Study in Pictures🌐 English (United States)
Mechanical Inspector Illustrated

Digital book in PDF · read it on your phone or print it

Mechanical Inspector Illustrated

Appliance access, combustion air, vent categories, vent connectors, ducts, dryer ducts, condensate drains and gas piping. Every topic gets its own page: the drawing first, then what you need to remember.

  • 68 illustrated pages
  • English
  • 30-day guarantee
US$ 27US$ 63
Get the book · US$ 27

Price shown for: United States. In other countries, the checkout shows the price that applies there.

About this book

What it is

Appliance access, combustion air, vent categories, vent connectors, ducts, dryer ducts, condensate drains and gas piping. Every topic gets its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're studying for the M1 exam
  • Your exam date is set
  • You're already inspecting
What it covers
  1. The Exam and the Code Book
  2. Equipment, Location and Access
  3. Combustion Air
  4. Venting
  5. Ducts and Return Air
  6. Exhaust and Dryer Ducts
  7. Condensate and Refrigerant
  8. Gas Piping
  9. Fireplaces, CO and the Final Walk
Language
English (United States)
Pages
68
Format
Digital book in PDF · read it on your phone or print it
Price
US$ 27 (United States)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

Installer vs. inspector: same equipment, one rule — cite the code section, not an opinion.
Installer vs. inspector: same equipment, one rule — cite the code section, not an opinion.
M1401.3 and M1601.1: Manual J loads → Manual S equipment → Manual D ducts
M1401.3 and M1601.1: Manual J loads → Manual S equipment → Manual D ducts
G2407.5.1: 50 cu ft per 1,000 Btu/h — 120,000 Btu/h needs 6,000 cu ft
G2407.5.1: 50 cu ft per 1,000 Btu/h — 120,000 Btu/h needs 6,000 cu ft
Category I to IV: negative or positive pressure × condensing or not, drawn as one 2×2 grid.
Category I to IV: negative or positive pressure × condensing or not, drawn as one 2×2 grid.
M1601.1.1: no supply plenums in stud or joist cavities; exterior wall cavities never; gypsum returns 125°F max.
M1601.1.1: no supply plenums in stud or joist cavities; exterior wall cavities never; gypsum returns 125°F max.
Bath 50 cfm intermittent / 20 continuous · Kitchen 100 / 25 · rated at 0.25 in. w.c.
Bath 50 cfm intermittent / 20 continuous · Kitchen 100 / 25 · rated at 0.25 in. w.c.
Condensate drain: 3/4 in minimum, 1/8 in per foot slope, clearable without cutting (IRC M1411.3).
Condensate drain: 3/4 in minimum, 1/8 in per foot slope, clearable without cutting (IRC M1411.3).
Steel, copper, CSST and PE: four gas piping materials, each sized with its own G2413.4 table.
Steel, copper, CSST and PE: four gas piping materials, each sized with its own G2413.4 table.

Take a Look at the 9 Parts and 64 Topics

The Exam and the Code Book

pp. 5-9
  1. From Installer to Inspector: What Changes
  2. The M1 Exam at a Glance
  3. The IRC Mechanical Map: Chapters 12 to 24
  4. How to Find a Code Section in Under a Minute
  5. Listing, Labeling and Manufacturer's Instructions

Equipment, Location and Access

pp. 10-17
  1. Sizing: Manual J, S and D
  2. Working Space in Front of the Appliance
  3. Appliances in Attics: Passageway and Opening
  4. Attic Service Space, Light and Receptacle
  5. Appliances in Crawl Spaces
  6. Garages: 18 Inches and Impact Protection
  7. Rooms Where Fuel-Burning Appliances Can't Go
  8. Platforms, Supports and the Service Receptacle

Combustion Air

pp. 18-22
  1. Why Combustion Air: The 50 Cubic Feet Rule
  2. Indoor Combustion Air: Two Openings
  3. Outdoor Air: 1/4,000, 1/2,000 and 1/3,000
  4. Free Area: Louvers and Grilles
  5. Direct-Vent Appliances Skip the Math

Venting

pp. 23-33
  1. The Four Vent Categories
  2. Type B Vent: Clearances and Use
  3. Vent Connectors: Rise and Slope
  4. Single-Wall Connectors: Where Not Allowed
  5. Connector Length and Size
  6. Common Venting Two Appliances
  7. The Orphaned Water Heater
  8. Category IV Plastic Venting
  9. B-Vent Roof Termination
  10. Sidewall Terminations: Direct-Vent Clearances
  11. Mechanical-Draft Terminations

Ducts and Return Air

pp. 34-40
  1. Duct Materials and Building Cavities
  2. Sealing Joints: Mastic and UL 181 Tape
  3. Supporting Flexible Duct
  4. Duct Insulation and the Leakage Test
  5. Where Return Air Can't Come From
  6. Ducts in Garages
  7. Filters, Clearances and Underground Ducts

Exhaust and Dryer Ducts

pp. 41-47
  1. Bathroom and Kitchen Exhaust Rates
  2. Exhaust Goes Outdoors, Not the Attic
  3. Kitchen Hood Ducts and Makeup Air
  4. Dryer Duct Material and Diameter
  5. Dryer Duct Length: 35 Feet Minus Fittings
  6. Transition Duct and Termination
  7. Whole-House Ventilation

Condensate and Refrigerant

pp. 48-52
  1. Primary Condensate Drain
  2. Secondary Drain or Auxiliary Pan
  3. Where the Secondary Drain Ends
  4. Condensate Pumps
  5. Refrigerant Lines and Locking Caps

Gas Piping

pp. 53-61
  1. Approved Gas Piping Materials
  2. Sizing Gas Pipe: The Longest Length Method
  3. CSST Bonding
  4. Concealed Piping and Shield Plates
  5. Supporting Gas Pipe
  6. Underground Gas Pipe
  7. Shutoff Valve and Sediment Trap
  8. Appliance Connectors
  9. The Pressure Test

Fireplaces, CO and the Final Walk

pp. 62-68
  1. Masonry Chimney: 3-2-10
  2. Factory-Built Fireplaces and Gas Logs
  3. Carbon Monoxide Alarms
  4. Rough-In Inspection Order
  5. Final Inspection Order
  6. Write-Ups That Come Up Most Often
  7. How to Write a Correction Notice

Who This Book Is For

You're studying for the M1 exam

You've done the work for years. Here each code topic is drawn the way you already see it on the job, so you learn the code's language without wading through paragraphs.

Your exam date is set

Go through it in the order you inspect a house, check each value against your edition, and know which section to open when a question comes up.

You're already inspecting

Keep it printed in the truck: clearances, vent rules, condensate and gas piping on one page each, to check in seconds before you write something up.

Plus: 2 Free Books

Mechanical Inspector Practice Questions: Exam-Style Questions with Explained Answers
BONUS 1

Mechanical Inspector Practice Questions: Exam-Style Questions with Explained Answers

Practice with questions written in exam style, each answer explained with the drawing and the code section to look up, so you find out what you still mix up before test day.

The 15 Most Common Mechanical Violations, Before & After
BONUS 2

The 15 Most Common Mechanical Violations, Before & After

See the 15 most common write-ups in residential mechanical work drawn wrong and then right, so you spot them in seconds on the job and on the exam.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've been an HVAC tech for years and I'm going for the inspector certification?

Yes. It isn't a beginner's book: it takes the work you already know and shows it in the code's terms, topic by topic. It also works for building or combination inspectors adding the mechanical certification.

Where does the content come from?

From the 2021 International Residential Code, Chapters 12–24 (Mechanical and Fuel Gas), and the ICC candidate bulletin for the Residential Mechanical Inspector (M1) exam. If your exam or your jurisdiction uses the 2018 or 2024 edition, the topics are largely the same, but some values and section numbers can change. That's why every page cites its section: you check it against your edition and your local amendments in seconds.

Is this official material?

No. It's independent study material. It isn't published, endorsed or approved by the ICC or any building department, and it doesn't give you a certificate or continuing education credits: the certification comes only from passing the ICC exam.

The M1 exam is open book. Why do I need another book?

Because open book doesn't mean time to read. The code book is your reference in the exam, but if you have to hunt through paragraphs on every question, the clock runs out. This book helps you understand each topic beforehand and know which section to open. It doesn't replace the code book adopted by your jurisdiction, a course or your field experience.

Are the practice questions the actual exam questions?

No. They're written for this book in exam style, with explained answers. They aren't official questions from any exam.

When and how do I get it?

The book and the 2 bonus books come as PDFs by email, to the address you enter at checkout.

Do I have to pay every month?

No. It's a one-time payment.

Can I get it on paper?

It's a PDF you can print at home or at a print shop, and keep in the truck.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

US$ 27US$ 63
Get the book · US$ 27

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Home Inspector Exam Illustrated

Study for the NHIE one house system per page: big labeled cutaway drawings, the defects to recognize, how the exam…

From US$ 27 US$ 63

Electrical Inspector Illustrated

Residential electrical inspection explained one topic per page, each with a big, clear drawing: service entrance…

From US$ 27 US$ 63

Lead Inspector Illustrated

Lead inspection and risk assessment, one topic per page and every concept drawn: XRF readings, paint chip, dust wipe…

From US$ 27 US$ 63

Plumbing Inspector Illustrated

Residential plumbing inspection, one topic per page and drawn: the underground, rough-in and final sequence, DWV and…

From US$ 27 US$ 63

Elevator Inspector Illustrated

Elevator and escalator inspection explained one topic per page, each with a big, clear drawing: traction, hydraulic and…

From US$ 27 US$ 63