & After
BONUS 2

15 Shop Mistakes: Before & After

The most common machining mistakes drawn side by side with the right way to do it, a quick review to read the night before.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've run a lathe for years but never written the exam?

Yes. It doesn't explain what a lathe is: it puts what you already do in order for the exam, with the why, the formulas and worked examples in metric.

Where does the content come from?

From the Red Seal Occupational Standard for Machinist, the standard behind the interprovincial machinist exam, plus the public exam information, ISO 286 / ISO 68-1 and WHMIS 2015. The worked examples are in metric, with inch conversions and Unified threads where the exam uses them. Speeds and feeds always refer to the tool manufacturer's data.

Is this official material?

No. It's an independent study book. It isn't issued, approved or endorsed by Red Seal, any provincial authority or CSA, and it doesn't give a certificate or count toward your hours: your ticket comes from your provincial apprenticeship authority once you meet its requirements, including the exam.

Does it replace my apprenticeship training or technical school?

No. It's a review book to study alongside your training and your hours on the floor.

Are the practice questions the real exam questions?

No. They're written for this book, in the style of a multiple-choice trade exam, so you can check what you know topic by topic.

When and how do I get it?

As a PDF by email, to the address you enter at checkout. The 2 bonus books come the same way.

Does it work in my province?

It follows the Red Seal Occupational Standard for Machinist, the base of the interprovincial exam. Check with your provincial apprenticeship authority how and when you write it. And it's a one-time payment, no subscription.

Can I have it on paper?

It's a PDF, not a printed book: nothing is shipped. It's made to print at home or at a print shop, so you can take the pages you need to the shop.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

CA$ 34.99CA$ 79.99
Get the book · CA$ 34.99

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Steamfitter-Pipefitter Illustrated

Review the steamfitter-pipefitter trade for the Interprovincial exam with one illustrated topic per page: isometrics…

From CA$ 34.99 CA$ 79.99

Welder Certification Illustrated

Everything a certified welder needs to know for the Canadian trade exam, one topic per illustrated page: SMAW, GMAW…

From CA$ 34.99 CA$ 79.99

Millwright Exam Illustrated

An illustrated book for the industrial mechanic (millwright) trade exam in Canada: bearings, couplings, shaft…

From CA$ 34.99 CA$ 79.99

Sheet Metal Worker Exam Illustrated

Review the interprovincial sheet metal worker exam one topic per page: lay out elbows, cones and square-to-rounds in…

From CA$ 34.99 CA$ 79.99