Study in Pictures🌐 English (United States)
Irrigation Design Illustrated

Digital book in PDF · read it on your phone or print it

Irrigation Design Illustrated

Site survey, static and dynamic pressure, head spacing, precipitation rate, zoning, pipe sizing, friction loss and run times. Each topic gets its own page: first the drawing, then what you need to remember.

  • 64 illustrated pages
  • English
  • 30-day guarantee
US$ 27US$ 63
Get the book · US$ 27

Price shown for: United States. In other countries, the checkout shows the price that applies there.

About this book

What it is

Site survey, static and dynamic pressure, head spacing, precipitation rate, zoning, pipe sizing, friction loss and run times. Each topic gets its own page: first the drawing, then what you need to remember.

Who This Book Is For
  • You're studying for the CID exam
  • Your exam date is close
  • You already design and install
What it covers
  1. The Design Sequence
  2. Site Survey & Water Supply
  3. Heads, Spacing & Precipitation
  4. Zoning
  5. Pipe Sizing & Friction Loss
  6. Water Need & Scheduling
  7. Drawing the Plan
  8. Review & Exam Practice
Language
English (United States)
Pages
64
Format
Digital book in PDF · read it on your phone or print it
Price
US$ 27 (United States)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

Pressure budget: static minus service line, meter, backflow, valve, pipe, fittings, ± elevation = last head.
Pressure budget: static minus service line, meter, backflow, valve, pipe, fittings, ± elevation = last head.
Square S × L vs triangular S × S × 0.866: area per head at a glance.
Square S × L vs triangular S × S × 0.866: area per head at a glance.
6 GPM at 25 ft: about 0.92 in/h square vs 1.07 in/h triangular.
6 GPM at 25 ft: about 0.92 in/h square vs 1.07 in/h triangular.
Four 2-gpm heads: segments carry 2, 4, 6 and 8 gpm back to the valve.
Four 2-gpm heads: segments carry 2, 4, 6 and 8 gpm back to the valve.
0.433 psi per foot: a head 12 ft uphill loses about 5.2 psi.
0.433 psi per foot: a head 12 ft uphill loses about 5.2 psi.
Run time = inches ÷ PR × 60 × SM, spray and rotor solved side by side.
Run time = inches ÷ PR × 60 × SM, spray and rotor solved side by side.
PR 96.3 × gpm ÷ (S × L) · V = 0.408 × gpm ÷ d² · 0.433 psi/ft · SM · run time
PR 96.3 × gpm ÷ (S × L) · V = 0.408 × gpm ÷ d² · 0.433 psi/ft · SM · run time
12 yes/no checks in design order: supply, hydraulics, pressure, run times, legend and controller chart
12 yes/no checks in design order: supply, hydraulics, pressure, run times, legend and controller chart

Take a Look at the 8 Parts and 60 Topics

The Design Sequence

pp. 5-9
  1. One order, every design
  2. What a finished irrigation plan contains
  3. The US units you'll use all day
  4. Five conversions to know cold
  5. How to solve a calculation on paper

Site Survey & Water Supply

pp. 10-18
  1. The base map: measure before you draw
  2. Slopes, elevation and low spots
  3. Soil texture and intake rate
  4. Static pressure: the reading with no water moving
  5. Dynamic pressure: what's left with water flowing
  6. Meter size and service line
  7. Maximum available flow
  8. The pressure budget
  9. Backflow prevention at the point of connection

Heads, Spacing & Precipitation

pp. 19-27
  1. Sprays, rotors, bubblers, drip
  2. Reading a manufacturer's nozzle chart
  3. Operating pressure: too low, too high
  4. Head-to-head coverage
  5. Square vs triangular spacing
  6. Wind and spacing
  7. Matched precipitation
  8. Precipitation rate, square spacing
  9. Precipitation rate, triangular spacing

Zoning

pp. 28-33
  1. Hydrozones: group by water need
  2. Never mix sprays and rotors
  3. Sun, shade and slope as zone breaks
  4. Zone flow limit
  5. Placing valves and manifolds
  6. Drip zones

Pipe Sizing & Friction Loss

pp. 34-43
  1. Mainline vs laterals
  2. Pipe types and pressure classes
  3. Velocity in the pipe
  4. Friction loss: water rubbing the pipe
  5. Reading a friction loss chart
  6. Hazen-Williams in plain steps
  7. Sizing a lateral section by section
  8. Sizing the mainline
  9. Fittings, valves and components
  10. Elevation: gain or lose 0.433 psi per foot

Water Need & Scheduling

pp. 44-53
  1. Reference evapotranspiration (ETo)
  2. Plant factor and landscape coefficient
  3. Root zone and soil water holding
  4. Management allowable depletion
  5. Distribution uniformity (DU)
  6. Scheduling multiplier
  7. Run time in minutes
  8. Cycle and soak
  9. Controllers and sensors
  10. The landscape water budget

Drawing the Plan

pp. 54-58
  1. Scale and title block
  2. Symbols and legend
  3. Labeling zones, pipe and flow
  4. Installation details and notes
  5. Handing over the schedule

Review & Exam Practice

pp. 59-64
  1. A full design, start to finish
  2. Pressure check at the farthest head
  3. Most frequent calculation mistakes
  4. Most frequent layout mistakes
  5. The formula page
  6. Final checklist before you submit a plan

Who This Book Is For

You're studying for the CID exam

Every calculation sits on the step it belongs to, so the formulas stop floating around. You study in the same order you'd design.

Your exam date is close

The formula page, the practice tests and the quick cards let you review in short sessions and find what you still miss before exam day.

You already design and install

You keep it in the truck or on the desk and check a pressure budget or a run time in a minute. And if you draw the planting plan, it walks you through the irrigation plan that goes with it, with numbers you can justify to a client or an inspector.

Plus: 2 Free Books

Irrigation Design Practice Tests
BONUS 1

Irrigation Design Practice Tests

Exam-style questions with every answer explained step by step, so you find out what you still miss before exam day, not during it.

Irrigation Formulas Quick Cards
BONUS 2

Irrigation Formulas Quick Cards

Precipitation rate, GPM, friction loss, velocity and run-time formulas on printable cards, each with its units and a mini example, to review in five minutes.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've been installing irrigation for 20 years?

Yes. It doesn't teach you how to trench. It puts the design math in order (pressure, precipitation, pipe sizing, run times) in US units: psi, GPM, feet and inches per hour. So you can do on paper what you already do in the field.

Where does the content come from?

From the content outline the Irrigation Association currently publishes for the Certified Irrigation Designer exam, checked topic by topic, plus US EPA WaterSense guidance on water budgets and controllers. All in US units: psi, GPM, feet, inches per hour. Backflow rules and local codes vary by state: always check yours.

Is this official material?

No. It's an independent study companion. It doesn't give you a certificate or continuing education credits: the certification comes only from passing the exam. It is not affiliated with, endorsed by or approved by the Irrigation Association or the EPA.

Does it replace a course or formal training?

No. It's for studying and reviewing. It doesn't replace training, field experience, manufacturer data or your local code.

Are the practice questions the ones on the exam?

No. They're written for this book, on the topics in the exam outline, with every answer explained step by step. They are not official exam questions.

When and how do I get it?

The book and the 2 bonus books come as PDF by email, to the address you enter at checkout.

Do I have to pay every month?

No. It's a one-time payment. No subscription.

Can I have it on paper?

Yes. Print the PDF at home or at a print shop and keep it in the truck.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

US$ 27US$ 63
Get the book · US$ 27

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Irrigation Technician Illustrated

Landscape irrigation explained one topic per page, every page a drawing: system parts from the point of connection…

From US$ 27 US$ 63

Irrigation Auditor Illustrated

An illustrated irrigation auditor study book: site inspection, catch-can layout, distribution uniformity, precipitation…

From US$ 27 US$ 63

Landscape Technician Illustrated

An independent illustrated study guide for the Landscape Industry Certified Technician – Exterior exam: one topic per…

From US$ 27 US$ 63

Irrigation Contractor Illustrated

An illustrated irrigation book, one topic per page: the water path from source to head, pressure and flow, friction…

From US$ 27 US$ 63