Study in Pictures🌐 English (United Kingdom)
Welding Inspection Illustrated

Digital book in PDF · read it on your phone or print it

Welding Inspection Illustrated

Welding processes, weld symbols, imperfections, the multi-purpose gauge, the WPS paperwork chain, testing and NDT, the practical paper. Each topic has its own page: the drawing first, then what you need to remember.

  • 71 illustrated pages
  • English
  • 30-day guarantee
£19.99£57.99
Get the book · £19.99

Price shown for: United Kingdom. In other countries, the checkout shows the price that applies there.

About this book

What it is

Welding processes, weld symbols, imperfections, the multi-purpose gauge, the WPS paperwork chain, testing and NDT, the practical paper. Each topic has its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're starting on CSWIP 3.1
  • Your exam or resit is close
  • You already work in QA or fabrication
What it covers
  1. The inspector's job
  2. Before welding: the paperwork chain
  3. Welding processes
  4. Weld symbols
  5. Imperfections
  6. Gauges and visual inspection
  7. Materials, testing and NDT in outline
  8. The practical paper and revision
Language
English (United Kingdom)
Pages
71
Format
Digital book in PDF · read it on your phone or print it
Price
£19.99 (United Kingdom)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

Before, during, after: the inspector observes, measures, compares and reports — never repairs.
Before, during, after: the inspector observes, measures, compares and reports — never repairs.
24 V, 200 A, 300 mm/min: 0.96 kJ/mm arc energy, 0.77 kJ/mm heat input.
24 V, 200 A, 300 mm/min: 0.96 kJ/mm arc energy, 0.77 kJ/mm heat input.
Arrow, reference line, dashed line, symbol, size, tail: the six parts on one drawing
Arrow, reference line, dashed line, symbol, size, tail: the six parts on one drawing
Lack of fusion 4011, 4012, 4013: planar, buried, and a reason for UT
Lack of fusion 4011, 4012, 4013: planar, buried, and a reason for UT
4021 incomplete root penetration vs 4013 lack of root fusion
4021 incomplete root penetration vs 4013 lack of root fusion
Preheat, interpass, current, voltage, travel speed, cleaning, consumables and back purge: checked against the WPS.
Preheat, interpass, current, voltage, travel speed, cleaning, consumables and back purge: checked against the WPS.
Clean, identify, scan cap, toes and root, measure, mark up, compare, report: printable blank.
Clean, identify, scan cap, toes and root, measure, mark up, compare, report: printable blank.
Count runs, check fusion to each face, measure, name every imperfection.
Count runs, check fusion to each face, measure, name every imperfection.

Take a Look at the 8 Parts and 67 Topics

The inspector's job

pp. 5-11
  1. What a welding inspector actually does
  2. Code, standard, specification: who decides
  3. Joint or weld? The words the exam uses
  4. Weld preparation, labelled
  5. Butt weld anatomy
  6. Fillet weld anatomy and the 0.7 rule
  7. Welding positions at a glance

Before welding: the paperwork chain

pp. 12-18
  1. pWPS → WPQR → WPS: one chain
  2. Reading a WPS line by line
  3. Welder qualification in one page
  4. Material certificates and traceability
  5. Consumables: storage and baking
  6. Fit-up checks
  7. Before-welding checklist

Welding processes

pp. 19-26
  1. Process numbers you must know
  2. MMA (111) in cross-section
  3. MIG/MAG (131/135) and transfer modes
  4. Flux-cored (136)
  5. TIG (141)
  6. Submerged arc (121)
  7. Shielding gases in one table
  8. Heat input, worked out

Weld symbols

pp. 27-35
  1. The parts of a weld symbol
  2. Arrow side or other side?
  3. System A vs system B
  4. Elementary symbols
  5. Supplementary symbols
  6. Fillet sizes: a or z?
  7. Intermittent welds
  8. Read any symbol in 4 steps
  9. Double-sided and tail information

Imperfections

pp. 36-48
  1. The six groups of imperfections
  2. Cracks by location
  3. Hydrogen cracking: four ingredients
  4. Solidification cracking and lamellar tearing
  5. Porosity and wormholes
  6. Slag and tungsten inclusions
  7. Lack of fusion: sidewall, inter-run, root
  8. Incomplete penetration vs lack of root fusion
  9. Undercut and overlap
  10. Root profile faults
  11. Cap profile faults
  12. Misalignment, arc strikes and spatter
  13. Quality levels B, C and D

Gauges and visual inspection

pp. 49-56
  1. Visual inspection conditions
  2. Your kit, laid out
  3. The multi-purpose gauge, part by part
  4. Measuring leg length and throat
  5. Measuring undercut and excess weld metal
  6. Measuring misalignment
  7. During-welding checks
  8. After-welding checklist

Materials, testing and NDT in outline

pp. 57-64
  1. Carbon equivalent and preheat
  2. The heat-affected zone
  3. Distortion and residual stress
  4. Tensile and bend tests
  5. Charpy impact test
  6. Macro and hardness
  7. Penetrant and magnetic particle testing
  8. Ultrasonic and radiographic testing

The practical paper and revision

pp. 65-71
  1. Plate sample: the method
  2. Pipe sample: clock positions
  3. Macro sample: what to look for
  4. Writing the report
  5. Accept or reject: using the criteria sheet
  6. The most frequent mistakes
  7. The whole job on one page

Who This Book Is For

You're starting on CSWIP 3.1

Every syllabus topic on its own drawn page, so the course makes sense from day one instead of piling up as notes.

Your exam or resit is close

Symbols, imperfections and the practical paper method in the same order every time, to revise in short sessions and not go blank on the day.

You already work in QA or fabrication

A printable reference for the symbol you doubt, the imperfection name you need or the checklist before you sign off a weld.

Plus: 2 Free Books

Welding Inspection Exam-Style Questions
BONUS 1

Welding Inspection Exam-Style Questions

Test yourself on every topic with exam-style questions and an explained answer for each one, so you know exactly where you stand before the exam.

The 15 Most Common Inspection Mistakes
BONUS 2

The 15 Most Common Inspection Mistakes

Each frequent mistake drawn before and after — wrong gauge reading, arrow side mixed up, imperfection misnamed — so you stop making it on the sample weld.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've been welding for years but never studied inspection?

Yes. It starts from what you already do in the workshop and draws the rest: symbols, imperfection names, the gauge, the paperwork and the report.

Where does the content come from?

From the published CSWIP 3.1 syllabus and the BS EN ISO standards it's based on: ISO 2553 for weld symbols, ISO 6520-1 for imperfections, ISO 5817 for quality levels and ISO 17637 for visual testing. It's written for the UK exam, not American AWS codes, and checked against the current editions of those standards. All drawings are our own.

Is it official material?

No. It's an independent study guide, not affiliated with or endorsed by TWI, CSWIP or BSI.

Does it replace the course or practical training?

No. It's for revising before, during and after the course. It doesn't replace the training, the hands-on practice or the current standards, and it doesn't give you any certificate: certification only comes from sitting and passing the exam.

Are the practice questions the ones from the exam?

No. They're written for this book, in the style of the exam, with an explained answer for each one.

When and how does it arrive?

As a PDF to the email you enter at checkout, together with the 2 bonus books. It's a one-off payment, no subscription.

Is it up to date with the current standards?

It's checked against the current editions of the BS EN ISO standards in the CSWIP 3.1 syllabus. Your course and the current standards always come first: if anything differs, follow them.

Can I have it on paper?

Yes. The PDF is made to print, so you can take it to the shop, the yard or the platform.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

£19.99£57.99
Get the book · £19.99

This is a digital PDF book sent to your email: nothing is printed or shipped.