Study in Pictures🌐 English (United States)
HVAC Technician Illustrated

Digital book in PDF · read it on your phone or print it

HVAC Technician Illustrated

HVAC Technician Illustrated: the refrigeration cycle, manifold gauges, superheat and subcooling, airflow, thermostat wiring, gas furnaces, heat pumps, EPA 608, the new A2L refrigerants (R-454B, R-32) and troubleshooting. Every topic gets its own page: the drawing first, then what you need to remember.

  • 68 illustrated pages
  • English
  • 30-day guarantee
US$ 27US$ 63
Get the book · US$ 27

Price shown for: United States. In other countries, the checkout shows the price that applies there.

About this book

What it is

HVAC Technician Illustrated: the refrigeration cycle, manifold gauges, superheat and subcooling, airflow, thermostat wiring, gas furnaces, heat pumps, EPA 608, the new A2L refrigerants (R-454B, R-32) and troubleshooting. Every topic gets its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're an apprentice or in trade school
  • Your EPA 608 exam is coming up
  • You already take the HVAC calls
What it covers
  1. How the System Works
  2. Pressure, Temperature and Gauges
  3. Superheat, Subcooling and Charge
  4. Airflow Before Refrigerant
  5. Electrical and Controls
  6. Gas Furnaces
  7. Heat Pumps
  8. Refrigerant Rules: EPA 608 and A2L
  9. Troubleshooting and Review
Language
English (United States)
Pages
68
Format
Digital book in PDF · read it on your phone or print it
Price
US$ 27 (United States)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

Heat in at the indoor coil, heat out at the condenser · 1 ton = 12,000 BTU/h
Heat in at the indoor coil, heat out at the condenser · 1 ton = 12,000 BTU/h
psia = psig + 14.7 at sea level; below 0 psig, read in. Hg, then microns
psia = psig + 14.7 at sea level; below 0 psig, read in. Hg, then microns
Superheat = suction line temp − saturation temp, probe 6 in. from the service valve
Superheat = suction line temp − saturation temp, probe 6 in. from the service valve
About 400 CFM per ton (350-450): low airflow drops suction, and superheat on fixed orifice
About 400 CFM per ton (350-450): low airflow drops suction, and superheat on fixed orifice
Lockout in 6 steps: the meter is tested on a live source before and after
Lockout in 6 steps: the meter is tested on a live source before and after
Cutaway of a 90%+ furnace: inducer, pressure switch, igniter, gas valve, burners, flame sensor, heat exchanger, blower.
Cutaway of a 90%+ furnace: inducer, pressure switch, igniter, gas valve, burners, flame sensor, heat exchanger, blower.
Heating check: high side at the indoor coil, rise often about 20-30 °F, charge by the heating chart.
Heating check: high side at the indoor coil, rise often about 20-30 °F, charge by the heating chart.
Type I = 5 lb or less · Type II = high and very high pressure · Type III = low pressure · Universal = all
Type I = 5 lb or less · Type II = high and very high pressure · Type III = low pressure · Universal = all

Take a Look at the 9 Parts and 64 Topics

How the System Works

pp. 5-11
  1. Heat Moves From Hot to Cold, Never the Other Way
  2. The 4 Components of the Refrigeration Cycle
  3. Low Side in Blue, High Side in Red
  4. The 3 States of Refrigerant in the Loop
  5. Latent vs. Sensible Heat
  6. Split System Anatomy: Outdoor and Indoor
  7. Metering Devices: Fixed Orifice vs. TXV

Pressure, Temperature and Gauges

pp. 12-19
  1. psig, psia and Inches of Mercury
  2. The Pressure-Temperature Relationship
  3. How to Read a PT Chart
  4. The Manifold Gauge Set, Part by Part
  5. Hooking Up Gauges Without Losing Charge
  6. Typical Operating Pressures for R-410A
  7. Refrigerants Compared: R-22, R-410A, R-454B, R-32
  8. Glide: Bubble Point and Dew Point

Superheat, Subcooling and Charge

pp. 20-27
  1. What Superheat Really Measures
  2. Superheat: Worked Example in 3 Steps
  3. What Subcooling Really Measures
  4. Subcooling: Worked Example in 3 Steps
  5. Superheat vs. Subcooling: Don't Mix Them Up
  6. Charging a Fixed Orifice System by Target Superheat
  7. Charging a TXV System by Subcooling
  8. Reading the 4 Numbers Together

Airflow Before Refrigerant

pp. 28-32
  1. 400 CFM per Ton: Why Airflow Comes First
  2. Temperature Split Across the Coil
  3. Static Pressure Like Blood Pressure
  4. The Usual Airflow Killers
  5. Frozen Evaporator Coil: Airflow or Charge?

Electrical and Controls

pp. 33-41
  1. Electrical Safety: Lockout and Live-Dead-Live
  2. Volts, Amps, Ohms: Ohm's Law on One Page
  3. The 24 V Control Circuit and the Transformer
  4. Thermostat Wiring: R, C, W, Y, G, O/B
  5. The Contactor
  6. Run Capacitors: HERM, FAN, C
  7. Compressor Windings: C, S, R
  8. Amp Draw vs. RLA and LRA
  9. Reading a Ladder Diagram

Gas Furnaces

pp. 42-48
  1. Furnace Anatomy
  2. Sequence of Operation in 8 Steps
  3. Flame Sensing and Microamps
  4. Pressure Switch and Venting
  5. Gas Pressure and Temperature Rise
  6. Limit and Rollout Switches
  7. Carbon Monoxide and Combustion Safety

Heat Pumps

pp. 49-53
  1. A Heat Pump Is an AC That Runs Backward
  2. The Reversing Valve
  3. Defrost: Why and How
  4. Aux Heat, Emergency Heat and Balance Point
  5. Checking a Heat Pump in Heating Mode

Refrigerant Rules: EPA 608 and A2L

pp. 54-60
  1. EPA 608: Core, Type I, II, III, Universal
  2. No Venting: What the Law Says
  3. Recovery, Recycling, Reclaiming
  4. Recovery Cylinders: 80 % Rule and Colors
  5. Evacuation and Leak Testing
  6. The AIM Act Transition: Why R-410A Is Being Replaced
  7. Working With A2L Refrigerants Safely

Troubleshooting and Review

pp. 61-68
  1. The Diagnostic Order: Same 4 Steps Every Call
  2. No-Cool Call: Outdoor Unit Not Running
  3. No-Cool Call: Unit Running, Air Not Cold
  4. No-Heat Call: Gas Furnace
  5. No-Heat Call: Heat Pump
  6. Brazing With Nitrogen
  7. The Most Frequent Mistakes, Drawn
  8. One-Page Review: Formulas and Numbers

Who This Book Is For

You're an apprentice or in trade school

You see the whole system drawn first, so every class and every ride-along fits into a picture you already have.

Your EPA 608 exam is coming up

Core, Type I, II and III, recovery, the 80% rule and the A2L rules, each drawn on its own page, plus practice questions with the answer and a one-line why.

You already take the HVAC calls

Superheat, subcooling, airflow and wiring in the same order every time, printed and kept in the truck for when a call doesn't add up.

Plus: 2 Free Books

HVAC Exam-Style Practice Questions, Answered
BONUS 1

HVAC Exam-Style Practice Questions, Answered

Test yourself on the cycle, gauges, electrical and safety with exam-style questions, each with the answer and a one-line why, so you know what to review before test day.

Common HVAC Mistakes: Quick-Reference Cards
BONUS 2

Common HVAC Mistakes: Quick-Reference Cards

The most frequent field and exam mistakes (adding refrigerant before checking airflow, mixing up superheat and subcooling, skipping the capacitor test) on printable cards to keep in the truck.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I already work in HVAC?

Yes. It starts with the cycle, but it goes on to charging by superheat and subcooling, amp draw vs. RLA, ladder diagrams and the troubleshooting order. It also works for apprentices and for maintenance techs who get the HVAC calls.

Where does the content come from?

The refrigerant material is checked against current EPA rules: Clean Air Act Section 608 (40 CFR Part 82, Subpart F) and the AIM Act Technology Transitions rule (40 CFR Part 84), which covers the move to lower-GWP refrigerants like R-454B and R-32 and working safely with A2Ls. Everything else is standard residential HVAC practice. Always follow the manufacturer's instructions and your local code.

Is this official material?

No. It's an independent illustrated study book, not affiliated with the EPA or any certifying body, and it doesn't give you a certification. EPA 608 certification comes only from passing the exam with an EPA-approved certifying organization.

I already have my course manual and free videos. Why this, and does it replace my training?

Every topic is drawn on its own page, in the same order, so you find it and review it in a minute instead of digging through a manual or ten videos. It doesn't replace a training program, supervised field work, manufacturer instructions or local code: it's for understanding and reviewing what you're learning.

Are the practice questions the ones on the exam?

No. They're written for this book in exam style, each with the answer and a one-line why. They aren't official questions from any exam.

When and how do I get it?

The book and the 2 bonus books come as PDFs by email, sent to the address you enter at checkout.

Do I have to pay every month?

No. It's a one-time payment, with no subscription.

Can I have it on paper?

Yes. It's a PDF made to print. Print the whole thing or just the pages you need and keep them in the truck.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

US$ 27US$ 63
Get the book · US$ 27

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

HVAC & EPA 608, Illustrated

Review EPA 608 (Core, Type I, II and III) and the refrigeration cycle one page at a time, drawn and checked against the…

From US$ 27 US$ 63

EPA 608 Illustrated

Study for the EPA Section 608 exam (Core, Type I, Type II and Type III) one illustrated topic per page: the…

From US$ 27 US$ 63

Mechanical Ventilation Illustrated

Mechanical ventilation, one topic per page, with big clear drawings: tidal volume, PEEP, FiO2 and I:E ratio, volume vs…

From US$ 27 US$ 63

Ammonia Refrigeration Illustrated

See the whole industrial ammonia plant one page at a time: R-717 hazards, screw and reciprocating compressors, liquid…

From US$ 27 US$ 63