Study in Pictures🌐 English (New Zealand)
NZ Gasfitter Exam Illustrated

Digital book in PDF · read it on your phone or print it

NZ Gasfitter Exam Illustrated

Pipe sizing, pressure testing, purging, flues and terminals, ventilation, LPG cylinders and commissioning. Every topic has its own page: the drawing first, then what you need to remember.

  • 68 illustrated pages
  • English
  • 30-day guarantee
NZ$ 39NZ$ 89
Get the book · NZ$ 39

Price shown for: New Zealand. In other countries, the checkout shows the price that applies there.

About this book

What it is

Pipe sizing, pressure testing, purging, flues and terminals, ventilation, LPG cylinders and commissioning. Every topic has its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're working under supervision
  • Your registration exam is booked
  • You're going for Certifying Gasfitter
What it covers
  1. The Rules and the Exam
  2. Gas Basics That Explain Everything
  3. The Installation, From Supply to Appliance
  4. Pipe Sizing, Step by Step
  5. Pressure Testing and Purging
  6. Flues and Terminals
  7. Ventilation and Appliance Location
  8. LPG Installations
  9. Commissioning, Certification and Exam Revision
Language
English (New Zealand)
Pages
68
Format
Digital book in PDF · read it on your phone or print it
Price
NZ$ 39 (New Zealand)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

Same layout on every page: one drawing, short cards and one key point to remember
Same layout on every page: one drawing, short cards and one key point to remember
Natural gas is lighter than air; LPG is heavier and pools at the lowest point.
Natural gas is lighter than air; LPG is heavier and pools at the lowest point.
Brazed, threaded, press and electrofusion joints, each with its key prep step
Brazed, threaded, press and electrofusion joints, each with its key prep step
Natural gas: at least 1.13 kPa at the appliance inlet with all appliances on (G11 Acceptable Solution).
Natural gas: at least 1.13 kPa at the appliance inlet with all appliances on (G11 Acceptable Solution).
Strength vs tightness: the Appendix E leak test is 7 kPa or 1.5× operating pressure, whichever is greater (2013, Amdt 1–4)
Strength vs tightness: the Appendix E leak test is 7 kPa or 1.5× operating pressure, whichever is greater (2013, Amdt 1–4)
Draught diverter spillage test: smoke drawn in passes, smoke pushed out fails
Draught diverter spillage test: smoke drawn in passes, smoke pushed out fails
Combustion air, dilution air and draught: one drawing, three jobs, one reason flues spill.
Combustion air, dilution air and draught: one drawing, three jobs, one reason flues spill.
Valve, relief valve, collar and vapour space: why LPG cylinders are never filled full
Valve, relief valve, collar and vapour space: why LPG cylinders are never filled full

Take a Look at the 9 Parts and 64 Topics

The Rules and the Exam

pp. 5-10
  1. How to Use This Book: One Topic, One Page, Same Order
  2. Who Does What: Trainee, Gasfitter, Certifying Gasfitter
  3. The Paperwork Pyramid: Act, Regulations, Standard
  4. Low-Risk, General and High-Risk Gasfitting
  5. How AS/NZS 5601.1 Is Organised
  6. Inside the Two Exams: What Each One Tests

Gas Basics That Explain Everything

pp. 11-17
  1. Natural Gas vs LPG, Side by Side
  2. The Fire Triangle and Flammability Limits
  3. Complete vs Incomplete Combustion
  4. Carbon Monoxide: How It Harms
  5. Pressure Units: kPa, Pa and Gauge Pressure
  6. Heat Input: MJ/h and kW
  7. Specific Gravity and Wobbe Index, Made Simple

The Installation, From Supply to Appliance

pp. 18-25
  1. The Whole Installation in One Drawing
  2. Meters and the Point of Supply
  3. Regulators: What They Do and Where They Go
  4. Approved Pipe Materials
  5. Joints That Pass Inspection
  6. Isolation Valves: Where You Need One
  7. Pipe Support, Protection and Concealment
  8. Flexible Connections and Appliance Hook-Up

Pipe Sizing, Step by Step

pp. 26-32
  1. Why Pipe Size Matters: Pressure Drop
  2. The 6-Step Pipe Sizing Method
  3. Step 1-2: Loads and the Sketch
  4. Step 3-4: Longest Run and Fittings Allowance
  5. Step 5-6: Reading the Sizing Table
  6. Worked Example: Natural Gas House
  7. Worked Example: LPG Installation

Pressure Testing and Purging

pp. 33-40
  1. Why We Test: Strength vs Tightness
  2. Your Test Kit
  3. The Pressure Test in 7 Steps
  4. Reading the Gauge: Pass or Fail
  5. Finding a Leak
  6. Testing Existing Installations
  7. Purging: Air Out, Gas In
  8. Purging Large Pipes and Safe Discharge

Flues and Terminals

pp. 41-48
  1. How a Flue Works: Draught
  2. Appliance Types: Open-Flued, Room-Sealed, Flueless
  3. The Draught Diverter and Spillage
  4. Flue Materials, Size and Route
  5. Terminals in Elevation: What Is Measured
  6. Terminals in Plan View
  7. Roof Terminals and Cowls
  8. Checking a Terminal in 5 Steps

Ventilation and Appliance Location

pp. 49-54
  1. Why Appliances Need Air
  2. High and Low Ventilation Openings
  3. Calculating Ventilation: The Method
  4. Appliances in Enclosures and Cupboards
  5. Rooms Where Appliances Need Care
  6. Extraction Fans and Flued Appliances

LPG Installations

pp. 55-60
  1. LPG Cylinders: Parts and Sizes
  2. Locating Cylinders Safely
  3. Changeover Regulators and Manifolds
  4. LPG Pressures and Two-Stage Regulation
  5. Converting an Appliance Between Gases
  6. LPG in Caravans, Boats and Outdoors

Commissioning, Certification and Exam Revision

pp. 61-68
  1. Commissioning in 8 Steps
  2. Setting and Checking Operating Pressure
  3. Safety Devices: Flame Failure, Thermostats, Relief Valves
  4. Gas Safety Certificate and Certificate of Compliance
  5. Unsafe Installations: Disconnect, Label, Report
  6. How to Read the Certifying Exam Diagram Sheet
  7. Exam Day: Calculations Under Time Pressure
  8. Final Revision Checklist

Who This Book Is For

You're working under supervision

You do the work every day. The book puts the reason behind each step on one page, so the theory finally matches what you do on site.

Your registration exam is booked

Revise one topic a night, always in the same order, and walk in knowing where pipe sizing, testing, flues and ventilation sit.

You're going for Certifying Gasfitter

The certification pages and the diagram sheet walkthrough show you how to read a drawn installation and check it step by step.

Plus: 2 Free Books

Gasfitter Exam Practice Questions
BONUS 1

Gasfitter Exam Practice Questions

Exam-style questions on every chapter with the answer explained, so you find your weak spots before the exam does.

15 Common Gasfitting Mistakes, Before and After
BONUS 2

15 Common Gasfitting Mistakes, Before and After

The most frequent errors in pipe sizing, testing, flues and ventilation drawn side by side with the correct version, ready for a quick revision the night before.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I already do gas work every day?

Yes. It isn't a beginner's book: it goes straight to what the exams ask and how it's done on site. It also suits gasfitters trained overseas who need the New Zealand rules.

Where does the content come from?

It's written for New Zealand: AS/NZS 5601.1 as used here, the Gas (Safety and Measurement) Regulations 2010, the Plumbers, Gasfitters, and Drainlayers Act 2006 and the Board's published exam prescriptions, all in metric units. It isn't an Australian or UK book with a new cover. Always check against the current edition.

Is it official material?

No. It's an independent study book, not affiliated with or endorsed by the Plumbers, Gasfitters and Drainlayers Board, WorkSafe NZ or Standards New Zealand, and it doesn't reproduce text or tables from the Standard. It doesn't give you a certificate and doesn't count towards your registration: it helps you revise for the exam.

Does it replace my training or the Standard?

No. It explains the topics with drawings to help you revise. Your training, supervised work and the current Standard still come first.

Are the practice questions the ones in the exam?

No. They're written for this book in exam style, to help you find your weak spots. They aren't official exam questions.

When and how do I get it?

As a PDF by email, sent to the address you enter at checkout. The 2 bonus books come the same way.

Do I have to pay every month?

No. It's a one-off payment, with no subscription.

Can I have it on paper?

Yes. The PDF prints well on A4, so you can keep a copy in the van.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

NZ$ 39NZ$ 89
Get the book · NZ$ 39

This is a digital PDF book sent to your email: nothing is printed or shipped.