Study in Pictures🌐 English (South Africa)
Wireman's Licence Illustrated

Digital book in PDF · read it on your phone or print it

Wireman's Licence Illustrated

Earthing, the main earth terminal, the DB, the 30 mA earth leakage rule, cable sizing, voltage drop, bathroom zones, the CoC test sequence and solar. Each topic has its own page: the drawing first, then what you need to remember.

  • 64 illustrated pages
  • English
  • 30-day guarantee
R399R999
Get the book · R399

Price shown for: South Africa. In other countries, the checkout shows the price that applies there.

About this book

What it is

Earthing, the main earth terminal, the DB, the 30 mA earth leakage rule, cable sizing, voltage drop, bathroom zones, the CoC test sequence and solar. Each topic has its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're studying the Installation Rules
  • Paper 1 and Paper 2 are close
  • You already wire and test on site
What it covers
  1. The Licence, the Law and the Code
  2. Supply, Earthing and Bonding
  3. Distribution Boards and Protection
  4. Cables, Sizing and Voltage Drop
  5. Circuits, Points and Special Locations
  6. The CoC Inspection and Test Sequence
  7. Solar and Embedded Generation
  8. Exam Review
Language
English (South Africa)
Pages
64
Format
Digital book in PDF · read it on your phone or print it
Price
R399 (South Africa)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

Discrimination: the device nearest the fault trips, the rest stays on.
Discrimination: the device nearest the fault trips, the rest stays on.
Ambient temperature, grouping and insulation: the three derating factors, multiplied
Ambient temperature, grouping and insulation: the three derating factors, multiplied
20 A × 30 m = 600 A·m → the cable needs 19,1 mV/A/m or less
20 A × 30 m = 600 A·m → the cable needs 19,1 mV/A/m or less
Earth leakage trip test: no trip at 50 % of IΔn, must trip at 100 %
Earth leakage trip test: no trip at 50 % of IΔn, must trip at 100 %
Safe isolation: 5 frames, prove–test–prove, before any supply-off test
Safe isolation: 5 frames, prove–test–prove, before any supply-off test
Test 2: insulation resistance at least 500 V d.c., minimum 1,0 MΩ
Test 2: insulation resistance at least 500 V d.c., minimum 1,0 MΩ
Test 4: earth electrode resistance per SANS 10199, required with alternative supplies
Test 4: earth electrode resistance per SANS 10199, required with alternative supplies
Installation Rules: two papers, at least 50% on each, prepared one part per week.
Installation Rules: two papers, at least 50% on each, prepared one part per week.

Take a Look at the 8 Parts and 60 Topics

The Licence, the Law and the Code

pp. 5-10
  1. From assistant to signing your own CoC
  2. Who is responsible for what
  3. What a CoC really is
  4. How SANS 10142-1 is organised
  5. Shall, should and may
  6. Finding a clause in under a minute

Supply, Earthing and Bonding

pp. 11-19
  1. The supply: 230 V, 400 V, 50 Hz
  2. Earthing systems: TN-C-S and TT
  3. Conductor colours, old and new
  4. The main earth terminal
  5. The earth electrode
  6. Sizing the earth conductor
  7. Bonding metal pipes and the geyser
  8. Exposed versus extraneous conductive parts
  9. Earth continuity throughout

Distribution Boards and Protection

pp. 20-27
  1. Inside a domestic DB
  2. The main switch and isolation
  3. Circuit breakers: rating and curve
  4. Earth leakage: the 30 mA rule
  5. Discrimination between devices
  6. Prospective fault current and breaking capacity
  7. DB labelling and notices
  8. Where a DB may and may not go

Cables, Sizing and Voltage Drop

pp. 28-36
  1. Choosing the cable type
  2. Current-carrying capacity
  3. Derating factors
  4. The sizing sequence
  5. Voltage drop: the 5% limit
  6. Voltage drop, worked example 1
  7. Voltage drop, worked example 2
  8. Conduit and trunking
  9. Underground cables

Circuits, Points and Special Locations

pp. 37-44
  1. Lighting circuits
  2. Socket-outlet circuits
  3. The geyser circuit
  4. Stove and fixed appliances
  5. Bathrooms: the zones
  6. Swimming pools and outdoor points
  7. Garages and outbuildings
  8. Alterations and additions

The CoC Inspection and Test Sequence

pp. 45-55
  1. The test sequence at a glance
  2. Safe isolation before testing
  3. Visual inspection checklist
  4. Test 1: continuity of protective conductors
  5. Test 2: insulation resistance
  6. Test 3: polarity
  7. Test 4: earth electrode resistance
  8. Test 5: earth loop impedance
  9. Test 6: earth leakage operation
  10. Functional checks and the final walk
  11. Filling in the test report

Solar and Embedded Generation

pp. 56-59
  1. SANS 10142-1-2 in one page
  2. The grid-tied inverter installation
  3. Labels and isolation for two supplies
  4. Registration with the supplier

Exam Review

pp. 60-64
  1. Paper 1 and Paper 2: how to prepare
  2. The numbers to have at hand
  3. Terms the exam mixes up
  4. The test sequence from memory
  5. Exam-day checklist

Who This Book Is For

You're studying the Installation Rules

Every clause you need comes with a drawing and the clause number to look up, so the code stops being a pile of tables and starts making sense.

Paper 1 and Paper 2 are close

The exam review puts the numbers to have at hand, the terms that get mixed up and the test sequence on a few pages you can go over the night before.

You already wire and test on site

Print the test pages and keep them in the van: the order, where each lead goes and the value each test has to give.

Plus: 2 Free Books

Installation Rules Practice Book
BONUS 1

Installation Rules Practice Book

Exam-style questions on the wiring code with the answer and the clause to look up, so you practise finding the rule fast before Paper 1 and Paper 2.

The 15 Most Common Wiring Mistakes
BONUS 2

The 15 Most Common Wiring Mistakes

Each mistake drawn wrong and then right, from a broken earth continuity to an unlabelled DB, so you spot it on site before the inspection does.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've been wiring for years but never written the Installation Rules?

Yes. It doesn't explain what a plug is: it goes straight to the clauses, the values and the test sequence the exam asks about, with a drawing for each one.

Where does the content come from?

From South African sources only: SANS 10142-1 and SANS 10142-1-2 for embedded generation, in the editions named on the first page of the book, and the Electrical Installation Regulations, 2009, under the Occupational Health and Safety Act 85 of 1993. It's written for the Installation Rules exam in South Africa: 230/400 V, the CoC, the DB and the test sequence as SANS 10142-1 sets them out. It isn't a book from another country. Everything is explained in our own words and drawings, and each page tells you which clause to look up. It doesn't reproduce the code's text or tables, so keep your own copy of SANS 10142-1.

Is it official material?

No. It's an independent study book. It isn't issued or endorsed by the SABS, the Department of Employment and Labour, any SETA or any exam centre.

Does it give me a licence, a registration or a certificate?

No. It's a study book to prepare for the Installation Rules exam and revise the code and the tests. It doesn't give you a licence, a registration or a certificate, and it doesn't replace accredited training or practical experience. You register with the Department of Employment and Labour once you meet its requirements.

Are the practice questions the ones from the exam?

No. They're written for this book in the style of the exam, with the answer and the clause to look up. They are not official exam questions.

When and how do I get it?

The book and the 2 free books come as a PDF by email, to the address you enter at checkout.

Do I have to pay every month?

No. It's a one-off payment. No subscription.

Can I have it on paper?

Yes. It's a PDF you can print at home or at a print shop, all of it or just the pages you want on site.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

R399R999
Get the book · R399

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Home Generator Illustrated

Know what your generator can really run, how many litres you need for each power cut and where to place it so the fumes…

From R399 R999