Study in Pictures🌐 English (United States)
Construction Safety Exam Illustrated

Digital book in PDF · read it on your phone or print it

Construction Safety Exam Illustrated

Fall protection, trenches, ladders and scaffolds, power lines, cranes, silica, noise, heat and the incidence rate math. Every topic gets its own page: the drawing first, then the numbers. Based on OSHA 29 CFR 1926 and the August 2024 exam blueprint.

  • 66 illustrated pages
  • English
  • 30-day guarantee
US$ 37US$ 87
Get the book · US$ 37

Price shown for: United States. In other countries, the checkout shows the price that applies there.

About this book

What it is

Fall protection, trenches, ladders and scaffolds, power lines, cranes, silica, noise, heat and the incidence rate math. Every topic gets its own page: the drawing first, then the numbers. Based on OSHA 29 CFR 1926 and the August 2024 exam blueprint.

Who This Book Is For
  • You're studying for the technician exam
  • Your exam date is close
  • You already work in safety
What it covers
  1. How the Exam and the Standard Work
  2. Programs, Records and Safety Math
  3. Fall Protection
  4. Ladders, Scaffolds and Aerial Lifts
  5. Trenching and Excavation
  6. Electrical, Cranes and Rigging
  7. Health Hazards: Silica, Noise, Heat and Chemicals
  8. Fire, Emergencies and Equipment
  9. Review and Exam Day
Language
English (United States)
Pages
66
Format
Digital book in PDF · read it on your phone or print it
Price
US$ 37 (United States)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

CHST exam: 200 questions, 4 hours, 4 domains mapped to the book's parts
CHST exam: 200 questions, 4 hours, 4 domains mapped to the book's parts
OSHA's 7 recommended program elements, drawn as one wall
OSHA's 7 recommended program elements, drawn as one wall
Prompt rescue or self-rescue required · hanging still can cause suspension trauma
Prompt rescue or self-rescue required · hanging still can cause suspension trauma
Stepladder: no top cap, no top step, spreader locked, 4× intended load.
Stepladder: no top cap, no top step, spreader locked, 4× intended load.
4 ft ladder within 25 ft · 5 ft protective system · over 20 ft designed by a PE
4 ft ladder within 25 ft · 5 ft protective system · over 20 ft designed by a PE
120 V, 15/20 A temporary receptacles: GFCI, or cords tested every 3 months
120 V, 15/20 A temporary receptacles: GFCI, or cords tested every 3 months
Silica: PEL 50 µg/m³ and action level 25 µg/m³, both as an 8-hour TWA
Silica: PEL 50 µg/m³ and action level 25 µg/m³, both as an 8-hour TWA
One 2A per 3,000 sq ft within 100 ft; 10B within 50 ft of flammables
One 2A per 3,000 sq ft within 100 ft; 10B within 50 ft of flammables

Take a Look at the 9 Parts and 62 Topics

How the Exam and the Standard Work

pp. 5-9
  1. What the Technician Exam Covers
  2. How to Read 29 CFR 1926 Without Getting Lost
  3. The 4-Step Page: Hazard, Control, Key Number, Worked Example
  4. The Hierarchy of Controls as a Ladder
  5. Competent Person vs. Qualified Person

Programs, Records and Safety Math

pp. 10-18
  1. The Written Safety Program in One Drawing
  2. What Gets Recorded on the 300 Log
  3. The 300, 300A and 301 Forms and Their Dates
  4. Reporting to OSHA: 8 Hours and 24 Hours
  5. Total Hours Worked: Where the Math Starts
  6. The Incidence Rate, Step by Step
  7. DART Rate: Same Formula, Different Cases
  8. Severity Rate and Lost Days
  9. Leading vs. Lagging Indicators and the EMR

Fall Protection

pp. 19-27
  1. The 6-Foot Rule in Construction
  2. Guardrails: The Three Numbers
  3. Holes and Covers
  4. The ABCs of a Personal Fall Arrest System
  5. The Arrest Numbers: 6, 3.5 and 1,800
  6. Fall Clearance: Do the Math Before You Tie Off
  7. Swing Fall: The Pendulum Hazard
  8. Low-Slope Roofs: Warning Lines and Monitors
  9. Fall Rescue and Suspension Trauma

Ladders, Scaffolds and Aerial Lifts

pp. 28-34
  1. When a Ladder or Stairway Is Required
  2. Extension Ladders: 4-to-1 and 3 Feet Above
  3. Stepladders: Top Cap and Top Step
  4. Scaffold Capacity: The 4-Times Rule
  5. Scaffold Platforms and Planks
  6. Scaffold Inspection and the 4-to-1 Tip Rule
  7. Aerial Lifts and Scissor Lifts

Trenching and Excavation

pp. 35-41
  1. The Trench Numbers: 4, 5 and 20
  2. Soil Types A, B and C
  3. Testing the Soil: Visual and Manual
  4. Sloping: The Angles in Cross Section
  5. Benching vs. Shoring vs. Shielding
  6. Spoil Piles, Equipment and Water
  7. Daily Trench Inspection

Electrical, Cranes and Rigging

pp. 42-49
  1. GFCI or Assured Grounding
  2. Cords, Tools and Damaged Insulation
  3. Overhead Power Lines: 10 Feet and 20 Feet
  4. Lockout/Tagout in Construction
  5. Crane Setup: Ground, Swing Radius and the Operator
  6. Signal Person and Hand Signals
  7. Sling Angles: Why 30 Degrees Doubles the Load
  8. Rigging Inspection: When a Sling Comes Out of Service

Health Hazards: Silica, Noise, Heat and Chemicals

pp. 50-57
  1. Silica: 50 and 25
  2. Silica Controls: Water, Vacuum and the Written Plan
  3. Noise: 90 dBA and the 5-Decibel Exchange
  4. Hearing Protection Math: NRR Derating
  5. Heat Illness: Water, Rest, Shade
  6. Respirators: APF, Fit Test, Medical
  7. Hazard Communication: Labels and the SDS
  8. Confined Spaces in Construction

Fire, Emergencies and Equipment

pp. 58-61
  1. Fire Extinguishers on the Jobsite
  2. Hot Work and the Fire Watch
  3. The Emergency Action Plan
  4. Heavy Equipment and Struck-By Hazards

Review and Exam Day

pp. 62-66
  1. All the Key Numbers on One Page
  2. Look-Alike Numbers You Must Not Mix Up
  3. The Safety Math in 3 Formulas
  4. How to Read a Multiple-Choice Question
  5. The Night Before and Exam Day Checklist

Who This Book Is For

You're studying for the technician exam

Every topic on the blueprint has its own drawn page, in the same 4 steps: hazard, control, key number, worked example. You study at night and it lines up with what you already see on site.

Your exam date is close

The review part puts every key number on one page, the look-alike numbers side by side and the safety math in 3 formulas. The night before, you go over those pages instead of the whole manual.

You already work in safety

Print the pages you need and keep them in the truck. When the super asks about a trench or a tie-off, the number is one page away.

Plus: 2 Free Books

Construction Safety Practice Questions: Exam-Style, With Explained Answers
BONUS 1

Construction Safety Practice Questions: Exam-Style, With Explained Answers

Test yourself in the exam's multiple-choice style and see why each right answer is right, so you know which pages to go back to.

15 Common Jobsite Safety Mistakes: Before and After
BONUS 2

15 Common Jobsite Safety Mistakes: Before and After

The most frequent mistakes on a jobsite walkthrough and on the exam, each one drawn wrong and then right, for a quick review the night before.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is this for me if I've been in the trades for years and haven't taken an exam in a long time?

Yes. It's built for people who already know the jobsite. Every page starts from a drawing of the site, and the incidence rate math is worked one step at a time, with no prior math assumed.

Where does the content come from?

From OSHA's construction standards (29 CFR 1926), OSHA recordkeeping (29 CFR 1904) and the current exam blueprint for the construction health and safety technician certification, in effect since August 2024. Key numbers are flagged so you can check them against the current official version.

Is this official material?

No. It's an independent study book. It isn't affiliated with or endorsed by OSHA, BCSP or any certifying body.

I already have my OSHA 30. Isn't this the same thing with drawings?

No. The OSHA 30 is jobsite training. This book is for the technician exam: the key numbers side by side, the 300 log and the incidence, DART and severity rate math worked step by step, and multiple-choice practice. It's a study and review book: it doesn't replace an OSHA 10 or 30 course, first aid training, the judgment of a competent person or the current text of the standards.

Are the practice questions the ones on the exam?

No. They're written for this book, in multiple-choice style, to help you practice. They aren't official exam questions.

When and how do I get it?

The book and the 2 bonus books arrive as PDFs by email, at the address you enter when you pay.

Is it a one-time payment? Do I get a certificate?

One-time payment, no subscription. It's a study book: it doesn't come with a certificate, training hours or CEUs. The certification comes only from passing the exam with the certifying body.

Can I have it on paper?

Yes. It's a PDF you can print at home or at a print shop, all of it or just the pages you want to keep in the truck.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

US$ 37US$ 87
Get the book · US$ 37

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Workplace Safety Illustrated

Workplace safety explained one topic per page, with a drawing for every rule: the Focus Four, fall protection, ladders…

From US$ 27 US$ 63

Safety Professional Illustrated

Study for the ASP exam one topic per page: the hierarchy of controls, OSHA recordkeeping, lockout/tagout, confined…

From US$ 27 US$ 63