Study in Pictures🌐 English (Canada)
Truck & Transport Mechanic Illustrated

Digital book in PDF · read it on your phone or print it

Truck & Transport Mechanic Illustrated

For the Red Seal interprovincial exam in Canada, metric throughout. Air brakes, the diesel, DPF, SCR and DEF, multiplexing and J1939 codes, driveline, steering and alignment, and the A/C cycle. Every topic gets its own page: the drawing first, then what you need to remember.

  • 65 illustrated pages
  • English
  • 30-day guarantee
CA$ 34.99CA$ 79.99
Get the book · CA$ 34.99

Price shown for: Canada. In other countries, the checkout shows the price that applies there.

About this book

What it is

For the Red Seal interprovincial exam in Canada, metric throughout. Air brakes, the diesel, DPF, SCR and DEF, multiplexing and J1939 codes, driveline, steering and alignment, and the A/C cycle. Every topic gets its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're in your final level
  • Your exam date is booked
  • You've been fixing trucks for years
What it covers
  1. The truck, the exam and the shop
  2. Air brakes
  3. The diesel engine
  4. Fuel, intake and aftertreatment
  5. Electrical and multiplexing
  6. Driveline
  7. Steering, suspension and wheel ends
  8. HVAC, trailers and inspection
  9. Review before the exam
Language
English (Canada)
Pages
65
Format
Digital book in PDF · read it on your phone or print it
Price
CA$ 34.99 (Canada)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

WHMIS and SDS, lockout, rated jack stands, caged spring brakes, drained air lines
WHMIS and SDS, lockout, rated jack stands, caged spring brakes, drained air lines
Cut-out 828–1,000 kPa (120–145 psi); cut-in 138–172 kPa lower, never under 690 kPa
Cut-out 828–1,000 kPa (120–145 psi); cut-in 138–172 kPa lower, never under 690 kPa
Four strokes in four panels: compression around 15:1 to 18:1 lights the fuel without a spark
Four strokes in four panels: compression around 15:1 to 18:1 lights the fuel without a spark
Restriction in inches of water, and why the clean side matters most
Restriction in inches of water, and why the clean side matters most
V = I × R: 12 V across 4 Ω = 3 A, and 2 A through 6 Ω = 12 V
V = I × R: 12 V across 4 Ω = 3 A, and 2 A through 6 Ω = 12 V
Pull-type twin-disc clutch: internal adjustment first, then linkage; clutch brake only from a stop
Pull-type twin-disc clutch: internal adjustment first, then linkage; clutch brake only from a stop
Stud-piloted and hub-piloted mounting side by side, with clean faces, crisscross order and torque from the manufacturer
Stud-piloted and hub-piloted mounting side by side, with clean faces, crisscross order and torque from the manufacturer
Compressor → condenser → receiver-dryer → expansion valve → evaporator, with high and low side marked
Compressor → condenser → receiver-dryer → expansion valve → evaporator, with high and low side marked

Take a Look at the 9 Parts and 61 Topics

The truck, the exam and the shop

pp. 5-10
  1. The whole truck on one page
  2. How the certification exam is built
  3. Shop safety you get asked about
  4. Reading a metric micrometer
  5. Dial indicator: runout and endplay
  6. Fasteners, grades and torque

Air brakes

pp. 11-19
  1. The air system from compressor to chamber
  2. Compressor and governor
  3. Air dryer and moisture
  4. Dual circuits: primary and secondary
  5. Service chamber vs spring brake
  6. Slack adjusters and pushrod stroke
  7. Foundation brakes: S-cam drum and air disc
  8. The air brake check, always in the same order
  9. ABS and the tractor protection valve

The diesel engine

pp. 20-27
  1. Four-stroke diesel in cutaway
  2. Block, liners and liner protrusion
  3. Crankshaft, bearings and oil clearance
  4. Valve train and overhead adjustment
  5. Engine compression brake
  6. Lubrication flow
  7. Cooling system flow
  8. Turbocharger and charge air cooler

Fuel, intake and aftertreatment

pp. 28-33
  1. Fuel flow from tank to injector
  2. High-pressure common rail
  3. Air intake and restriction
  4. EGR: cooling the combustion
  5. DOC and DPF: soot and regeneration
  6. SCR and DEF

Electrical and multiplexing

pp. 34-43
  1. Ohm's law with one triangle
  2. Series and parallel circuits
  3. Reading a wiring diagram step by step
  4. The multimeter: four measurements
  5. Voltage drop: the test that finds bad connections
  6. Batteries: state of charge and load test
  7. Starting and charging circuits
  8. J1939 data link and multiplexing
  9. Fault codes: SPN and FMI
  10. Lights and the 7-way trailer connector

Driveline

pp. 44-50
  1. Clutch and clutch brake
  2. Manual transmission power flow
  3. Range and splitter
  4. Automated manual transmissions
  5. Driveshaft, U-joints and operating angles
  6. Differentials and the power divider
  7. Gear ratios worked out

Steering, suspension and wheel ends

pp. 51-57
  1. Steering system from wheel to kingpin
  2. Alignment angles: camber, caster, toe
  3. Spring and air suspension
  4. Wheel bearing endplay
  5. Hub-piloted wheels and torque
  6. Tires: inflation, tread and duals
  7. Fifth wheel and coupling

HVAC, trailers and inspection

pp. 58-61
  1. A/C refrigerant cycle
  2. Trailer air: gladhands, supply and control
  3. Periodic inspection in Canada
  4. Diagnosis as a flowchart

Review before the exam

pp. 62-65
  1. Reading a multiple-choice question
  2. The numbers to have on one page
  3. Formulas on one page
  4. The most common mistakes, by system

Who This Book Is For

You're in your final level

Every system you saw in school, organized one page at a time, so the technical training finally fits together.

Your exam date is booked

A review you can go through system by system, with the key numbers and formulas on one page each, for the last weeks before the exam.

You've been fixing trucks for years

You already know the work with your hands. The book shows it drawn and named, the way the exam asks it, so you can challenge it as a trade qualifier.

Plus: 2 Free Books

Truck Mechanic Exam-Style Practice Questions
BONUS 1

Truck Mechanic Exam-Style Practice Questions

Practise with multiple-choice questions in the same style as the certification exam, each with the answer explained and the page of the book to go back to.

The 15 Most Common Shop Mistakes, Before & After
BONUS 2

The 15 Most Common Shop Mistakes, Before & After

See side by side the errors mechanics make most often, from brake adjustment to torque sequence, and the right way to do it, so you can review them in one sitting before the exam.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've been fixing trucks for years without my ticket?

Yes. It's not a beginner book: nobody explains what a wrench is. It takes what you already do in the shop and lays it out system by system, drawn and named the way the exam asks it. Your apprentice manual and question bank tell you the answer; this book shows you the system on one page, so the answer makes sense the next day too.

Is it for the exam in Canada, or a US book in inches?

It's checked against the Red Seal Occupational Standard for Truck and Transport Mechanic, National Safety Code Standard 11, Transport Canada requirements and the provincial apprenticeship authorities. Because it follows the national standard, it's the same base in every province and territory that uses the interprovincial exam. It's in English, with metric units throughout. Specs are marked so you can check them against the current version and the manufacturer's data.

Is this official material?

No. It's an independent study book. It isn't affiliated with or endorsed by the Red Seal Program, any provincial apprenticeship authority or any government body.

Does it replace my apprenticeship training?

No. It's a review tool to use alongside your technical training, your shop hours and the manufacturer's service information. It doesn't give a certificate and doesn't count toward apprenticeship hours: the ticket comes only from passing the exam with your province.

Are the practice questions the ones on the exam?

No. They're written for this book, in multiple-choice style, each with the answer explained. They aren't official questions from any exam.

When and how do I get it?

The book and the 2 bonus books arrive as PDFs by email, at the address you enter at checkout.

Do I have to pay every month?

No. It's a one-time payment. No subscription.

Can I have it on paper?

Yes. The PDF is made to print, at home or at a print shop, so you can keep it in your toolbox or at the bench.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

CA$ 34.99CA$ 79.99
Get the book · CA$ 34.99

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Ontario G1 Test Illustrated

The road signs and rules of the road you need for the Ontario G1 knowledge test, one topic per page with a big clear…

From CA$ 34.99 CA$ 79.99

Ontario Class A Truck Illustrated

Everything a Class A driver in Ontario needs to know for the truck knowledge test, drawn one topic per page: air…

From CA$ 34.99 CA$ 79.99