Study in Pictures🌐 English (Canada)
Sheet Metal Worker Exam Illustrated

Digital book in PDF · read it on your phone or print it

Sheet Metal Worker Exam Illustrated

For the Red Seal Sheet Metal Worker exam, written for Canada: metric, with imperial where the shop still uses it. Gore angles, stretchouts, square-to-rounds, the Pittsburgh lock, the fan laws, dampers, hangers and flashing, each on its own page: the drawing first, then what you need to remember.

  • 66 illustrated pages
  • English
  • 30-day guarantee
CA$ 34.99CA$ 79.99
Get the book · CA$ 34.99

Price shown for: Canada. In other countries, the checkout shows the price that applies there.

About this book

What it is

For the Red Seal Sheet Metal Worker exam, written for Canada: metric, with imperial where the shop still uses it. Gore angles, stretchouts, square-to-rounds, the Pittsburgh lock, the fan laws, dampers, hangers and flashing, each on its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're in your last apprenticeship level
  • Your exam date is set
  • You've been in the trade for years
What it covers
  1. The Exam and the Basics
  2. Trade Math
  3. Parallel Line Development
  4. Radial Line Development
  5. Triangulation
  6. Seams, Joints and Fabrication
  7. Air Flow and Duct Systems
  8. Architectural Work, Drawings and Safety
  9. Final Review
Language
English (Canada)
Pages
66
Format
Digital book in PDF · read it on your phone or print it
Price
CA$ 34.99 (Canada)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

Equivalent round of 400 × 300 mm ≈ 378 mm (equal area would be 391 mm).
Equivalent round of 400 × 300 mm ≈ 378 mm (equal area would be 391 mm).
Gore = angle ÷ (pieces − 1): 90° in 5 pieces = 3 × 22½° + 2 × 11¼°.
Gore = angle ÷ (pieces − 1): 90° in 5 pieces = 3 × 22½° + 2 × 11¼°.
Why an offset square-to-round needs a true length diagram for each quarter.
Why an offset square-to-round needs a true length diagram for each quarter.
Grease duct: 16 MSG steel or 18 MSG stainless, continuous liquid-tight welds, leak-tested.
Grease duct: 16 MSG steel or 18 MSG stainless, continuous liquid-tight welds, leak-tested.
+10% rpm → +10% flow, +21% pressure, +33% power
+10% rpm → +10% flow, +21% pressure, +33% power
K-style gutter: slope to the outlet, expansion joint on long runs, 11.5 mm of movement per 10 m.
K-style gutter: slope to the outlet, expansion joint on long runs, 11.5 mm of movement per 10 m.
Parallel line in 5 steps, radial line in 4, triangulation in 4 — side by side.
Parallel line in 5 steps, radial line in 4, triangulation in 4 — side by side.
Stretchout, areas, De, Pythagoras, gores, arc angle, Q = A × V, VP and fan laws on one sheet.
Stretchout, areas, De, Pythagoras, gores, arc angle, Q = A × V, VP and fan laws on one sheet.

Take a Look at the 9 Parts and 62 Topics

The Exam and the Basics

pp. 5-9
  1. How the Red Seal exam is built
  2. Reading a question the way the exam writes it
  3. Metric and imperial on the same bench
  4. Gauge vs. thickness
  5. Sheet metals and their coatings

Trade Math

pp. 10-17
  1. Circumference and stretchout
  2. Areas of rectangles and circles
  3. Equivalent round diameter
  4. Pythagoras for offsets
  5. The 45° offset multiplier
  6. Slope, pitch and percent grade
  7. Weight of sheet and duct
  8. Gore angles for round elbows

Parallel Line Development

pp. 18-24
  1. The three methods, side by side
  2. Parallel line in 5 numbered steps
  3. Two-piece 90° round elbow
  4. Five-piece round elbow
  5. Round pipe cut at an angle
  6. Tee: round branch on round main
  7. Rectangular mitred elbow

Radial Line Development

pp. 25-29
  1. Radial line in 4 numbered steps
  2. Full cone and its arc angle
  3. Frustum: concentric reducer
  4. Cone cut by an inclined plane
  5. Square pyramid hood

Triangulation

pp. 30-36
  1. True length: the core idea
  2. The true length diagram
  3. Square-to-round, centred
  4. Square-to-round, offset
  5. Rectangular-to-rectangular transition
  6. Rectangular-to-round with a different shape ratio
  7. Y-branch (breeches)

Seams, Joints and Fabrication

pp. 37-45
  1. Seam allowances in one table
  2. Grooved seam in cross-section
  3. Pittsburgh lock
  4. Snap lock and button punch
  5. Transverse joints: drive slip and S-slip
  6. Flanged connectors and corners
  7. Edges: hems and wired edges
  8. Fasteners and joining
  9. Duct sealing classes

Air Flow and Duct Systems

pp. 46-56
  1. Air flow: Q = A × V
  2. Static, velocity and total pressure
  3. Pressure classes for duct construction
  4. The fan laws
  5. Duct sizing by equal friction
  6. Fittings and turning vanes
  7. Balancing and volume dampers
  8. Fire dampers and their installation
  9. Hangers and supports
  10. Insulation, liner and vapour barrier
  11. Kitchen exhaust grease duct

Architectural Work, Drawings and Safety

pp. 57-61
  1. Flashing and counterflashing
  2. Gutters and downspouts
  3. Standing seam and roof panels
  4. Reading shop and mechanical drawings
  5. Safety on the job

Final Review

pp. 62-66
  1. Pattern steps on one page
  2. Formula sheet
  3. Most common mistakes, drawn
  4. Question types that come up most
  5. Last two weeks before the exam

Who This Book Is For

You're in your last apprenticeship level

Every block of school gets its page: the pattern in numbered steps and the math as a worked example in metric, so you study it in the same order you'll be asked.

Your exam date is set

The final review puts the pattern steps, the formula sheet and the most common mistakes on a few pages, so you can go over everything in the last two weeks.

You've been in the trade for years

You already know the work. The book shows it the way the exam words it, from gauge vs. thickness to the fan laws, with nothing aimed at beginners.

Plus: 2 Free Books

Sheet Metal Exam-Style Practice Questions
BONUS 1

Sheet Metal Exam-Style Practice Questions

Practise with multiple-choice questions written like the exam, each with the answer and the page to go back to.

The 15 Most Common Sheet Metal Mistakes
BONUS 2

The 15 Most Common Sheet Metal Mistakes

See each frequent mistake next to the correct version, drawn before and after, so you catch it on the bench and on the exam.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've been in the trade for years and I'm challenging the exam?

Yes. It isn't a beginner's book: it follows the topics of the exam in order, so you can match what you do on the job with the way the questions are written.

Where does the content come from?

It's checked against the Red Seal Occupational Standard for Sheet Metal Worker and the current exam breakdown, the National Building Code of Canada, the applicable CSA and ULC standards and the duct construction standards used on Canadian specs. It's written for Canada, not a US book: the interprovincial exam is the same across the participating provinces and territories, so it works wherever you write it. Metric units, with imperial where the trade still uses it.

Is it official material?

No. It's an independent study book. It isn't affiliated with or endorsed by the Red Seal Program or any provincial or territorial apprenticeship authority, and it doesn't give you a certificate: your certification is issued by your provincial or territorial apprenticeship authority.

Does it replace my apprenticeship training or technical school?

No. It's a review book to go with your training, your time on the job and the codes that apply to your work. It doesn't repeat your school manual: it takes the same topics and gives each one its own page, drawn, with the steps in order.

Are the practice questions the ones on the exam?

No. They're written for this book, in the style of the exam, each with the answer and the page to go back to.

How do I get it?

The book and the 2 bonus books come as a PDF to the email you enter at checkout. You can read it on your phone or print the pages you want for the shop.

Do I have to pay every month?

No. It's a one-time payment.

Can I have it on paper?

Yes. The PDF is printable, so you can print the whole book or just the pages you want in the shop.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

CA$ 34.99CA$ 79.99
Get the book · CA$ 34.99

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Steamfitter-Pipefitter Illustrated

Review the steamfitter-pipefitter trade for the Interprovincial exam with one illustrated topic per page: isometrics…

From CA$ 34.99 CA$ 79.99

Welder Certification Illustrated

Everything a certified welder needs to know for the Canadian trade exam, one topic per illustrated page: SMAW, GMAW…

From CA$ 34.99 CA$ 79.99

Millwright Exam Illustrated

An illustrated book for the industrial mechanic (millwright) trade exam in Canada: bearings, couplings, shaft…

From CA$ 34.99 CA$ 79.99

Machinist Exam Illustrated

An illustrated PDF book for the interprovincial machinist exam in Canada: one topic per page, a clear drawing for every…

From CA$ 34.99 CA$ 79.99