Study in Pictures🌐 English (United Kingdom)
Boat Electrics Illustrated

Digital book in PDF · read it on your phone or print it

Boat Electrics Illustrated

Battery banks, cable sizing, voltage drop, fuses, the battery isolator, charging, shore power, fault-finding and what a safety examination looks at. Every topic has its own page: first the drawing, then the numbers you need to remember.

  • 65 illustrated pages
  • English
  • 30-day guarantee
£19.99£57.99
Get the book · £19.99

Price shown for: United Kingdom. In other countries, the checkout shows the price that applies there.

About this book

What it is

Battery banks, cable sizing, voltage drop, fuses, the battery isolator, charging, shore power, fault-finding and what a safety examination looks at. Every topic has its own page: first the drawing, then the numbers you need to remember.

Who This Book Is For
  • You're learning your boat's system over the winter
  • Your boat safety examination is coming up
  • You already work in a boatyard
What it covers
  1. How a Boat's Electrics Fit Together
  2. Batteries and Battery Banks
  3. Cables, Sizing and Connections
  4. Protection: Fuses, Breakers and Isolators
  5. Charging: Alternator, Solar and Chargers
  6. Shore Power and 230 V AC
  7. Fault-Finding with a Multimeter
  8. Projects, Review and Checklists
Language
English (United Kingdom)
Pages
65
Format
Digital book in PDF · read it on your phone or print it
Price
£19.99 (United Kingdom)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

12.65 V full · 12.45 V 75% · 12.24 V 50% · 12.06 V 25% · 11.89 V empty (at rest).
12.65 V full · 12.45 V 75% · 12.24 V 50% · 12.06 V 25% · 11.89 V empty (at rest).
10 A over 12 m round trip at 0.36 V (3%) drop: 5.7 mm², so fit 6 mm².
10 A over 12 m round trip at 0.36 V (3%) drop: 5.7 mm², so fit 6 mm².
Main fuse: positive conductor, as close to the battery as practicable – no fixed UK distance.
Main fuse: positive conductor, as close to the battery as practicable – no fixed UK distance.
Isolator: near each bank, easy to reach, clearly marked – bypass circuits fused separately.
Isolator: near each bank, easy to reach, clearly marked – bypass circuits fused separately.
Pedestal, lead, inlet, double-pole main switch and RCD, consumer unit, sockets: the full 230 V path.
Pedestal, lead, inlet, double-pole main switch and RCD, consumer unit, sockets: the full 230 V path.
Polarity warning on: main switch off, unplug the shore lead and report it to the marina.
Polarity warning on: main switch off, unplug the shore lead and report it to the marina.
Isolate and think, battery, load, compare: the same four boxes on every fault
Isolate and think, battery, load, compare: the same four boxes on every fault
Batteries within 10 mm, terminals covered, isolator marked, fuses rated, cables supported, lead sound.
Batteries within 10 mm, terminals covered, isolator marked, fuses rated, cables supported, lead sound.

Take a Look at the 8 Parts and 61 Topics

How a Boat's Electrics Fit Together

pp. 5-11
  1. Your boat's system on one page
  2. Volts, amps, ohms and watts in boat terms
  3. 12 V or 24 V: what changes
  4. DC and AC on the same boat
  5. Start bank and domestic bank
  6. Positive and negative: the full circuit
  7. Safe working order: isolate before you touch

Batteries and Battery Banks

pp. 12-20
  1. Inside a lead-acid battery
  2. Lithium (LiFePO4) on a boat
  3. Amp-hours and usable capacity
  4. Your daily power budget
  5. Series and parallel wiring
  6. Reading state of charge from resting voltage
  7. Battery monitors and shunts
  8. Mounting, venting and securing batteries
  9. Why batteries die early

Cables, Sizing and Connections

pp. 21-28
  1. Marine cable: tinned and multi-strand
  2. DC cable colours
  3. Current-carrying capacity
  4. Voltage drop: why the pump runs slowly
  5. Sizing a cable: the worked example
  6. Crimping terminals properly
  7. Busbars and terminal studs
  8. Routing and supporting cables

Protection: Fuses, Breakers and Isolators

pp. 29-35
  1. What a fuse protects
  2. Where the main fuse goes
  3. Types of fuse and breaker
  4. The battery isolator
  5. The distribution panel
  6. Bilge pump wiring
  7. Switching on the positive, never on the negative

Charging: Alternator, Solar and Chargers

pp. 36-43
  1. The charging cycle
  2. The alternator and warning light
  3. Charging two banks from one alternator
  4. DC-to-DC chargers
  5. Solar panels and controllers
  6. Shore-powered battery chargers
  7. Inverters
  8. Charging on a mooring without shore power

Shore Power and 230 V AC

pp. 44-51
  1. From the marina pedestal to your sockets
  2. The shore lead and plugs
  3. AC cable colours
  4. RCDs and double-pole breakers
  5. Reverse polarity
  6. Galvanic corrosion and the shore earth
  7. Anodes and bonding
  8. When AC work needs a qualified electrician

Fault-Finding with a Multimeter

pp. 52-59
  1. Your multimeter, setting by setting
  2. The clamp meter
  3. The fault-finding order
  4. Voltage drop test under load
  5. Finding a hidden drain
  6. Engine just clicks
  7. Domestic bank flat every morning
  8. Bilge pump or light not working

Projects, Review and Checklists

pp. 60-65
  1. Project: replacing the domestic bank
  2. Project: adding a solar panel
  3. Drawing your own wiring diagram
  4. Winter lay-up and spring recommissioning
  5. What a safety examination looks at
  6. Most common mistakes

Who This Book Is For

You're learning your boat's system over the winter

One topic per page, in order: by spring you know what every cable, fuse and switch on board is doing.

Your boat safety examination is coming up

Batteries secured, terminals covered, isolator marked, fuses rated for the cable: one page shows what the examination looks at, and the checklist lets you go through your own boat first.

You already work in a boatyard

You've wired by watching. Now you see why that cable is that size and that fuse sits where it does, so you can explain it to the engineer.

Plus: 2 Free Books

Boat Electrics Workbook: Worked Problems
BONUS 1

Boat Electrics Workbook: Worked Problems

Practise Ohm's law, cable sizing, voltage drop and fault-finding on real boat circuits, with every answer worked through step by step.

Boat Electrics Quick-Reference Cards
BONUS 2

Boat Electrics Quick-Reference Cards

Cable colours, fuse placement, multimeter settings and the pre-work isolation steps on printable cards to keep in the chart table or the toolbox.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I look after my own 12 V or 24 V boat?

Yes. It covers 12 V and 24 V systems on narrowboats, sailing boats and motor boats. The worked examples use 12 V and the same steps work on 24 V: the resting voltages double and a 3% drop is 0.72 V instead of 0.36 V. It starts from how the whole system fits together, so it works if you're new to it, and if you've been wiring for years it gives you the why behind each cable and fuse.

Where does the content come from?

It's checked against the current Boat Safety Scheme Essential Guide, BS EN ISO 10133 (DC installations), BS EN ISO 13297 (AC installations), BS 7671 Section 709 and the equipment manufacturers' instructions. It's written for UK boats, not adapted from a US book: 230 V shore power and UK cable colours. The Boat Safety Scheme applies on inland waterways; on a coastal marina, the ISO standards and the manufacturer's instructions are the reference.

Is it official material?

No. It's an independent illustrated book. It isn't published, approved or endorsed by any scheme, standards body or manufacturer, and it doesn't give you a certificate or qualification: it's study and reference material.

Does it replace training or a qualified electrician?

No. It helps you understand your system and work in the right order. Work on 230 V AC shore power must be done or checked by a competent person, and the manufacturer's instructions always come first.

Are the practice problems taken from an exam or inspection?

No. The worked problems are written for this book, on typical boat circuits, to practise the maths and the fault-finding order.

When and how does it arrive?

As a PDF by email, to the address you enter at checkout. The two free books come the same way.

Do I have to pay every month?

No. It's a one-off payment, with no subscription.

Can I have it on paper?

It's a PDF, not a posted book. It's made to print at home, so you can keep a copy at the chart table and another in the toolbox, and have it on your phone or tablet on board.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

£19.99£57.99
Get the book · £19.99

This is a digital PDF book sent to your email: nothing is printed or shipped.