Study in Pictures🌐 English (Ireland)
Electrical Certification Illustrated

Digital book in PDF · read it on your phone or print it

Electrical Certification Illustrated

Safe isolation, continuity, ring final circuits, insulation resistance, polarity, Ze and Zs, RCDs and the schedule of test results. Each topic has its own page: the drawing first, then what you need to remember.

  • 64 illustrated pages
  • English
  • 30-day guarantee
€19.90€58.20
Get the book · €19.90

Price shown for: Ireland. In other countries, the checkout shows the price that applies there.

About this book

What it is

Safe isolation, continuity, ring final circuits, insulation resistance, polarity, Ze and Zs, RCDs and the schedule of test results. Each topic has its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're on the Qualified Certifier course
  • Your assessment visit is coming up
  • You already certify your own work
What it covers
  1. Before You Test
  2. Inspection
  3. Continuity
  4. Insulation Resistance
  5. Polarity and Earth
  6. Loop Impedance and Fault Current
  7. RCDs and Functional Tests
  8. Certificates and Records
  9. Practice and Review
Language
English (Ireland)
Pages
64
Format
Digital book in PDF · read it on your phone or print it
Price
€19.90 (Ireland)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

Six steps: identify, isolate, lock off and tag, prove, test L-N, L-E, N-E, re-prove.
Six steps: identify, isolate, lock off and tag, prove, test L-N, L-E, N-E, re-prove.
Bathrooms are Part 701: 30 mA RCD protection and supplementary bonding unless all conditions are met.
Bathrooms are Part 701: 30 mA RCD protection and supplementary bonding unless all conditions are met.
Long-lead method: reading minus lead resistance = R2 at that point
Long-lead method: reading minus lead resistance = R2 at that point
230 V circuits: 500 V DC, minimum 1 MΩ. SELV/PELV: 250 V DC, 0.5 MΩ.
230 V circuits: 500 V DC, minimum 1 MΩ. SELV/PELV: 250 V DC, 0.5 MΩ.
Transformer → line → fault → CPC → back to source: Zs is the whole loop.
Transformer → line → fault → CPC → back to source: Zs is the whole loop.
Compare measured Zs with 80 % of the maximum: 2.3 Ω becomes 1.84 Ω.
Compare measured Zs with 80 % of the maximum: 2.3 Ω becomes 1.84 Ω.
8 steps, dead tests first: 500 V · 1 MΩ, 300 ms and 40 ms, all on one printable page
8 steps, dead tests first: 500 V · 1 MΩ, 300 ms and 40 ms, all on one printable page
500 V · 1 MΩ, 0.4 s · 5 s, 300 ms · 40 ms, × 0.8 and (r1+r2)/4
500 V · 1 MΩ, 0.4 s · 5 s, 300 ms · 40 ms, × 0.8 and (r1+r2)/4

Take a Look at the 9 Parts and 60 Topics

Before You Test

pp. 5-11
  1. One Route, Every Time
  2. Dead Tests First, Live Tests Last
  3. Safe Isolation in Six Steps
  4. Your Instruments and Their Calibration
  5. Earthing Systems You Meet in Ireland
  6. The Symbols on the Schedule
  7. What You Need Before You Start

Inspection

pp. 12-18
  1. Visual Inspection: The Order to Walk It
  2. The Consumer Unit Check
  3. Cables, Colours and Protection
  4. Main Protective Bonding
  5. Bathrooms: Zones and Supplementary Bonding
  6. Checking RCD Coverage on Paper
  7. Labels and Notices

Continuity

pp. 19-26
  1. What a Continuity Test Proves
  2. Nulling Your Leads
  3. R1+R2 by Linking Line and CPC
  4. The Long-Lead Method
  5. Ring Final Circuit, Step 1: End-to-End
  6. Ring Step 2: Line-Neutral Cross-Connection
  7. Ring Step 3: Line-CPC Cross-Connection
  8. Bonding Conductor Continuity

Insulation Resistance

pp. 27-32
  1. What the Insulation Test Shows
  2. Test Voltages and Minimum Values
  3. Preparing the Circuit
  4. Line and Neutral Linked to Earth
  5. Low Readings and Parallel Circuits
  6. Recording Insulation Results

Polarity and Earth

pp. 33-37
  1. Dead Polarity Test
  2. Single-Pole Switches and Lampholders
  3. Earth Electrode Resistance
  4. Measuring Ze at the Origin
  5. Live Polarity at the Origin

Loop Impedance and Fault Current

pp. 38-45
  1. The Earth Fault Loop, Drawn
  2. Zs = Ze + (R1+R2)
  3. Measuring Zs at the Furthest Point
  4. Disconnection Times
  5. Checking Zs Against the Device
  6. The 0.8 Rule for Hot Conductors
  7. Prospective Fault Current
  8. When Zs Is Too High

RCDs and Functional Tests

pp. 46-51
  1. RCD Types: AC, A, F and B
  2. Test at the Rated Current
  3. The Fast Test at 5×IΔn
  4. Half-Rated Check and Nuisance Tripping
  5. The Test Button and the User
  6. Functional Testing of Switchgear

Certificates and Records

pp. 52-58
  1. Which Document for Which Job
  2. The Schedule of Test Results, Column by Column
  3. Supply and Earthing Details
  4. Signing the Declaration
  5. Periodic Inspection: Sampling and Limitations
  6. Recording Observations and Defects
  7. Keeping Your Records

Practice and Review

pp. 59-64
  1. The Full Sequence on One Page
  2. Worked Example: A Three-Bed House
  3. Worked Example: A Small Three-Phase Shop
  4. The Most Frequent Testing Mistakes
  5. Course and Assessment Review Checklist
  6. Quick-Reference Card for the Van

Who This Book Is For

You're on the Qualified Certifier course

Every test from the course on its own page, in the same order you'll use on site. You revise in the evening and it stays.

Your assessment visit is coming up

The sequence, the readings and the schedule columns at a glance, so you can explain each result without stopping to think.

You already certify your own work

A printed reference for the van: the order of the tests, the key values and how each one goes on the certificate.

Plus: 2 Free Books

Test Sequence Workbook: 60 Exam-Style Questions with Answers
BONUS 1

Test Sequence Workbook: 60 Exam-Style Questions with Answers

Practise every test the way it is asked on the course: readings, decisions and certificate entries, with the answer explained under each question.

15 Certification Mistakes: Before & After Cards
BONUS 2

15 Certification Mistakes: Before & After Cards

The most common testing and paperwork errors side by side with the right way, so you can check your own certificates in a glance.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've been an electrician for 20 years or more?

Yes. It doesn't teach you the trade: it puts inspection, testing and certification in one fixed order, with the readings and the paperwork drawn page by page.

Is it written for Ireland, or is it a UK book with a new cover?

It's written for Ireland. It's checked against the current edition of I.S. 10101 and the current CRU certification requirements: Irish earthing arrangements (TN-C-S from the network and TT with an earth electrode), the certificates and the schedule of test results used here. It isn't a BS 7671 book relabelled. The drawings, methods and worked examples are our own; no text or tables from the standard are reproduced.

Is this official material?

No. It's an independent study book. It isn't published, approved or endorsed by NSAI, the CRU, Safe Electric or any course provider.

Does it replace the Qualified Certifier course or my training?

No. It's a study and revision aid. It doesn't give you a certificate, a qualification or a registration, and it doesn't replace the Qualified Certifier course, the training or the registration you need to certify installations.

Are the practice questions the ones from the course assessment?

No. All the questions are written for this book to practise the same topics. They aren't official questions from any course or assessment.

When and how does it arrive?

The book and the 2 gift books arrive as a PDF by email.

Do I have to pay every month?

No. It's a single payment, with no subscription.

Can I have it on paper?

Yes. The PDF is made to print: at home, in a print shop, or just the pages you want for the van.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

€19.90€58.20
Get the book · €19.90

This is a digital PDF book sent to your email: nothing is printed or shipped.