Study in Pictures🌐 English (South Africa)
Fire Alarm Systems Illustrated

Digital book in PDF · read it on your phone or print it

Fire Alarm Systems Illustrated

Detector choice, the coverage circle, call points, sounders, zones, fire-resistant cable, standby batteries, commissioning and fault finding. Every topic has its own page: the drawing first, then what you need to remember.

  • 65 illustrated pages
  • English
  • 30-day guarantee
R399R999
Get the book · R399

Price shown for: South Africa. In other countries, the checkout shows the price that applies there.

About this book

What it is

Detector choice, the coverage circle, call points, sounders, zones, fire-resistant cable, standby batteries, commissioning and fault finding. Every topic has its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're studying for SAQCC Fire registration
  • Your assessment is coming up
  • You already work in fire detection
What it covers
  1. How a Fire Alarm System Thinks
  2. Choosing the Right Detector
  3. Spacing and Positioning
  4. Call Points, Sounders and Zones
  5. Cabling, Power and the Panel
  6. Design from the Brief
  7. Commissioning, Handover and Servicing
  8. Fault Finding and Revision
Language
English (South Africa)
Pages
65
Format
Digital book in PDF · read it on your phone or print it
Price
R399 (South Africa)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

Detector or call point → panel → sounders, beacons and outputs.
Detector or call point → panel → sounders, beacons and outputs.
Optical smoke detector: smoke scatters light onto the sensor · best on smouldering fires, slower on clean flaming fires
Optical smoke detector: smoke scatters light onto the sensor · best on smouldering fires, slower on clean flaming fires
Flat ceiling: 7.5 m radius for smoke, 5.3 m for heat
Flat ceiling: 7.5 m radius for smoke, 5.3 m for heat
Visual alarm devices: for noisy areas, toilets and people with hearing loss, alongside the sounders.
Visual alarm devices: for noisy areas, toilets and people with hearing loss, alongside the sounders.
Standard PH30 vs enhanced PH120 fire-resistant cable, and how to tell from the brief
Standard PH30 vs enhanced PH120 fire-resistant cable, and how to tell from the brief
Category, sleeping risk, evacuation, insurer and SANS 10400-T: five answers before the floor plan.
Category, sleeping risk, evacuation, insurer and SANS 10400-T: five answers before the floor plan.
Every device checked for address, zone text and panel response, using proper test equipment.
Every device checked for address, zone text and panel response, using proper test equipment.
Five steps, always in the same order: panel, log, isolate, measure, split in half.
Five steps, always in the same order: panel, log, isolate, measure, split in half.

Take a Look at the 8 Parts and 61 Topics

How a Fire Alarm System Thinks

pp. 5-11
  1. Detect, decide, warn: the system in one drawing
  2. What SANS 10139 covers, and what it doesn't
  3. Fire, smoke and heat: what a detector actually sees
  4. System categories: protecting life or protecting property
  5. Conventional, addressable and wireless side by side
  6. The panel front, read in the same order
  7. Who does what: designer, installer, commissioner, maintainer

Choosing the Right Detector

pp. 12-18
  1. Optical smoke detector: light scattered by smoke
  2. Heat detectors: fixed temperature or rate of rise
  3. Multi-sensor detectors: two senses, fewer false alarms
  4. Beam detectors for warehouses and atriums
  5. Aspirating systems: pipes that sample air
  6. Flame and CO detectors: when they make sense
  7. Picking the detector for each room: one decision table

Spacing and Positioning

pp. 19-28
  1. Coverage radius: the circle around every detector
  2. From radius to grid: spacing in square metres
  3. Corridors: the narrow-room exception
  4. Distance from the wall and from the corner
  5. Depth below the ceiling
  6. Ceiling height limits
  7. Air vents, fans and air conditioning
  8. Beams, ribs and deep downstand
  9. Pitched and sloping ceilings
  10. Voids above ceilings and below floors

Call Points, Sounders and Zones

pp. 29-36
  1. Manual call points: height and position
  2. Travel distance to a call point
  3. Sound levels: how loud is loud enough
  4. Placing sounders: more small ones beat one big one
  5. Visual alarm devices and hearing impairment
  6. Zones: area and search distance
  7. One storey per zone, and the small-building exception
  8. The zone chart beside the panel

Cabling, Power and the Panel

pp. 37-45
  1. Fire-resistant cable: standard or enhanced
  2. Supporting cables so they survive the fire
  3. Segregation and colour
  4. Loop wiring on addressable systems
  5. Radial circuits and end-of-line devices
  6. Mains supply to the panel
  7. Standby batteries: what they must keep running
  8. Battery calculation in ampere-hours, step by step
  9. Voltage drop on sounder circuits

Design from the Brief

pp. 46-51
  1. Reading the brief: category, occupancy, risk
  2. Variations: agreed, written and signed
  3. Full design in seven steps on a floor plan
  4. Interfaces: lifts, doors, air handling and suppression
  5. Cause and effect matrix
  6. Avoiding false alarms at design stage

Commissioning, Handover and Servicing

pp. 52-58
  1. Before commissioning: insulation and continuity tests
  2. Commissioning every device in the same order
  3. Checking sound levels on site
  4. Testing the cause and effect
  5. Certificates and documents at handover
  6. Weekly test and the logbook
  7. Periodic servicing

Fault Finding and Revision

pp. 59-65
  1. Fault finding method: the same five steps every time
  2. Open circuit on a conventional zone
  3. Short circuit and loop isolators
  4. Earth fault, step by step
  5. Unwanted alarms: finding the real cause
  6. The numbers to know by heart
  7. Most frequent mistakes on site and on paper

Who This Book Is For

You're studying for SAQCC Fire registration

Every rule you use on site becomes a drawing with the measurement marked, so the evening's study turns into pictures you can recall.

Your assessment is coming up

The calculations and the fault finding come in fixed steps, always in the same order, so you can explain what you do instead of going blank.

You already work in fire detection

A printable reference for the van: spacing, call point heights, cable and batteries at a glance, before you open the standard.

Plus: 2 Free Books

Fire Alarm Exam-Style Questions: Practice Book with Answers
BONUS 1

Fire Alarm Exam-Style Questions: Practice Book with Answers

Test yourself on detectors, spacing, zones, batteries and commissioning, with every answer explained so you know why, not just what.

Fire Alarm Quick Reference Cards
BONUS 2

Fire Alarm Quick Reference Cards

The distances, heights, sound levels and battery formula you look up most, on printable cards to revise in minutes or keep in the van.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've been installing for years and now need SAQCC Fire registration?

Yes. It isn't a beginner's book: it puts what you already do on site in order, one topic per page, from detector spacing to the Ah calculation and fault finding, so you can explain it to an assessor or a client. It's useful revision whether you're going for installer, commissioner or designer registration, or studying for the Fire Alarm Designer occupational certificate.

Where does the content come from?

It's written for South African work, around SANS 10139, SANS 10400-T and SANS 322 and the SAQCC Fire registration categories, in metric units. It isn't a UK or US book with other distances. Everything is explained in our own words and drawings: no text or tables from the standards are reproduced, so always check the current edition.

Is it official material?

No. It's independent study material, not issued or endorsed by SAQCC Fire, the SABS or any other body.

Does it replace the course or the standard?

No. It helps you study and revise, but it doesn't replace accredited training, supervised site work or the standard itself. It doesn't come with a certificate and it doesn't guarantee SAQCC Fire registration or passing an assessment.

Are the practice questions the ones in the exam?

No. They're written for this book to help you practise, and they aren't official questions from any exam or assessment.

When and how does it arrive?

As a PDF by email, to the address you enter at checkout, together with the 2 gift books.

Do I have to pay every month?

No. It's a one-off payment, with no subscription.

Is it a PDF or a printed book?

It's a PDF, sent by email. It's ready to print on A4, so you can keep it in the van or take it to site.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

R399R999
Get the book · R399

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic