Study in Pictures🌐 English (United States)
Work Zone Traffic Control Illustrated

Digital book in PDF · read it on your phone or print it

Work Zone Traffic Control Illustrated

The 4 areas, taper length, sign spacing, cone spacing, flagging, typical layouts and night work. Every topic has its own page: the drawing first, then what you need to remember.

  • 69 illustrated pages
  • English
  • 30-day guarantee
US$ 27US$ 63
Get the book · US$ 27

Price shown for: United States. In other countries, the checkout shows the price that applies there.

About this book

What it is

The 4 areas, taper length, sign spacing, cone spacing, flagging, typical layouts and night work. Every topic has its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're studying for your traffic control technician certification
  • Your certification or renewal is coming up
  • You already run a crew on the road
What it covers
  1. Before the First Cone
  2. Work Zone Areas
  3. Taper Math
  4. Signs: Sequence and Spacing
  5. Channelizing Devices and Lights
  6. Flagging
  7. Typical Layouts
  8. Exam Review and Field Check
Language
English (United States)
Pages
69
Format
Digital book in PDF · read it on your phone or print it
Price
US$ 27 (United States)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

One topic per page, top view, traffic left to right, based on MUTCD Part 6 (11th Ed., Rev. 1)
One topic per page, top view, traffic left to right, based on MUTCD Part 6 (11th Ed., Rev. 1)
Activity area, MUTCD 6B.06: work space + traffic space + buffer space
Activity area, MUTCD 6B.06: work space + traffic space + buffer space
Taper length: L = WS²/60 at 40 mph or less, L = W × S at 45 mph or more (MUTCD Table 6B-4).
Taper length: L = WS²/60 at 40 mph or less, L = W × S at 45 mph or more (MUTCD Table 6B-4).
Section 6B.01: reductions of 10 mph or less; more only with restrictive features.
Section 6B.01: reductions of 10 mph or less; more only with restrictive features.
Panels 8–12 × 24 in; longitudinal devices never protect workers; positive protection per 23 CFR 630.1108.
Panels 8–12 × 24 in; longitudinal devices never protect workers; positive protection per 23 CFR 630.1108.
Flagger, flag transfer, pilot car, temporary signal or STOP/YIELD: the 5 methods of MUTCD Chapter 6E.
Flagger, flag transfer, pilot car, temporary signal or STOP/YIELD: the 5 methods of MUTCD Chapter 6E.
Pedestrian route: 60 in wide or 60 × 60 in passing spaces every 200 ft, detectable edge, no tape.
Pedestrian route: 60 in wide or 60 × 60 in passing spaces every 200 ft, detectable edge, no tape.
Section 6A.02 D: routine day and night inspections · unserviceable devices shall be replaced
Section 6A.02 D: routine day and night inspections · unserviceable devices shall be replaced

Take a Look at the 8 Parts and 65 Topics

Before the First Cone

pp. 5-11
  1. How to Use This Book (and What It Is Not)
  2. MUTCD Part 6 in One Page
  3. Standard, Guidance, Option, Support: The 4 Headings That Change the Answer
  4. The Fundamental Principles of TTC
  5. The TTC Plan and the Traffic Management Plan
  6. The 5 Work Duration Categories
  7. Work Location: Shoulder, Lane, Median, Intersection

Work Zone Areas

pp. 12-19
  1. The 4 Areas, Always in the Same Order
  2. Advance Warning Area
  3. Transition Area
  4. Activity Area: Work Space, Traffic Space, Buffer
  5. Longitudinal Buffer Space and Its Distances
  6. Lateral Buffer Space
  7. Termination Area
  8. Spot the 4 Areas: A Two-Lane Flagging Zone

Taper Math

pp. 20-27
  1. The Two Formulas: WS²/60 and WS
  2. Which Speed Is S?
  3. The 5 Types of Taper and Their Lengths
  4. Worked Example: 12-ft Lane at 55 mph
  5. Worked Example: 11-ft Lane at 35 mph
  6. Quick Taper Table by Speed
  7. Cones in the Taper: How Many and How Far Apart
  8. Closing Two Lanes: Taper, Tangent, Taper

Signs: Sequence and Spacing

pp. 28-35
  1. Sign Spacing: The A-B-C Table
  2. Reading A, B and C in the Right Direction
  3. Warning Signs: Orange, Black, Diamond
  4. Sign Mounting Height
  5. The Signs You Use Every Day
  6. Regulatory Signs in the Work Zone
  7. Work Zone Speed Reduction
  8. Changeable Message Signs and Arrow Boards

Channelizing Devices and Lights

pp. 36-43
  1. Spacing: 1 × S in Tapers, 2 × S in Tangents
  2. Cones
  3. Tubular Markers
  4. Drums
  5. Barricades Type 1, 2 and 3
  6. Vertical Panels, Longitudinal Devices and Barriers
  7. Warning Lights Type A, B and C
  8. High-Level Warning Devices and Shadow Vehicles

Flagging

pp. 44-51
  1. When a Flagger Is Needed
  2. The Flagger's Gear
  3. The STOP/SLOW Paddle
  4. 3 Signals: Stop, Proceed, Slow
  5. Where the Flagger Stands
  6. Flagger Sign Sequence
  7. Coordinating Two Flaggers
  8. Automated Flagger Assistance Devices (AFAD)

Typical Layouts

pp. 52-63
  1. Work Beyond the Shoulder
  2. Shoulder Work, Minor Encroachment
  3. Lane Closure on a Two-Lane Road with Flaggers
  4. Lane Closure on a Two-Lane Road, Low Volume, Yield Control
  5. Lane Closure on a Multilane Road
  6. Freeway Lane Closure
  7. Lane Shift
  8. Intersection Work
  9. Road Closure and Detour
  10. Mobile and Short-Duration Operations
  11. Sidewalk Closures and Pedestrian Routes
  12. Night Work

Exam Review and Field Check

pp. 64-69
  1. All the Numbers on One Page
  2. Setting Up and Taking Down in the Right Order
  3. Daily and Night Inspection
  4. Most Frequent Setup Mistakes
  5. Taper and Spacing Self-Test
  6. Check Your State Supplement

Who This Book Is For

You're studying for your traffic control technician certification

Every MUTCD Part 6 topic on one page, drawn from above, so the formulas and distances stay in the same order.

Your certification or renewal is coming up

The all-the-numbers page and the self-test show you what you still mix up, before test day.

You already run a crew on the road

Print it, keep it in the truck, and check a taper or a sign distance before the inspector does.

Plus: 2 Free Books

Work Zone Exam-Style Practice Questions
BONUS 1

Work Zone Exam-Style Practice Questions

Practice with exam-style questions on tapers, spacing, flagging and layouts, each with the answer and the page that explains it, so you find your weak spots before test day.

15 Common Work Zone Setup Mistakes: Before & After
BONUS 2

15 Common Work Zone Setup Mistakes: Before & After

See the most frequent setup mistakes drawn side by side with the correct layout, so you can spot a short taper or a missing sign at a glance.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've been setting up work zones for years?

Yes. It's not a beginner's book: it puts the MUTCD Part 6 numbers you already use on one page per topic, so you review them in the same order every time.

Where does the content come from?

From the MUTCD 11th Edition (FHWA), Part 6, plus 23 CFR Part 630 Subparts J and K and ANSI/ISEA 107. The values are checked against the current edition. Your state may have its own supplement, and the last page shows you how to check it.

Is this official material?

No. It's an independent study guide, not the official material of any certification course, state DOT or training provider.

Does it replace the certification course?

No. It doesn't give you a certificate, a card or course credit. It helps you study and review, but you still need the required course and exam, your employer's training and your state's rules.

Are the practice questions the ones on the exam?

No. They're written for this book in an exam style, each with the answer and the page that explains it. They aren't official exam questions.

When and how do I get it?

The book and the 2 bonus books come as PDFs by email, sent to the address you enter at checkout.

Do I have to pay every month?

No. It's a one-time payment.

Can I get it on paper?

Yes. It's a printable PDF: print it at home or at a print shop and keep it in the truck.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

US$ 27US$ 63
Get the book · US$ 27

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Workplace Safety Illustrated

Workplace safety explained one topic per page, with a drawing for every rule: the Focus Four, fall protection, ladders…

From US$ 27 US$ 63

Safety Professional Illustrated

Study for the ASP exam one topic per page: the hierarchy of controls, OSHA recordkeeping, lockout/tagout, confined…

From US$ 27 US$ 63