Study in Pictures🌐 English (United States)
Residential Inspector Illustrated

Digital book in PDF · read it on your phone or print it

Residential Inspector Illustrated

Footings, floor joists, studs, rafters, stairs, egress, guards, fire separation and flashing. Every topic has its own page: the drawing first, then what you need to remember.

  • 70 illustrated pages
  • English
  • 30-day guarantee
US$ 27US$ 63
Get the book · US$ 27

Price shown for: United States. In other countries, the checkout shows the price that applies there.

About this book

What it is

Footings, floor joists, studs, rafters, stairs, egress, guards, fire separation and flashing. Every topic has its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're studying for the B1
  • Your exam date is close
  • You already inspect for the city
What it covers
  1. How the Code and the Exam Work
  2. Design Criteria Before You Dig
  3. Footings and Foundations
  4. Floor Framing
  5. Wall Framing
  6. Roofs, Ceilings and Chimneys
  7. Life Safety: Stairs, Egress and Fire
  8. Envelope and Energy
  9. Review and Exam Practice
Language
English (United States)
Pages
70
Format
Digital book in PDF · read it on your phone or print it
Price
US$ 27 (United States)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

ICC B1: 60 questions, 2 hours, open book with the IRC edition you registered for.
ICC B1: 60 questions, 2 hours, open book with the IRC edition you registered for.
Table R301.2: snow, wind, seismic, weathering, frost line, termite, ice barrier and flood, filled in locally.
Table R301.2: snow, wind, seismic, weathering, frost line, termite, ice barrier and flood, filled in locally.
R403.1.1: 12 in wide × 6 in thick minimum; real size from Tables R403.1(1)–(3)
R403.1.1: 12 in wide × 6 in thick minimum; real size from Tables R403.1(1)–(3)
R502.6.1: lapped joists overlap 3 in with three 10d nails; spread doubles blocked at 4 ft o.c.
R502.6.1: lapped joists overlap 3 in with three 10d nails; spread doubles blocked at 4 ft o.c.
2x4 bearing studs: 24 in o.c. under a roof, 16 in o.c. with one floor, 10 ft max height
2x4 bearing studs: 24 in o.c. under a roof, 16 in o.c. with one floor, 10 ft max height
Rafter span: Tables R802.4.1(1)–(8), measured along the horizontal projection.
Rafter span: Tables R802.4.1(1)–(8), measured along the horizontal projection.
Riser 7-3/4 in max · tread 10 in min · headroom 6 ft 8 in · 3/8 in variation (R318.7)
Riser 7-3/4 in max · tread 10 in min · headroom 6 ft 8 in · 3/8 in variation (R318.7)
R703 wall in layers: WRB lapped like shingles, flashing at openings, plus the R903.2.1 kick-out at roof-wall eaves.
R703 wall in layers: WRB lapped like shingles, flashing at openings, plus the R903.2.1 kick-out at roof-wall eaves.

Take a Look at the 9 Parts and 66 Topics

How the Code and the Exam Work

pp. 5-12
  1. The B1 Exam: What It Covers and Which Book You Bring
  2. The IRC in One Map: What Lives in Each Chapter
  3. How to Read a Section Number
  4. Footnotes Change the Answer
  5. Defined Terms: The Italic Words in Chapter 2
  6. The 4-Step Open-Book Lookup
  7. Index or Table of Contents: When to Use Each
  8. Permits and the Inspection Sequence

Design Criteria Before You Dig

pp. 13-17
  1. Table R301.2 (2021: R301.2(1)): The Jurisdiction's Data Sheet
  2. Live Loads by Room: Table R301.5
  3. Deflection Limits: L/360 and L/240
  4. Presumptive Soil Bearing Values
  5. Climate Zones and Where They Show Up

Footings and Foundations

pp. 18-25
  1. Footing Size: Width and Thickness
  2. Footing Depth: 12 Inches and the Frost Line
  3. Concrete Strength by Exposure
  4. Anchor Bolts: Size, Spacing and Ends
  5. Foundation Walls: Reading the Unbalanced Backfill Tables
  6. Drainage and Dampproofing
  7. Crawl Spaces: Vents and Access
  8. Wood Near the Ground: Clearances and Treated Lumber

Floor Framing

pp. 26-32
  1. Reading a Floor Joist Span Table
  2. Bearing: 1-1/2 Inches on Wood, 3 Inches on Concrete
  3. Notches in Joists: Where and How Deep
  4. Holes in Joists: The 2-Inch Rule
  5. Openings in the Floor: Headers and Trimmers
  6. Joists Under Bearing Walls and Lapped Joists
  7. Girders and Built-Up Beams

Wall Framing

pp. 33-40
  1. Stud Size, Height and Spacing
  2. The Fastening Schedule: Nails by Joint
  3. Double Top Plate: The 24-Inch Offset
  4. Notching and Boring Studs
  5. Cut Top Plates: The Steel Strap
  6. Headers: Span Table and Jack Studs
  7. Braced Wall Lines in One Drawing
  8. Bracing Methods by Name

Roofs, Ceilings and Chimneys

pp. 41-47
  1. Reading a Rafter Span Table
  2. Rafter Ties and Ceiling Joists: Stopping the Walls From Spreading
  3. Uplift: Connecting the Roof to the Walls
  4. Attic Ventilation: 1/150 and 1/300
  5. Attic Access: 22 by 30
  6. Shingles: Slope, Underlayment and Ice Barrier
  7. Chimneys and Fireplaces: The 3-2-10 Rule and the Hearth

Life Safety: Stairs, Egress and Fire

pp. 48-60
  1. Stair Geometry: Riser, Tread and Headroom
  2. Nosings, Landings and the 151-Inch Rise
  3. Winders and Spiral Stairs
  4. Handrails: Height and Grip
  5. Guards: 30 Inches, 36 Inches and the 4-Inch Sphere
  6. Emergency Escape Openings: 5.7, 24, 20, 44
  7. Window Wells for Basement Escape
  8. Smoke and CO Alarms: Where Each One Goes
  9. The Garage Wall: Gypsum and the Door
  10. Fireblocking vs. Draftstopping
  11. Fire Separation: Two-Family and Townhouses
  12. Safety Glazing: The Hazardous Locations
  13. Room Size and Ceiling Height

Envelope and Energy

pp. 61-65
  1. Water-Resistive Barrier and Flashing
  2. The Insulation Table by Climate Zone
  3. Air Sealing and the Blower Door
  4. Ducts: Insulation and Leakage Testing
  5. Decks: Ledger, Footings and Guards

Review and Exam Practice

pp. 66-70
  1. The Numbers to Have on One Page
  2. Your Tab Plan for the Code Book
  3. Timing an Open-Book Exam
  4. Look-Alike Rules That Get Mixed Up
  5. Five Lookups Worked From Question to Table

Who This Book Is For

You're studying for the B1

Every chapter becomes a page you can picture, in the order a house gets built and inspected.

Your exam date is close

You review the key numbers and practice the 4-step lookup, so your exam time goes to answering, not searching.

You already inspect for the city

Print the pages you use and keep them in the truck: footings, framing, stairs, egress, each with the IRC section to back up a correction.

Plus: 2 Free Books

Open-Book Practice Questions: B1-Style, with the Code Section for Every Answer
BONUS 1

Open-Book Practice Questions: B1-Style, with the Code Section for Every Answer

Practice the way the exam works: every answer shows the chapter, section and table where you find it, so you train your speed in the code book, not just your memory.

Common Code Mistakes, Before & After
BONUS 2

Common Code Mistakes, Before & After

The most frequent residential code mistakes on site, from bored joists to missing fireblocking, drawn wrong and right side by side so you spot them in seconds.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've been building for 20 years and the code is what's new?

Yes. The book doesn't teach you how to frame a wall. It shows you where the code says what you already know, in the order you inspect.

Where does the content come from?

From the 2021 IRC, the edition listed in the current ICC B1 exam content outline. Each page points to its section or table. It doesn't include state or local amendments: if your jurisdiction changed a number, mark it on the page and go with your adopted code.

Is it official material?

No. It's independent study material. It's not affiliated with or endorsed by the ICC, and it doesn't reproduce the code text: it draws each topic and sends you to the section.

Does it replace a course or the code book?

No. You still need your approved code book, and the PDF can't go into the exam with you. What goes in with you is the method: you tab your code book with the tab plan and practice the 4-step lookup until finding a table is automatic. It's not a course and it doesn't give a certificate or CEUs.

Are the practice questions the real exam questions?

No. They're written for this book in the style of an open-book exam, and every answer shows the chapter, section and table where you find it.

When and how do I get it?

The book and the 2 bonus books come as PDFs by email, to the address you enter at checkout.

Do I have to pay every month?

No. It's a one-time payment.

Can I have it on paper?

Yes. The PDFs are ready to print, at home or at a print shop.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

US$ 27US$ 63
Get the book · US$ 27

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Home Inspector Exam Illustrated

Study for the NHIE one house system per page: big labeled cutaway drawings, the defects to recognize, how the exam…

From US$ 27 US$ 63

Electrical Inspector Illustrated

Residential electrical inspection explained one topic per page, each with a big, clear drawing: service entrance…

From US$ 27 US$ 63

Lead Inspector Illustrated

Lead inspection and risk assessment, one topic per page and every concept drawn: XRF readings, paint chip, dust wipe…

From US$ 27 US$ 63

Plumbing Inspector Illustrated

Residential plumbing inspection, one topic per page and drawn: the underground, rough-in and final sequence, DWV and…

From US$ 27 US$ 63

Mechanical Inspector Illustrated

Residential mechanical inspection drawn one topic per page: appliance access and clearances, combustion air, vent…

From US$ 27 US$ 63