Study in Pictures🌐 English (United States)
Fireproofing Inspector Illustrated

Digital book in PDF · read it on your phone or print it

Fireproofing Inspector Illustrated

The approved fire-resistance design, surface prep, wet and dry mix, thickness readings, density, bond strength, coatings, repairs and reports. Every topic gets its own page: the drawing first, then what you need to know.

  • 69 illustrated pages
  • English
  • 30-day guarantee
US$ 27US$ 63
Get the book · US$ 27

Price shown for: United States. In other countries, the checkout shows the price that applies there.

About this book

What it is

The approved fire-resistance design, surface prep, wet and dry mix, thickness readings, density, bond strength, coatings, repairs and reports. Every topic gets its own page: the drawing first, then what you need to know.

Who This Book Is For
  • You're studying for the certification
  • Your exam date is set
  • You already inspect on site
What it covers
  1. The Job and the Exam
  2. Before the Hose Starts: Documents
  3. Steel Prep and Conditions
  4. Application
  5. Thickness Readings
  6. Density
  7. Bond Strength
  8. Coatings, Repairs and Reports
  9. Open-Book Exam and Review
Language
English (United States)
Pages
69
Format
Digital book in PDF · read it on your phone or print it
Price
US$ 27 (United States)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

The fireproofing inspection route, with the 5 checks the IBC asks for SFRM
The fireproofing inspection route, with the 5 checks the IBC asks for SFRM
Section 1705.15: inspection is based on the fire-resistance design in the approved documents.
Section 1705.15: inspection is based on the fire-resistance design in the approved documents.
IBC Section 1705.15.2: inspect the prepared surface before SFRM is applied
IBC Section 1705.15.2: inspect the prepared surface before SFRM is applied
Wet mix vs. dry mix: where the water goes in, and what the inspector watches in each
Wet mix vs. dry mix: where the water goes in, and what the inspector watches in each
IBC: thickness on at least 25% of structural members per floor.
IBC: thickness on at least 25% of structural members per floor.
In-place density can't be less than the approved design density, in pcf per ASTM E605.
In-place density can't be less than the approved design density, in pcf per ASTM E605.
Cohesion breaks inside the SFRM; adhesion breaks at the steel. Log which one.
Cohesion breaks inside the SFRM; adhesion breaks at the steel. Log which one.
Coatings: IBC Section 1705.16 and AWCI 12-B, not the SFRM density and pull tests.
Coatings: IBC Section 1705.16 and AWCI 12-B, not the SFRM density and pull tests.

Take a Look at the 9 Parts and 65 Topics

The Job and the Exam

pp. 5-11
  1. What a Fireproofing Special Inspector Actually Checks
  2. Why Fireproofing Exists: Steel Loses Strength with Heat
  3. SFRM vs. Mastic and Intumescent Coatings
  4. Continuous vs. Periodic Inspection
  5. Who You Report To
  6. The Certification Exam at a Glance
  7. How This Book Is Organized

Before the Hose Starts: Documents

pp. 12-18
  1. The Approved Fire-Resistance Design
  2. Reading a Design Listing in 5 Boxes
  3. Restrained vs. Unrestrained Ratings
  4. W/D Ratio: The Number That Changes Thickness
  5. Beam Substitution Equation, Worked Out
  6. Submittals You Need on Site
  7. The Preconstruction Meeting

Steel Prep and Conditions

pp. 19-25
  1. Surface Condition: What 'Ready' Looks Like
  2. Painted or Primed Steel
  3. Bonding Agents and Metal Lath
  4. Hangers, Clips and Attachments First
  5. Temperature Before, During and After
  6. Ventilation and Drying
  7. Pre-Spray Checklist

Application

pp. 26-31
  1. Wet vs. Dry Mix Systems
  2. Passes and Build-Up
  3. Checking Wet Thickness While Spraying
  4. Tamping, Rolling and Surface Finish
  5. Sealers and Top Coats
  6. Visual Defects to Flag

Thickness Readings

pp. 32-41
  1. The Thickness Gauge and How to Read It
  2. How Many Readings on Floors, Roofs and Walls
  3. Fluted and Flat Deck: Where to Probe
  4. How Many Members to Test
  5. Wide-Flange Beams: 9 Readings at Each End
  6. Joists and Trusses: 7 Readings
  7. Wide-Flange Columns: 12 Readings
  8. HSS and Pipe Columns: At Least 4 Readings
  9. The 1/4-Inch Rules for Individual Readings
  10. Average Thickness, Worked Example

Density

pp. 42-47
  1. Why Density Matters
  2. How Often to Sample Density
  3. Cutting the Sample
  4. Drying the Sample to Constant Weight
  5. Density in pcf, Worked Example
  6. Low Density: What to Check Next

Bond Strength

pp. 48-53
  1. Cohesion vs. Adhesion
  2. Minimum Bond Strength by Building Height
  3. How Often to Test Bond Strength
  4. Running the Pull Test Step by Step
  5. Bond Strength in psf, Worked Example
  6. Bond Test on Primed or Painted Steel

Coatings, Repairs and Reports

pp. 54-61
  1. Mastic and Intumescent Coatings: What Changes
  2. Damage After Other Trades
  3. Patching: Same Material, Same Thickness
  4. Thin Spots: Respray and Re-Measure
  5. The Daily Log
  6. Writing a Nonconformance
  7. Test Report Sheets for Thickness, Density and Bond
  8. The Final Report

Open-Book Exam and Review

pp. 62-69
  1. How to Tab Your References
  2. Where to Find Each Answer
  3. Time Per Question: A Pacing Plan
  4. The Numbers Page
  5. Mix-Ups to Avoid: Beams, Joists, Columns
  6. Common Field Mistakes
  7. Full Inspection Checklist
  8. Glossary at a Glance

Who This Book Is For

You're studying for the certification

The whole inspection in the order you do it on site, one drawing per topic, so the code and the standards finally line up.

Your exam date is set

A tabbing guide, a pacing plan and a numbers page, so in an open-book exam you know where each answer lives.

You already inspect on site

Reading points on every shape, density and pull-test steps, and how to write it up, ready to print and keep in the truck.

Plus: 2 Free Books

Fireproofing Exam-Style Practice Questions
BONUS 1

Fireproofing Exam-Style Practice Questions

Practice with questions written like the real exam, each one with the answer and the page where you find it, so you learn to look things up fast before test day.

Field Quick-Reference Cards
BONUS 2

Field Quick-Reference Cards

One-page cards for thickness readings, density samples and bond checks that you can print and keep in your truck or clipboard on site.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I already inspect steel or concrete and need to add spray-applied fireproofing?

Yes. It doesn't explain what a beam is: it goes straight to the fireproofing inspection, in the order you do it on site, from the design listing to the final report.

Where does the content come from?

From the IBC Chapter 17 special inspection requirements, ASTM E605 (thickness and density), ASTM E736 (bond strength) and the AWCI technical manuals. Section numbers can shift between IBC editions, so each page names the requirement by what it checks: you can find it in the edition your exam or jurisdiction uses. Everything is explained with our own drawings, not copied from the standards.

Is it official material?

No. It's an independent illustrated study guide. It doesn't give you a certificate, a credential or exam credit: the certification only comes from passing the exam. It is not affiliated with or endorsed by ICC, ASTM, AWCI, UL or any exam body.

It's open book. Why do I need this if I already have the code and the standards?

Because open book only helps if you know where to look. This book doesn't replace your references: you still bring the code and the standards. It shows each topic as a drawing and tells you where its answer lives, with a tabbing guide and a pacing plan. It isn't a course and doesn't replace formal training or field experience.

Are the practice questions the ones on the exam?

No. They're written for this book in the style of the exam, each with the answer and where to find it. They are not official exam questions.

When and how do I get it?

PDF by email, sent to the address you enter at checkout. The 2 bonus books come with it.

Do I have to pay every month?

No. It's a one-time payment. No subscription.

Can I have it on paper?

Yes. It's a printable PDF: print the whole book or just the pages you want on site.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

US$ 27US$ 63
Get the book · US$ 27

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Fire Alarm Systems Illustrated

A 58-page illustrated guide for the NICET Fire Alarm Systems Level I and II exams. Every device, circuit and…

From US$ 27 US$ 63

Fire Inspector Exam Illustrated

The Fire Inspector I material, one topic per illustrated page: occupancy groups, means of egress, fire protection…

From US$ 27 US$ 63

Fire Sprinkler Systems Illustrated

Fire sprinkler systems explained one topic per page, every part drawn: how a head operates, wet, dry, pre-action and…

From US$ 27 US$ 63

Fire Extinguisher Tech Illustrated

Portable fire extinguisher service, drawn one topic per page: fire classes A, B, C, D and K, extinguisher types, parts…

From US$ 27 US$ 63

Fire Plans Examiner Illustrated

Fire plans examiner prep, drawn one topic per page: occupancy classification, construction types, occupant load with…

From US$ 27 US$ 63