Study in Pictures🌐 English (United States)
Ammonia Refrigeration Illustrated

Digital book in PDF · read it on your phone or print it

Ammonia Refrigeration Illustrated

R-717 hazards, reciprocating and screw compressors, the oil separator, the recirculator, liquid overfeed, hand valves, purgers and P&ID symbols. Every topic gets its own page: the drawing first, then what you need to remember.

  • 64 illustrated pages
  • English
  • 30-day guarantee
US$ 27US$ 63
Get the book · US$ 27

Price shown for: United States. In other countries, the checkout shows the price that applies there.

About this book

What it is

R-717 hazards, reciprocating and screw compressors, the oil separator, the recirculator, liquid overfeed, hand valves, purgers and P&ID symbols. Every topic gets its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're studying for the operator certification
  • Your exam is a few weeks away
  • You already run the engine room
What it covers
  1. R-717: Know What's in the Pipes
  2. The Loop: Pressure and Temperature
  3. Compressors
  4. Vessels and Heat Exchangers
  5. Evaporators and Liquid Feed
  6. Valves, Controls and Purging
  7. Reading P&IDs and Running the Plant
  8. Safety, Codes and Review
Language
English (United States)
Pages
64
Format
Digital book in PDF · read it on your phone or print it
Price
US$ 27 (United States)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

R-717 = anhydrous NH3: about 584 Btu/lb at -20°F, PSM from 10,000 lb.
R-717 = anhydrous NH3: about 584 Btu/lb at -20°F, PSM from 10,000 lb.
High side: discharge to expansion device. Low side: expansion device back to suction.
High side: discharge to expansion device. Low side: expansion device back to suction.
Reciprocating compressor cutaway: suction and discharge valves, unloaders, water-cooled heads and the crankcase sight glass.
Reciprocating compressor cutaway: suction and discharge valves, unloaders, water-cooled heads and the crankcase sight glass.
Missing liquid head means flashing, noise and a low differential on the pump gauges.
Missing liquid head means flashing, noise and a low differential on the pump gauges.
Trapped liquid: wrong vs. right, with relief path, pump-out and lockout.
Trapped liquid: wrong vs. right, with relief path, pump-out and lockout.
Stop, angle, globe and ball valves, with seat, packing and back seat drawn in a cutaway.
Stop, angle, globe and ball valves, with seat, packing and back seat drawn in a cutaway.
Compressor, oil separator, condenser, receiver, recirculator, pump, evaporator: symbol vs. real equipment.
Compressor, oil separator, condenser, receiver, recirculator, pump, evaporator: symbol vs. real equipment.
IDLH 300 ppm: above it, or unknown, full-facepiece positive-pressure SCBA.
IDLH 300 ppm: above it, or unknown, full-facepiece positive-pressure SCBA.

Take a Look at the 8 Parts and 60 Topics

R-717: Know What's in the Pipes

pp. 5-11
  1. Why Plants Run on Ammonia
  2. Boiling Point: -28°F at 0 psig
  3. The Exposure Numbers on One Ruler
  4. Flammable, but Only in a Window
  5. Lighter Than Air… Except When It Isn't
  6. Ammonia Loves Water
  7. No Copper, No Brass

The Loop: Pressure and Temperature

pp. 12-19
  1. The Whole Plant on One Page
  2. High Side vs. Low Side
  3. Saturation: One Pressure, One Temperature
  4. psig, psia and Inches of Vacuum
  5. Worked Example: Gauge to Temperature
  6. Superheat and Subcooling
  7. Tons, Btu and Heat Moving Uphill
  8. Compression Ratio

Compressors

pp. 20-27
  1. Reciprocating Compressor, Inside
  2. Rotary Screw Compressor, Inside
  3. Slide Valve: Capacity Control
  4. Volume Ratio (Vi)
  5. Oil Pressure and Oil Temperature
  6. Two-Stage: Booster, Intercooler, High Stage
  7. Economizer on a Screw
  8. Compressor Safeties

Vessels and Heat Exchangers

pp. 28-35
  1. Oil Separator
  2. Evaporative Condenser
  3. High-Pressure Receiver
  4. Thermosiphon Oil Cooling
  5. Recirculator (Pumper Drum)
  6. Why the Recirculator Level Rises
  7. Liquid Pumps and NPSH
  8. Intercooler and Controlled-Pressure Receiver

Evaporators and Liquid Feed

pp. 36-43
  1. Three Ways to Feed an Evaporator
  2. Liquid Overfeed and the Overfeed Ratio
  3. The Evaporator Valve Group
  4. Air Units, Plate Freezers, Spiral Freezers
  5. Hot Gas Defrost: The Sequence
  6. Hydraulic Shock: Liquid Hammer
  7. Trapped Liquid Between Two Closed Valves
  8. Superheat at the Coil Outlet

Valves, Controls and Purging

pp. 44-50
  1. Hand Valves: Stop, Angle, Globe, Ball
  2. Solenoids and Check Valves
  3. Pressure Regulators
  4. Relief Valves and the Dual Relief Manifold
  5. Noncondensables and the Purger
  6. Level Controls and Floats
  7. Ammonia Detectors and Alarms

Reading P&IDs and Running the Plant

pp. 51-57
  1. P&ID Symbols: Vessels and Machines
  2. P&ID Symbols: Valves and Instruments
  3. Tracing a Line on a P&ID
  4. Pipe Labels on the Floor
  5. The Operating Log: What Each Reading Tells You
  6. Draining Oil: Step by Step
  7. Pumping Down a Component

Safety, Codes and Review

pp. 58-64
  1. PPE: What to Wear, When
  2. Exposure First Aid
  3. Emergency Shutdown and the King Valve
  4. PSM and RMP: The 10,000 lb Line
  5. The IIAR Standards Map
  6. Exam Topics Checklist
  7. One-Page Plant Review

Who This Book Is For

You're studying for the operator certification

You get the plant as one loop, from compressor to suction, instead of a list of vessels and valves. Each topic is a drawing you can come back to in the same order.

Your exam is a few weeks away

You review part by part with the exam topics checklist and the practice questions, and see where you still have gaps.

You already run the engine room

You print it and keep it by the log. The P&ID symbols, the valve bodies and the PPE are there when a new operator asks.

Plus: 2 Free Books

Ammonia Operator Practice Questions
BONUS 1

Ammonia Operator Practice Questions

Exam-style questions on every chapter, each with the answer and the page that explains it, so you find out what you really know before exam day.

15 Common Engine-Room Mistakes, Before & After
BONUS 2

15 Common Engine-Room Mistakes, Before & After

The operating mistakes made most often in ammonia plants, each drawn as the wrong way next to the right way, so you can spot them at a glance on your next shift.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've worked in the plant for years but never studied the ammonia system on paper?

Yes. It starts from what you already see on the floor and puts it in order, one component per page. It doesn't stop at the basics: Vi and the slide valve, two-stage systems and the economizer, NPSH on the liquid pumps, the hot gas defrost sequence and tracing a P&ID line each get their own page. If you know the plant by ear, this is where it fits into one loop.

Where does the content come from?

From the IIAR standards, ASHRAE 15, OSHA PSM (29 CFR 1910.119) and EPA RMP (40 CFR Part 68), and the published body of knowledge for industrial refrigeration operators. Every code reference is flagged so you check it against the current edition.

Is it official material?

No. It's independent study material, not affiliated with or endorsed by RETA, IIAR or any agency. It covers the topics operators review for certifications such as RETA's CARO and CIRO; check your exam's current outline.

Does it replace the course or my company's training?

No. It helps you study and review. Your company's training, your plant's written procedures and lockout/tagout always come first.

Are the practice questions the ones on the exam?

No. They're written for this book to help you check what you know. They aren't official questions from any exam.

When and how do I get it?

The book and the 2 bonus books come as PDFs by email, to the address you enter at checkout.

Do I have to pay every month?

No. It's a one-time payment.

Can I have it on paper?

We don't ship a printed book. You get a PDF by email that you can print, the whole book or just the pages you need, and keep in the engine room or next to the log.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

US$ 27US$ 63
Get the book · US$ 27

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

HVAC & EPA 608, Illustrated

Review EPA 608 (Core, Type I, II and III) and the refrigeration cycle one page at a time, drawn and checked against the…

From US$ 27 US$ 63

EPA 608 Illustrated

Study for the EPA Section 608 exam (Core, Type I, Type II and Type III) one illustrated topic per page: the…

From US$ 27 US$ 63

Mechanical Ventilation Illustrated

Mechanical ventilation, one topic per page, with big clear drawings: tidal volume, PEEP, FiO2 and I:E ratio, volume vs…

From US$ 27 US$ 63

HVAC Technician Illustrated

The HVAC system explained one topic per page, every page drawn: the refrigeration cycle and its 4 components, reading a…

From US$ 27 US$ 63