Study in Pictures🌐 English (United States)
Fuel Gas Inspector Illustrated

Digital book in PDF · read it on your phone or print it

Fuel Gas Inspector Illustrated

Gas piping, pipe sizing, pressure testing, shutoff valves, combustion air, venting, appliance location and the red tag. Every topic gets its own page: the drawing first, then what you need to remember.

  • 69 illustrated pages
  • English
  • 30-day guarantee
US$ 27US$ 63
Get the book · US$ 27

Price shown for: United States. In other countries, the checkout shows the price that applies there.

About this book

What it is

Gas piping, pipe sizing, pressure testing, shutoff valves, combustion air, venting, appliance location and the red tag. Every topic gets its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're studying the IFGC at night
  • Your FG exam date is close
  • You already work as an inspector
What it covers
  1. The Exam and the Code Book
  2. General Regulations and Appliance Location
  3. Gas Piping: Materials and Installation
  4. Gas Pipe Sizing
  5. Testing, Purging, Valves and Regulators
  6. Combustion Air
  7. Venting
  8. Specific Appliances
  9. Inspection in the Field and Final Review
Language
English (United States)
Pages
69
Format
Digital book in PDF · read it on your phone or print it
Price
US$ 27 (United States)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

FG exam: 60 questions, 2 hours, open book — about 2 minutes to find each answer.
FG exam: 60 questions, 2 hours, open book — about 2 minutes to find each answer.
Listing label, data plate and instructions: where the code sends you to the manufacturer
Listing label, data plate and instructions: where the code sends you to the manufacturer
Point of delivery: meter outlet for natural gas; first regulator to 2 psig for LP-gas.
Point of delivery: meter outlet for natural gas; first regulator to 2 psig for LP-gas.
100,000 Btu/h ÷ 1,000 Btu/ft³ = 100 CFH: the conversion that opens every sizing question.
100,000 Btu/h ÷ 1,000 Btu/ft³ = 100 CFH: the conversion that opens every sizing question.
Test pressure 1.5× working pressure, never under 3 psig; 10 minutes minimum in a single-family dwelling.
Test pressure 1.5× working pressure, never under 3 psig; 10 minutes minimum in a single-family dwelling.
IFGC 304.5.1: 100,000 Btu/h needs at least 5,000 cu ft of room volume.
IFGC 304.5.1: 100,000 Btu/h needs at least 5,000 cu ft of room volume.
Category I to IV: non-positive or positive vent pressure × non-condensing or condensing, all on one grid.
Category I to IV: non-positive or positive vent pressure × non-condensing or condensing, all on one grid.
Fireplaces: no sediment trap required, shutoff may be remote per 409.5.2 (VERIFY).
Fireplaces: no sediment trap required, shutoff may be remote per 409.5.2 (VERIFY).

Take a Look at the 9 Parts and 65 Topics

The Exam and the Code Book

pp. 5-10
  1. How an Open-Book Exam Really Works
  2. The IFGC Map: 8 Chapters on One Page
  3. Tabbing and Highlighting Your Code Book
  4. The 4-Step Method: Chapter → Table → Row/Column → Exception
  5. Chapter 2 Words That Change the Answer
  6. IFGC, IRC Chapter 24 and NFPA 54

General Regulations and Appliance Location

pp. 11-18
  1. Listed and Labeled: Install per Manufacturer
  2. Rooms Where Fuel-Burning Appliances Don't Go
  3. Garages: The 18-Inch Rule
  4. Attic Appliances: Access and Service Space
  5. Crawl Spaces and Rooftops
  6. Clearance to Combustibles and How to Reduce It
  7. Condensate Disposal
  8. Electrical Bonding of Gas Piping and CSST

Gas Piping: Materials and Installation

pp. 19-27
  1. From Point of Delivery to Appliance
  2. Approved Pipe Materials at a Glance
  3. Joints and Fittings
  4. Prohibited Locations for Gas Piping
  5. Concealed Piping and Shield Plates
  6. Underground Piping: Depth and Tracer Wire
  7. Pipe Support Intervals
  8. Drips, Sediment Traps and Slope
  9. Appliance Connectors

Gas Pipe Sizing

pp. 28-34
  1. Btu/h to CFH: The First Conversion
  2. Picking the Right Table
  3. Longest Length Method, Step by Step
  4. The Most Common Sizing Mistakes
  5. Branch Length Method
  6. 2 PSI Systems and Hybrid Pressure
  7. Sizing CSST and LP Systems

Testing, Purging, Valves and Regulators

pp. 35-41
  1. The Pressure Test: Pressure, Time, Gauge
  2. Test Medium and What to Isolate
  3. Purging: Inside or Outside
  4. Appliance Shutoff Valves: Within 6 Feet
  5. Other Shutoff Valves
  6. Pressure Regulators and Their Vents
  7. Overpressure Protection

Combustion Air

pp. 42-48
  1. Why Combustion Air: Sizing by the Room
  2. Indoor Air: Two Openings to Another Room
  3. Outdoor Air: Two Openings
  4. Outdoor Air: One Opening
  5. Combination Indoor and Outdoor Air
  6. Louvers, Grilles and Screens
  7. Mechanical Combustion Air and Direct-Vent

Venting

pp. 49-57
  1. Appliance Categories I–IV
  2. Vent Types: B, BW, L, Single-Wall, Masonry
  3. Vent Connectors: Rise, Length and Slope
  4. Common Venting Two Appliances
  5. Sizing Category I Vents with the Tables
  6. Gas Vent Termination Above the Roof
  7. Through-Wall Terminals: Distances to Openings
  8. Masonry Chimneys and Liners
  9. Draft Hoods and Barometric Dampers

Specific Appliances

pp. 58-64
  1. Furnaces and Boilers
  2. Water Heaters (Fuel Side)
  3. Clothes Dryer Exhaust
  4. Unvented Room Heaters
  5. Gas Fireplaces and Decorative Appliances
  6. Ranges, Cooktops and Commercial Kitchens
  7. Outdoor Appliances and Generators

Inspection in the Field and Final Review

pp. 65-69
  1. Permits, Inspections and the Red Tag
  2. Existing Appliances: Appendix D Check
  3. The 10 Numbers to Remember
  4. Where to Find It: Topic → Section Index
  5. Exam Day Checklist

Who This Book Is For

You're studying the IFGC at night

Each code topic on one page, with the section to find it, so an hour after work actually moves you forward.

Your FG exam date is close

The 4-step method and the topic-to-section index train you to find the right table fast in an open-book exam.

You already work as an inspector

Print the pages you need and have the rule and the code section at hand when a contractor questions a red tag.

Plus: 2 Free Books

FG Exam-Style Practice Questions
BONUS 1

FG Exam-Style Practice Questions

Practice questions in the style of the open-book exam, each answer with the code section where you find it, so you train your speed with the book, not just your memory.

15 Common Fuel Gas Mistakes, Before & After
BONUS 2

15 Common Fuel Gas Mistakes, Before & After

The most frequent fuel gas mistakes drawn side by side, wrong and right, so you spot them on the exam and on the job site at a glance.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've installed gas for years and now I'm going for the FG certification?

Yes. It doesn't teach you how to pipe a house: it shows each IFGC topic drawn and where to find it in the code book, which is what an open-book exam asks of you.

Does it match my exam's IFGC edition, 2021 or 2024?

It's built on the International Fuel Gas Code, 2021 and 2024 editions, with IRC Chapter 24 and NFPA 54 as references. Where a section number or a requirement differs between the two editions, the page shows it. Check which edition your ICC exam bulletin lists and use that code book.

Is it official material?

No. It's an independent study book, not published, endorsed or reviewed by the ICC. It doesn't give you a certificate or CEUs: the FG certification comes only from passing the ICC exam.

Does it replace the code book or a prep course?

No. You still need the IFGC edition your exam uses, and that's the book you take into the exam: the testing center only allows the references listed in your ICC bulletin, so this PDF stays home. You study with it before, so on exam day you know which chapter, table and section to open.

Are the practice questions the ones on the exam?

No. They're written for this book, in the style of an open-book exam, with the code section where you find each answer.

When and how do I get it?

As a PDF by email, at the address you enter at checkout. The 2 bonus books come the same way.

Do I have to pay every month?

No. It's a one-time payment, with no subscription.

Can I have it on paper?

Yes. The PDF is ready to print: print the whole book or just the pages you want to take to the job site.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

US$ 27US$ 63
Get the book · US$ 27

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Chimney Sweep Illustrated

Every part of a masonry and factory-built chimney, the 3 inspection levels, creosote stages, clearances to combustibles…

From US$ 27 US$ 63

Stationary Engineer Illustrated

Boiler room and building plant operation in drawings, one topic per page: fire-tube and water-tube boilers, safety…

From US$ 27 US$ 63

Gas Hearth Specialist Illustrated

Gas fireplaces, inserts, log sets and stoves explained one topic per page, each with a clear drawing: venting and…

From US$ 27 US$ 63

Propane Technician Illustrated

Propane Technician Illustrated explains LP-gas systems one topic per page, each with a big, clear drawing: propane…

From US$ 27 US$ 63

Boiler Operator Illustrated

An illustrated study book for boiler operators: one topic per page, every concept drawn. Follow the boiler as one path…

From US$ 27 US$ 63

Oil Burner Technician Illustrated

Residential oil heating explained one topic per page, every part drawn: tank, fuel lines, burner, nozzle, primary…

From US$ 27 US$ 63

Wood Stove Installer Illustrated

Wood stove, fireplace insert and chimney installation explained one topic per page, with every concept drawn: draft…

From US$ 27 US$ 63