Study in Pictures🌐 English (United States)
Wood Stove Installer Illustrated

Digital book in PDF · read it on your phone or print it

Wood Stove Installer Illustrated

Draft, chimney types, connectors, clearances to combustibles, hearth pad R-values, inserts, inspection levels and creosote. One topic per page: the drawing first, then the numbers, so you review the install in the same order you build it.

  • 68 illustrated pages
  • English
  • 30-day guarantee
US$ 27US$ 63
Get the book · US$ 27

Price shown for: United States. In other countries, the checkout shows the price that applies there.

About this book

What it is

Draft, chimney types, connectors, clearances to combustibles, hearth pad R-values, inserts, inspection levels and creosote. One topic per page: the drawing first, then the numbers, so you review the install in the same order you build it.

Who This Book Is For
  • You're studying for the NFI Woodburning exam
  • Your exam date is close
  • You already sell or install stoves
What it covers
  1. How Wood Burns
  2. Draft
  3. Chimneys
  4. Chimney Connectors
  5. Clearances to Combustibles
  6. Floor Protection and R-Values
  7. Inserts, Fireplaces and Special Cases
  8. Inspection, Maintenance and Safety
  9. Review: The Install Sequence
Language
English (United States)
Pages
68
Format
Digital book in PDF · read it on your phone or print it
Price
US$ 27 (United States)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

Fuel, oxygen and heat in one stove cutaway: remove one side, the fire goes out.
Fuel, oxygen and heat in one stove cutaway: remove one side, the fire goes out.
Inside chimney stays warm and drafts; outside chimney stalls and collects creosote.
Inside chimney stays warm and drafts; outside chimney stalls and collects creosote.
Masonry, UL 103HT or UL 1777 liner: the only three ways to vent a wood stove
Masonry, UL 103HT or UL 1777 liner: the only three ways to vent a wood stove
Connector = flue collar to chimney, same room only; never through a ceiling, attic or closet (IRC M1803.3, NFPA 211).
Connector = flue collar to chimney, same room only; never through a ceiling, attic or closet (IRC M1803.3, NFPA 211).
Drywall over wood studs = combustible wall, even with tile on it.
Drywall over wood studs = combustible wall, even with tile on it.
Ember protection catches sparks; thermal protection has an R-value. The label tells you which one.
Ember protection catches sparks; thermal protection has an R-value. The label tells you which one.
Insert = listed appliance: Level 2 inspection first, then connect per the listing.
Insert = listed appliance: Level 2 inspection first, then connect per the listing.
Level 1 yearly · Level 2 after a sale, new appliance, relining or chimney fire · Level 3 opens concealed areas
Level 1 yearly · Level 2 after a sale, new appliance, relining or chimney fire · Level 3 opens concealed areas

Take a Look at the 9 Parts and 64 Topics

How Wood Burns

pp. 5-12
  1. The Fire Triangle in a Firebox
  2. The Three Stages of Burning Wood
  3. Why Dry Wood Is Not Optional
  4. Primary and Secondary Air
  5. Catalytic vs. Non-Catalytic Stoves
  6. EPA Certification and the 2020 Limit
  7. How Heat Moves: Conduction, Convection, Radiation
  8. Pyrolysis of Combustibles: Why Distance Matters

Draft

pp. 13-19
  1. Stack Effect: Hot Gas Rises
  2. Measuring Draft in Inches of Water Column
  3. The House Is Part of the Chimney
  4. Negative Pressure and Backdrafting
  5. Chimney Height and Draft
  6. Inside vs. Outside Chimneys
  7. Fixing Poor Draft in the Same Order

Chimneys

pp. 20-28
  1. Chimney Types at a Glance
  2. Masonry Chimney Anatomy
  3. Masonry Chimney Clearances
  4. Factory-Built Chimney (UL 103HT)
  5. Factory-Built Chimney Components
  6. The 3-2-10 Rule
  7. Sizing the Flue
  8. Caps and Spark Arrestors
  9. Relining with a UL 1777 Liner

Chimney Connectors

pp. 29-35
  1. Connector vs. Chimney
  2. Single-Wall vs. Double-Wall Connectors
  3. Joints: Crimp Down, Three Screws
  4. Slope and Horizontal Run
  5. Elbows and Draft Loss
  6. Through a Combustible Wall
  7. Connecting to a Masonry Thimble

Clearances to Combustibles

pp. 36-43
  1. What Counts as Combustible
  2. Listed vs. Unlisted: Who Sets the Number
  3. Reading the Listing Label
  4. Where to Measure From and To
  5. Corner Installations
  6. Reducing Clearances with a Shield
  7. Clearance Reduction Math in Four Steps
  8. Alcoves, Mantels and Tight Rooms

Floor Protection and R-Values

pp. 44-50
  1. Ember Protection vs. Thermal Protection
  2. How Big the Hearth Pad Must Be
  3. k, C and R: Three Ways to Say the Same Thing
  4. Hearth Pad R-Value Math in Four Steps
  5. Brick and Tile Are Not Insulators
  6. Building a Hearth Pad Layer by Layer
  7. Listed Prefab Hearth Pads

Inserts, Fireplaces and Special Cases

pp. 51-58
  1. Fireplace Insert Basics
  2. Direct Connect vs. Full Liner
  3. Mantels, Trim and Hearth Extensions
  4. Factory-Built Fireplaces (UL 127)
  5. Stoves into an Existing Masonry Chimney
  6. Manufactured and Mobile Homes
  7. Outside Air and Tight Houses
  8. Permits, Codes and the AHJ

Inspection, Maintenance and Safety

pp. 59-63
  1. NFPA 211 Inspection Levels 1, 2 and 3
  2. Creosote: The Three Stages
  3. Chimney Fires: Signs and Response
  4. Smoke and CO Alarms
  5. Handing Over the Install

Review: The Install Sequence

pp. 64-68
  1. The Install in 10 Steps
  2. Clearance and R-Value Formulas on One Page
  3. Numbers to Have at Hand
  4. Mistakes That Fail Inspection
  5. Pre-Fire Checklist for the Job Site

Who This Book Is For

You're studying for the NFI Woodburning exam

Each Core and Wood topic sits on its own page, so you can study at night in short sessions and look at the drawing instead of rereading the standard.

Your exam date is close

Part IX puts the formulas, the numbers to have at hand and the install sequence on a few pages you can review the night before.

You already sell or install stoves

Print the pages you use most and keep them in the truck: clearances, hearth pads and connectors, drawn and ready when the customer or the inspector asks.

Plus: 2 Free Books

Woodburning Practice Questions: Exam-Style with Answers Explained
BONUS 1

Woodburning Practice Questions: Exam-Style with Answers Explained

Test yourself on Core and Wood topics in the exam format, and see why each answer is right, so draft, venting and clearance questions don't catch you off guard.

The 15 Most Common Install Mistakes: Before & After
BONUS 2

The 15 Most Common Install Mistakes: Before & After

Each common mistake (wrong connector clearance, a missing thimble, an undersized hearth pad) is drawn next to the correct install, so you spot it on the job before the inspector does.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is this for me if I already sell or install wood stoves?

Yes. It's not a beginner's book. It doesn't replace your study manual or the manufacturer's manual: it puts what's spread across them on one page per topic, in the order you work, with the clearance, R-value and 3-2-10 math drawn step by step. You review what you know and fill the gaps the exam asks about.

Where does the content come from?

It's checked against NFPA 211 (2024 edition), IRC Chapter 10, the UL listing standards (UL 1482, UL 103HT, UL 127, UL 1777), EPA 40 CFR Part 60 Subpart AAA and HUD 24 CFR 3280. If your jurisdiction uses an older edition, the appliance's listing label and your local code always come first.

Is this official material?

No. It's an independent study guide, not affiliated with or endorsed by NFI, HPBA, NFPA or the EPA. It doesn't give you a certificate: NFI certification comes only from passing the NFI exam. This book helps you study for it.

Does it replace a course or hands-on training?

No. It's a study and review companion. It doesn't replace training, the manufacturer's instructions or your local inspector.

Are the practice questions the ones on the exam?

No. They're written for this book in an exam style, so you can check what you know. They're not official NFI questions.

How do I get it?

The book and the 2 bonuses come as PDFs by email, to the address you enter at checkout.

Do I have to pay every month?

No. It's a one-time payment.

Can I have it on paper?

Yes. The PDF is made to print, so you can print the whole book or just the pages you want in the truck.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

US$ 27US$ 63
Get the book · US$ 27

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Chimney Sweep Illustrated

Every part of a masonry and factory-built chimney, the 3 inspection levels, creosote stages, clearances to combustibles…

From US$ 27 US$ 63

Stationary Engineer Illustrated

Boiler room and building plant operation in drawings, one topic per page: fire-tube and water-tube boilers, safety…

From US$ 27 US$ 63

Gas Hearth Specialist Illustrated

Gas fireplaces, inserts, log sets and stoves explained one topic per page, each with a clear drawing: venting and…

From US$ 27 US$ 63

Propane Technician Illustrated

Propane Technician Illustrated explains LP-gas systems one topic per page, each with a big, clear drawing: propane…

From US$ 27 US$ 63

Boiler Operator Illustrated

An illustrated study book for boiler operators: one topic per page, every concept drawn. Follow the boiler as one path…

From US$ 27 US$ 63

Oil Burner Technician Illustrated

Residential oil heating explained one topic per page, every part drawn: tank, fuel lines, burner, nozzle, primary…

From US$ 27 US$ 63

Fuel Gas Inspector Illustrated

Fuel gas piping, pipe sizing, appliances, combustion air and venting drawn one topic per page, checked against the…

From US$ 27 US$ 63