Study in Pictures🌐 English (United States)
Boiler Operator Illustrated

Digital book in PDF · read it on your phone or print it

Boiler Operator Illustrated

For U.S. boiler operator license exams, low and high pressure. The gauge glass, safety valves, the low-water cutoff test, combustion, bottom blowdown and BTU math: one topic per page, the drawing first, then what you need to remember. PDF by email, ready to print.

  • 71 illustrated pages
  • English
  • 30-day guarantee
US$ 27US$ 63
Get the book · US$ 27

Price shown for: United States. In other countries, the checkout shows the price that applies there.

About this book

What it is

For U.S. boiler operator license exams, low and high pressure. The gauge glass, safety valves, the low-water cutoff test, combustion, bottom blowdown and BTU math: one topic per page, the drawing first, then what you need to remember. PDF by email, ready to print.

Who This Book Is For
  • You're studying for your license
  • Your exam date is close
  • You already run the boiler room
What it covers
  1. The Boiler as One Path
  2. Boiler Types
  3. Trim and Controls
  4. Safety Valves and Low-Water Cutoff
  5. Combustion and Burners
  6. Water, Steam and Blowdown
  7. Calculations, Worked Step by Step
  8. Operation, Emergencies and Review
Language
English (United States)
Pages
71
Format
Digital book in PDF · read it on your phone or print it
Price
US$ 27 (United States)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

Fuel + air → flame → metal → water → steam → condensate: the boiler as one loop
Fuel + air → flame → metal → water → steam → condensate: the boiler as one loop
Firetube boiler: gases inside the tubes, water outside, large water volume and steady pressure.
Firetube boiler: gases inside the tubes, water outside, large water volume and steady pressure.
Example: main scale 10 psi, differential 3 psi → burner off at 10, on at 7.
Example: main scale 10 psi, differential 3 psi → burner off at 10, on at 7.
Section IV steam: set at 15 psi max, blowdown 2-4 psi, no more than 5 psi over MAWP
Section IV steam: set at 15 psi max, blowdown 2-4 psi, no more than 5 psi over MAWP
Complete combustion makes CO2 + H2O; incomplete makes CO and soot.
Complete combustion makes CO2 + H2O; incomplete makes CO and soot.
Steam out, condensate back, makeup fills the gap: the boiler water loop on one page.
Steam out, condensate back, makeup fills the gap: the boiler water loop on one page.
500 gallons from 60 °F to 180 °F = about 500,000 Btu, worked line by line
500 gallons from 60 °F to 180 °F = about 500,000 Btu, worked line by line
Water level → vents → valves → prepurge → low fire → warm-up → vents closed → main stop open slowly.
Water level → vents → valves → prepurge → low fire → warm-up → vents closed → main stop open slowly.

Take a Look at the 8 Parts and 67 Topics

The Boiler as One Path

pp. 5-11
  1. Fuel + Air → Flame → Water → Steam → Condensate
  2. Low Pressure vs High Pressure: Where the Line Is
  3. psig, psia and Inches of Mercury
  4. Heat That Raises Temperature vs Heat That Makes Steam
  5. Pressure Raises the Boiling Point
  6. Saturated, Wet and Superheated Steam
  7. Heating Surface and Where Heat Transfers

Boiler Types

pp. 12-19
  1. Firetube: Fire Inside, Water Outside
  2. Scotch Marine and the Pass Count
  3. HRT, Firebox and Vertical Firetube
  4. Watertube: Water Inside, Fire Outside
  5. D, A and O Type Watertube Boilers
  6. Cast Iron Sectional Boilers
  7. Hot Water Boilers and the Closed Loop
  8. Nameplate and Code Stamps

Trim and Controls

pp. 20-28
  1. The Water Column, Gauge Glass and Try Cocks
  2. Blowing Down the Gauge Glass in Order
  3. The Pressure Gauge and Its Siphon
  4. Pressuretrol: Operating Limit, Cut-In and Differential
  5. High Limit with Manual Reset
  6. Hot Water Controls: Aquastat and the Tridicator
  7. Feedwater Line: Valves in the Right Order
  8. Main Steam Stop Valve and Non-Return Valve
  9. Flame Safeguard and Scanners

Safety Valves and Low-Water Cutoff

pp. 29-37
  1. Why the Safety Valve Is the Last Line
  2. Safety Valve vs Relief Valve vs Safety-Relief
  3. Capacity: How Much the Valve Must Dump
  4. Installation Rules for the Safety Valve
  5. Testing the Safety Valve: Try Lever and Pop Test
  6. Low-Water Cutoff: Float Type vs Probe Type
  7. The Low-Water Cutoff Test, Step by Step
  8. Slow-Drain (Evaporation) Test
  9. Auxiliary Cutoff and Pump Control

Combustion and Burners

pp. 38-45
  1. The Combustion Triangle and the Three Ts
  2. Excess Air: Too Little vs Too Much
  3. Reading a Flue Gas Analysis
  4. Natural Gas Train in Order
  5. Fuel Oil: No. 2 vs No. 6
  6. The Firing Sequence: Prepurge to Main Flame
  7. Draft: Natural, Forced, Induced, Balanced
  8. Flame Failure and Lockout

Water, Steam and Blowdown

pp. 46-53
  1. Feedwater, Condensate and Makeup
  2. Condensate Tank, Feed Pumps and the Deaerator
  3. Steam Traps: Four Types
  4. Scale, Corrosion and Carryover
  5. Water Treatment: What You Test and Why
  6. Surface Blowdown vs Bottom Blowdown
  7. Bottom Blowdown in the Right Order
  8. Priming, Foaming and Water Hammer

Calculations, Worked Step by Step

pp. 54-62
  1. BTU to Heat Water
  2. Boiler Horsepower
  3. Reading the Steam Table
  4. Pressure from a Column of Water
  5. Total Force on a Surface
  6. Firing Rate and Fuel Use
  7. Combustion Efficiency and Stack Loss
  8. Blowdown Rate
  9. Safety Valve Capacity Check

Operation, Emergencies and Review

pp. 63-71
  1. Cold Start-Up in Order
  2. Shutdown and Cut-In on a Header
  3. Emergency: Low Water
  4. Emergency: Overpressure, Tube Leak, Flame Failure
  5. Daily, Weekly, Monthly, Annual Checks
  6. The Boiler Log and the Inspector's Visit
  7. Lay-Up: Wet vs Dry
  8. Hydrostatic Test and Internal Inspection Prep
  9. The Most Common Mistakes on the Exam

Who This Book Is For

You're studying for your license

You follow the boiler as one loop, then every fitting and every test on its own page, so the guide finally fits together.

Your exam date is close

You review the numbers, the test sequences and the worked BTU and horsepower problems in the same order, page by page.

You already run the boiler room

You print the pages you need and keep the low-water cutoff test, blowdown and start-up at hand for the next inspection.

Plus: 2 Free Books

Boiler Operator Practice Questions: Exam-Style Questions with Answers Explained
BONUS 1

Boiler Operator Practice Questions: Exam-Style Questions with Answers Explained

Practice the way the exam asks: multiple-choice questions on trim, safety valves, combustion and calculations, each answer explained with a page reference.

Boiler Room Quick Cards: The Numbers, Tests and Mistakes to Keep at Hand
BONUS 2

Boiler Room Quick Cards: The Numbers, Tests and Mistakes to Keep at Hand

Review in five minutes before a shift or the exam: the key numbers, the daily test sequences and the most common mistakes, one printable card each.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've run boilers for years but never taken the written exam?

Yes. It explains what you already do with your hands, one drawing per topic, and adds what the written exam asks about: low pressure (Section IV) and high pressure (Section I), watertube D, A and O types, the deaerator, No. 6 oil, the steam table, and BTU, boiler horsepower and safety valve capacity worked step by step.

Does it work for my exam: New Jersey Black Seal, NYC, Chicago or another state?

It's built on ASME Sections I, IV and VI, ASME CSD-1, NFPA 85 and the National Board Inspection Code. Code editions change and every state or city sets its own license rules, so check each limit against the current edition and your licensing board (New Jersey, NYC, Chicago or your state).

Is this official material?

No. It's an independent illustrated study book. It isn't issued or endorsed by ASME, NFPA, the National Board or any licensing board.

Does it replace a course or training?

No. It's study and review material. It doesn't give you a license, a certificate or training hours, and it doesn't replace hands-on training, the manufacturer's manual or the rules of your jurisdiction.

Are the practice questions the ones on the exam?

No. They're written for this book in the style of the exam, and each answer is explained with a page reference.

When and how do I get it?

As a PDF by email, sent to the address you enter at checkout. The two bonus books come the same way.

Do I have to pay every month?

No. It's a one-time payment, with no subscription.

Can I have it on paper?

Yes. The PDF is ready to print, so you can keep the pages you need in the boiler room.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

US$ 27US$ 63
Get the book · US$ 27

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Chimney Sweep Illustrated

Every part of a masonry and factory-built chimney, the 3 inspection levels, creosote stages, clearances to combustibles…

From US$ 27 US$ 63

Stationary Engineer Illustrated

Boiler room and building plant operation in drawings, one topic per page: fire-tube and water-tube boilers, safety…

From US$ 27 US$ 63

Gas Hearth Specialist Illustrated

Gas fireplaces, inserts, log sets and stoves explained one topic per page, each with a clear drawing: venting and…

From US$ 27 US$ 63

Propane Technician Illustrated

Propane Technician Illustrated explains LP-gas systems one topic per page, each with a big, clear drawing: propane…

From US$ 27 US$ 63

Oil Burner Technician Illustrated

Residential oil heating explained one topic per page, every part drawn: tank, fuel lines, burner, nozzle, primary…

From US$ 27 US$ 63

Wood Stove Installer Illustrated

Wood stove, fireplace insert and chimney installation explained one topic per page, with every concept drawn: draft…

From US$ 27 US$ 63

Fuel Gas Inspector Illustrated

Fuel gas piping, pipe sizing, appliances, combustion air and venting drawn one topic per page, checked against the…

From US$ 27 US$ 63