Study in Pictures🌐 English (United States)
Traffic Signal Tech Illustrated

Digital book in PDF · read it on your phone or print it

Traffic Signal Tech Illustrated

From the open cabinet to the yellow formula and the 5-step troubleshooting order. Every topic gets its own page: the drawing first, then the numbers you need to remember.

  • 64 illustrated pages
  • English
  • 30-day guarantee
US$ 27US$ 63
Get the book · US$ 27

Price shown for: United States. In other countries, the checkout shows the price that applies there.

About this book

What it is

From the open cabinet to the yellow formula and the 5-step troubleshooting order. Every topic gets its own page: the drawing first, then the numbers you need to remember.

Who This Book Is For
  • You're new to the signal shop
  • Your Level I exam is on the calendar
  • You already work signals
What it covers
  1. The Intersection as One Map
  2. Electricity and Safety in the Signal Shop
  3. Inside the Controller Cabinet
  4. Phases, Rings and Barriers
  5. Signal Timing
  6. Detection and Pedestrians
  7. Troubleshooting in 5 Steps
  8. Before the Exam
Language
English (United States)
Pages
64
Format
Digital book in PDF · read it on your phone or print it
Price
US$ 27 (United States)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

Flashing yellow arrow = permissive: yield to pedestrians and oncoming traffic
Flashing yellow arrow = permissive: yield to pedestrians and oncoming traffic
The open cabinet, part by part: controller, MMU, load bay, detectors, flasher, relays and more.
The open cabinet, part by part: controller, MMU, load bay, detectors, flasher, relays and more.
Phase, interval and cycle on one timeline bar: green, yellow change, red clearance.
Phase, interval and cycle on one timeline bar: green, yellow change, red clearance.
Y = t + 1.47v / (2a + 64.4g), with typical ITE values t = 1.0 s and a = 10 ft/s²
Y = t + 1.47v / (2a + 64.4g), with typical ITE values t = 1.0 s and a = 10 ft/s²
Preemption order, plus the rule: yellow and red clearance are never cut
Preemption order, plus the rule: yellow and red clearance are never cut
Safe → Read → Power → Swap → Restore: one full cycle watched before you leave.
Safe → Read → Power → Swap → Restore: one full cycle watched before you leave.
Reset before recording, tape-only splices, untagged parts, old 4.0 ft/s: wrong vs. right.
Reset before recording, tape-only splices, untagged parts, old 4.0 ft/s: wrong vs. right.
Read by part, practice test, mistakes cards, numbers page daily in the last week.
Read by part, practice test, mistakes cards, numbers page daily in the last week.

Take a Look at the 8 Parts and 60 Topics

The Intersection as One Map

pp. 5-11
  1. The Whole Intersection on One Drawing
  2. Mast Arm vs. Span Wire
  3. Anatomy of a Signal Head
  4. How Many Faces an Approach Needs
  5. Left-Turn Displays
  6. Pedestrian Signal Heads
  7. Underground: Conduit, Pull Boxes, Home Runs

Electricity and Safety in the Signal Shop

pp. 12-18
  1. Ohm's Law with a Signal Example
  2. The 120/240 V Service
  3. Using the Multimeter Right
  4. Grounding and Bonding
  5. AC and DC Inside the Cabinet
  6. Working in the Street
  7. Electrical Safety at the Cabinet

Inside the Controller Cabinet

pp. 19-27
  1. The Cabinet Opened, Part by Part
  2. Cabinet Types: TS 1, TS 2, 332, ATC
  3. The Power Panel
  4. What the Controller Actually Does
  5. Load Switches
  6. Flasher and Flash Transfer Relays
  7. Conflict Monitor / MMU
  8. The Program Card
  9. Police Panel and Field Terminals

Phases, Rings and Barriers

pp. 28-34
  1. What a Phase Is
  2. NEMA 8-Phase Numbering
  3. The Dual-Ring Diagram
  4. The Barrier
  5. Lead, Lag and Lead-Lag Left Turns
  6. Overlaps
  7. Reading a Phase Diagram on the Plan

Signal Timing

pp. 35-42
  1. The Intervals in Order
  2. Pretimed, Semi-Actuated, Fully Actuated
  3. The Yellow Change Formula
  4. Yellow, Worked Step by Step
  5. All-Red Clearance, Worked
  6. Pedestrian Timing
  7. Coordination: Cycle, Split, Offset
  8. Preemption and Priority

Detection and Pedestrians

pp. 43-50
  1. How an Inductive Loop Works
  2. Loop Layouts
  3. Sawcut and Loop Install
  4. Lead-In and Splice
  5. Detector Amplifier Settings
  6. Testing a Loop
  7. Video, Radar and Microwave
  8. Pushbuttons and Accessible Pedestrian Signals

Troubleshooting in 5 Steps

pp. 51-58
  1. The 5-Step Order
  2. Step 1: Arriving at a Dark or Flashing Intersection
  3. Step 2: Reading the Monitor Before Reset
  4. Fault: Dark Signal
  5. Fault: Intersection in Flash
  6. Fault: Stuck Phase
  7. Fault: One Indication Out
  8. Fault: Detector Not Calling or Always Calling

Before the Exam

pp. 59-64
  1. The Numbers on One Page
  2. Terms That Get Mixed Up
  3. Signal Indications and What They Mean
  4. Common Signal Shop Mistakes
  5. Cabinet Visit Checklist
  6. Your Review Plan to Exam Day

Who This Book Is For

You're new to the signal shop

You see the whole intersection and the cabinet as one map, so the parts stop being a list of names.

Your Level I exam is on the calendar

You review every topic with a drawing and a box of numbers, and finish with all the numbers on one page.

You already work signals

You keep the 5-step troubleshooting order and the cabinet visit checklist printed in the truck.

Plus: 2 Free Books

Signal Tech Practice Test: Exam-Style Questions with Explained Answers
BONUS 1

Signal Tech Practice Test: Exam-Style Questions with Explained Answers

Practice every topic of the Level I outline with exam-style questions, and see in one line why each answer is right or wrong.

The 15 Most Common Signal Shop Mistakes: Before/After Cards
BONUS 2

The 15 Most Common Signal Shop Mistakes: Before/After Cards

Review the errors new techs make most often, from loop splices to flash transfer, each one drawn wrong and right on the same card.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I work in public works or I'm an electrician moving into the signal shop?

Yes. It starts from the whole intersection and builds up to timing and troubleshooting. If you already do electrical work, Part II is a quick review and the rest is signal-specific: phases, rings, timing, detection.

Is it for the current IMSA Level I exam, and is it written for the US?

It's checked against the MUTCD 11th Edition (FHWA), NFPA 70 National Electrical Code, ITE practice for change and clearance intervals, and the topics in the IMSA Traffic Signal Level I study material. Some states use their own MUTCD or a state supplement (California and Texas, for example), and agencies adopt different NEC editions: always confirm local values with your agency.

Is it official material?

No. It's an independent study book, not published, affiliated with or endorsed by IMSA, NFPA or FHWA. It doesn't give you a certificate or count as course hours: your IMSA certification comes from IMSA when you pass their exam. The book is for studying and reviewing before that.

Does it replace the course or on-the-job training?

No. It helps you study and review. It doesn't replace IMSA training, your agency's procedures or supervised field work.

Are the practice questions the ones on the exam?

No. They're written for this book, following the exam topics, and they aren't official questions from any exam.

When and how do I get it?

As a PDF by email, sent to the address you enter at checkout. The 2 bonus books come the same way.

Do I have to pay every month?

No. It's a one-time payment.

Can I have it on paper?

It comes as a PDF by email, not as a printed book. The PDF is printable: print the whole book or just the pages you need, like the 5-step order and the cabinet checklist, and keep them in the truck.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

US$ 27US$ 63
Get the book · US$ 27

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Marine Electrical Illustrated

An illustrated PDF book on boat electrical systems for marine techs: Ohm's law with worked examples, battery banks…

From US$ 27 US$ 63

Lightning Protection Illustrated

Lightning protection explained one topic per page, every concept drawn: air terminals, conductors, grounding, bonding…

From US$ 27 US$ 63

EV Charger Installer Illustrated

EV charger installation explained one topic per page: charging levels, J1772, CCS and NACS connectors, the 125%…

From US$ 27 US$ 63

Generator Technician Illustrated

Understand standby and prime power generators as one path from fuel to the load: engine, alternator, wye and delta…

From US$ 27 US$ 63

Sign Electrician Illustrated

Sign Electrician Illustrated is a one-topic-per-page illustrated PDF for sign shop technicians and electricians…

From US$ 27 US$ 63

Journeyman Lineman Illustrated

Overhead and underground line work for the journeyman lineman exam, one topic per page with a big drawing: transformer…

From US$ 27 US$ 63

Home Generator Illustrated

Know what your generator can run, where it goes outside and how to start, refuel and shut it down during a power…

From US$ 27 US$ 63