Study in Pictures🌐 English (United States)
Water Softener Installer Illustrated

Digital book in PDF · read it on your phone or print it

Water Softener Installer Illustrated

Grains per gallon, reading a water test, softener sizing, salt settings, the regeneration cycle, the drain air gap, iron filters, RO and UV. Every topic gets its own page: the drawing first, then what you need to remember.

  • 65 illustrated pages
  • English
  • 30-day guarantee
US$ 27US$ 63
Get the book · US$ 27

Price shown for: United States. In other countries, the checkout shows the price that applies there.

About this book

What it is

Grains per gallon, reading a water test, softener sizing, salt settings, the regeneration cycle, the drain air gap, iron filters, RO and UV. Every topic gets its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're learning the trade
  • Your exam date is set
  • You already install and service
What it covers
  1. The Job and the License
  2. Reading a Water Test
  3. How a Softener Works
  4. Sizing and Salt Settings
  5. Installing a Softener
  6. Iron, Sulfur and Filters
  7. Reverse Osmosis and UV
  8. Troubleshooting and Exam Review
Language
English (United States)
Pages
65
Format
Digital book in PDF · read it on your phone or print it
Price
US$ 27 (United States)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

1 gpg = 17.1 mg/L as CaCO3 · 342 mg/L ÷ 17.1 = 20 gpg
1 gpg = 17.1 mg/L as CaCO3 · 342 mg/L ÷ 17.1 = 20 gpg
Two tanks, eight parts: control valve, resin bed, distributor tube, basket, brine well, float, brine line, drain
Two tanks, eight parts: control valve, resin bed, distributor tube, basket, brine well, float, brine line, drain
18 gpg + 1 ppm iron ≈ 22 to 23 gpg compensated hardness (example factor 4–5).
18 gpg + 1 ppm iron ≈ 22 to 23 gpg compensated hardness (example factor 4–5).
Air gap: at least 2× the pipe opening, never under 1 inch, measured to the flood level rim.
Air gap: at least 2× the pipe opening, never under 1 inch, measured to the flood level rim.
Sediment → iron → softener → carbon → UV, with RO on the kitchen branch, and why
Sediment → iron → softener → carbon → UV, with RO on the kitchen branch, and why
Below the manufacturer's minimum, RO production and rejection drop; over 80 psi, the IPC wants a PRV.
Below the manufacturer's minimum, RO production and rejection drop; over 80 psi, the IPC wants a PRV.
7 checks in order: bypass, salt, bridge, valve, brine draw, new test, resin
7 checks in order: bypass, salt, bridge, valve, brine draw, new test, resin
17.1 · 0.3 · 0.05 · 6.5–8.5 · 500 · 4.0 · 40 · 70% · 12 · 80
17.1 · 0.3 · 0.05 · 6.5–8.5 · 500 · 4.0 · 40 · 70% · 12 · 80

Take a Look at the 8 Parts and 61 Topics

The Job and the License

pp. 5-11
  1. What a Water Treatment Specialist Does in Texas
  2. Class I, II and III: What Each One Lets You Do
  3. How the Exam Is Built
  4. Renewal and Continuing Education
  5. Where Your Water Comes From
  6. The Hardness Map: Why Texas Water Scales
  7. The Words the Exam Uses That the Job Doesn't

Reading a Water Test

pp. 12-18
  1. Grains per Gallon vs mg/L
  2. Soft, Moderately Hard, Very Hard
  3. Iron and Manganese: The Stain Numbers
  4. pH: The Number That Changes Everything
  5. TDS, Chlorine and Chloramine
  6. Hydrogen Sulfide, Tannins and Bacteria
  7. From Test Result to System

How a Softener Works

pp. 19-26
  1. Ion Exchange in One Drawing
  2. The Parts in Cross-Section
  3. Tank Sizes and Resin Volume
  4. The Regeneration Cycle, Step by Step
  5. Backwash: Why It Lifts the Bed
  6. Brine Draw and the Injector
  7. Timer, Metered and Demand Control Valves
  8. Sodium vs Potassium Chloride

Sizing and Salt Settings

pp. 27-34
  1. Compensated Hardness: Add the Iron
  2. Daily Water Use
  3. Grains per Day
  4. Picking the Capacity
  5. Salt Dose vs Capacity
  6. Setting the Salt for a Real House
  7. Service Flow Rate and Pressure Drop
  8. Reserve Capacity on Metered Valves

Installing a Softener

pp. 35-42
  1. Choosing the Spot
  2. The Bypass Valve
  3. Inlet and Outlet: Don't Swap Them
  4. The Drain Line and the Air Gap
  5. Drain Line Length and Height
  6. Brine Tank Overflow
  7. Bonding and Grounding
  8. Start-Up in the Right Order

Iron, Sulfur and Filters

pp. 43-49
  1. Oxidize, Then Filter
  2. Air Injection Iron Filters
  3. Birm, Greensand and Catalytic Media
  4. Chlorine Feed and Contact Time
  5. Sediment and Carbon Filters
  6. Backwash Rates for Filters
  7. The Right Order in the Line

Reverse Osmosis and UV

pp. 50-57
  1. How an RO Membrane Works
  2. The RO System in Cross-Section
  3. Pressure: The Number RO Lives On
  4. The Storage Tank Precharge
  5. RO Drain Saddle and Air Gap Faucet
  6. RO Filter and Membrane Changes
  7. UV: Dose, Not Just a Lamp
  8. What UV Needs in Front of It

Troubleshooting and Exam Review

pp. 58-65
  1. "My Water Is Hard Again"
  2. Salt Bridge and Salt Mushing
  3. Water Running to Drain Nonstop
  4. Brine Tank Overflowing
  5. Low RO Flow and Bad Taste
  6. Sizing Calculation Drill
  7. The Most Asked Numbers on One Page
  8. Final Install Checklist

Who This Book Is For

You're learning the trade

You see every system drawn in the same order: what it removes, its parts, how to size it, how to install it and what to check when it fails.

Your exam date is set

You review grains, sizing, regeneration, RO and UV one page at a time, and you test yourself with questions that explain each answer.

You already install and service

You keep it printed in the truck: the 7 checks for hard water again, the air gap rule and the most asked numbers, ready when the customer asks.

Plus: 2 Free Books

Water Treatment Exam Practice: Questions with Worked Answers
BONUS 1

Water Treatment Exam Practice: Questions with Worked Answers

Test yourself on hardness, sizing, regeneration, RO and UV with exam-style questions, and see why each answer is right.

15 Common Install Mistakes, Before & After
BONUS 2

15 Common Install Mistakes, Before & After

See the drain, bypass, brine overflow and air gap mistakes side by side with the correct setup, so you spot them before the customer does.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've installed softeners for years but haven't taken an exam in a long time?

Yes. It doesn't teach you to hold a wrench. It shows the terms and numbers the exam uses, drawn, so they connect to the work you already do.

Where does the content come from?

From the TCEQ rules for Water Treatment Specialists in Texas (30 TAC Chapter 30), the EPA primary and secondary drinking water standards and the plumbing code adopted in Texas. It's written for the Texas license, not a generic national book. Rules can change, so before you register, check the current license classes and requirements on the TCEQ website.

Is it official material?

No. It's independent study material, not affiliated with or endorsed by the TCEQ or any other organization.

Does it replace the course or the training?

No. It doesn't replace the required training, hands-on experience, local code or manufacturer instructions, and it doesn't give you a certificate or training hours for the license. It helps you study and review.

Are the practice questions the ones from the exam?

No. They're written for this book to help you practice. They are not official questions from any exam.

When and how do I get it?

The book and the 2 bonus books arrive as PDFs by email, at the address you enter at checkout.

I'm not in Texas. Is it useful for me?

The water chemistry, sizing, installation and troubleshooting pages apply anywhere. The license classes, the exam structure and the rules are Texas (TCEQ). If you're licensed in another state, check its own requirements and your local plumbing code.

Can I have it on paper?

It comes as PDF by email, not as a printed book. The PDFs are ready to print at home or at a print shop, so you can keep a copy in the truck.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

US$ 27US$ 63
Get the book · US$ 27

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Pool & Spa Operator Illustrated

Pool chemistry, VGB entrapment safety and all the pool math for the Certified Pool & Spa Operator® course, explained in…

From US$ 27 US$ 63

Water Distribution Exam Illustrated

The water distribution D1/D2 exam, one topic per page: valves, hydrants, pressure and head, main disinfection, backflow…

From US$ 27 US$ 63

Backflow Tester Exam Illustrated

Prepare for your backflow prevention assembly tester exam with 63 illustrated pages, one topic per page. Hydraulics…

From US$ 27 US$ 63

Wastewater Operator Illustrated

Study for your state's wastewater treatment operator certification exam with an illustrated book: one topic per page…

From US$ 27 US$ 63

Pool Operator Illustrated

Get ready for your pool operator certification with one drawing per topic: the circulation system end to end, sand…

From US$ 27 US$ 63

Water Well Driller Illustrated

Review for your state water well driller or pump installer license exam with a book where every topic gets one page and…

From US$ 27 US$ 63