Study in Pictures🌐 English (Canada)
Industrial Electrician Exam Illustrated

Digital book in PDF · read it on your phone or print it

Industrial Electrician Exam Illustrated

Single-line diagrams, transformers, 9-lead motors, overloads, ladder logic, VFDs, the PLC scan, 4-20 mA loops and lockout. Each topic has its own page: the drawing first, then what you need to remember.

  • 63 illustrated pages
  • English
  • 30-day guarantee
CA$ 34.99CA$ 79.99
Get the book · CA$ 34.99

Price shown for: Canada. In other countries, the checkout shows the price that applies there.

About this book

What it is

Single-line diagrams, transformers, 9-lead motors, overloads, ladder logic, VFDs, the PLC scan, 4-20 mA loops and lockout. Each topic has its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're in your final apprenticeship period
  • Your exam date is booked
  • You already work the plant floor
What it covers
  1. Back to Basics, Drawn
  2. AC and Three-Phase
  3. Plant Distribution and Transformers
  4. Motors and Starters
  5. Control Circuits and Ladder Diagrams
  6. Drives, PLCs and Instrumentation
  7. Code, Grounding and Safety
  8. Exam Review and Practice
Language
English (Canada)
Pages
63
Format
Digital book in PDF · read it on your phone or print it
Price
CA$ 34.99 (Canada)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

CT 600:5 = 120:1, 5 A secondary, and never open it under load
CT 600:5 = 120:1, 5 A secondary, and never open it under load
40 A motor: conductors ≥ 50 A; overload ≤ 50 A (SF 1.15) or ≤ 46 A
40 A motor: conductors ≥ 50 A; overload ≤ 50 A (SF 1.15) or ≤ 46 A
Disconnect, fuses, contactor, overload: the overload protects the motor, the fuses protect the circuit
Disconnect, fuses, contactor, overload: the overload protects the motor, the fuses protect the circuit
0-150 °C transmitter at 10 mA = 56.25 °C · 12 mA = 50%
0-150 °C transmitter at 10 mA = 56.25 °C · 12 mA = 50%
Ampacity: Tables 1–4, then Table 5A for heat, Table 5C for bundling, Rule 4-006 for terminals.
Ampacity: Tables 1–4, then Table 5A for heat, Table 5C for bundling, Rule 4-006 for terminals.
Lockout per CSA Z460-20: nine typical steps, stored energy released, verified live-dead-live.
Lockout per CSA Z460-20: nine typical steps, stored energy released, verified live-dead-live.
Ohm, power, voltage drop, impedance, PF, three-phase, transformers, motor speed, slip, V/Hz and 4-20 mA: one sheet.
Ohm, power, voltage drop, impedance, PF, three-phase, transformers, motor speed, slip, V/Hz and 4-20 mA: one sheet.
1800 r/min synchronous, 125% conductors, 115/125% overloads, wye-delta at about one-third.
1800 r/min synchronous, 125% conductors, 115/125% overloads, wye-delta at about one-third.

Take a Look at the 8 Parts and 59 Topics

Back to Basics, Drawn

pp. 5-11
  1. How the Exam Is Built
  2. Ohm's Law Triangle in One Picture
  3. The Power Wheel: Watts Without Guessing
  4. Series, Parallel, Combination: Same 3 Steps
  5. Kirchhoff's Two Laws on a Real Circuit
  6. Magnetism and Induction: Why Coils Push Back
  7. Capacitors and Inductors: Who Leads, Who Lags

AC and Three-Phase

pp. 12-18
  1. The Sine Wave: Peak, RMS, Frequency
  2. Impedance and the Impedance Triangle
  3. Power Factor: The Beer Glass Picture
  4. Correcting Power Factor in 4 Steps
  5. Three-Phase: Three Waves 120° Apart
  6. Wye vs Delta: Line and Phase Values
  7. Three-Phase Power in the Same 3 Steps

Plant Distribution and Transformers

pp. 19-25
  1. The Plant Single-Line: Utility to Machine
  2. Transformer Ratio Without Mixing It Up
  3. Sizing a Transformer by kVA
  4. Three-Phase Connections: Delta-Wye and Friends
  5. Transformer Polarity and Paralleling
  6. Instrument Transformers: CT and PT
  7. Protection Coordination in One Curve

Motors and Starters

pp. 26-33
  1. How a 3-Phase Induction Motor Turns
  2. Reading a Motor Nameplate
  3. Dual-Voltage Leads: 9-Lead Wye and Delta
  4. Motor Conductors and Overloads per the CEC
  5. Across-the-Line Starter: Power and Control
  6. Reduced-Voltage Starting Compared
  7. Reversing and Two-Speed Starters
  8. Synchronous, DC and Single-Phase Motors

Control Circuits and Ladder Diagrams

pp. 34-40
  1. Reading a Ladder Diagram: Rules of the Rungs
  2. Symbols You Must Know Cold
  3. Stop-Start-Seal-In, Step by Step
  4. Multiple Stations and Interlocks
  5. Timers: On-Delay vs Off-Delay
  6. Control Transformers and Fusing
  7. Troubleshooting a Control Circuit: Half-Splitting

Drives, PLCs and Instrumentation

pp. 41-48
  1. Inside a VFD: Rectifier, DC Bus, Inverter
  2. Volts per Hertz and Speed Control
  3. VFD Faults and Good Practice
  4. The PLC Scan: Read, Solve, Write
  5. PLC I/O: Discrete, Analog, Sinking, Sourcing
  6. Ladder Logic in the PLC: XIC, XIO, OTE
  7. Timers and Counters in PLC Logic
  8. 4-20 mA Loops and Scaling

Code, Grounding and Safety

pp. 49-56
  1. How the CEC Is Organized
  2. Conductor Ampacity and Correction
  3. Voltage Drop in 4 Steps
  4. Grounding vs Bonding
  5. Ungrounded and High-Resistance Grounded Systems
  6. Hazardous Locations: Zones Made Visual
  7. Lockout and Verification
  8. Arc Flash and Shock Boundaries

Exam Review and Practice

pp. 57-63
  1. The Calculation Formula Sheet
  2. Single-Line and Ladder Symbols Recap
  3. Wye, Delta and Transformer Recap
  4. Motor and Starter Recap
  5. Troubleshooting Flow: Symptom to Cause
  6. How to Read a Multiple-Choice Question
  7. Your Last-Week Review Plan

Who This Book Is For

You're in your final apprenticeship period

Every topic from your in-school blocks, put back in order and drawn, so you can review between shifts instead of digging through binders.

Your exam date is booked

The calculations always in the same steps, the formula sheet and the recaps on one page each, so the last weeks are review, not catch-up.

You already work the plant floor

You know the work. The book puts the theory behind it in order, so you can challenge the exam and explain why the circuit does what it does.

Plus: 2 Free Books

Exam-Style Practice Questions with Answers
BONUS 1

Exam-Style Practice Questions with Answers

Practise with multiple-choice questions in the style of the journeyperson exam, each with the answer explained, so you know where you stand before exam day.

15 Common Mistakes: Before & After
BONUS 2

15 Common Mistakes: Before & After

See the 15 most frequent errors in diagrams, calculations and control circuits drawn side by side with the correct version, so you don't repeat them on the exam or on the floor.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've worked in a plant for years and haven't studied in a long time?

Yes. It isn't a beginner's course: Part I is a quick, drawn refresher of the basics, and from there it goes straight into transformers, motors, controls, drives, PLCs and code calculations, one topic per page.

Where does the content come from?

It's checked against the current Canadian Electrical Code, Part I (CSA C22.1), the Red Seal Occupational Standard for Industrial Electrician, CSA Z462 and CSA Z460. Code rules are explained with our own examples, in the units the code uses (AWG and kcmil, metres, °C); no code text or tables are reproduced. Provinces adopt the CEC with their own amendments, so confirm exam details with your provincial or territorial apprenticeship authority.

Is it official material?

No. It's an independent illustrated study book. It isn't issued, approved or endorsed by the Red Seal Program, CSA Group or any apprenticeship authority, and it doesn't give a certificate or count toward your hours or in-school training.

Does it replace my course or training?

No. It's a review tool to use alongside your technical training, your on-the-job hours and the code book itself. What it adds: the topics your binders and videos cover, put in one order, one drawn page each, with the numbers in a box, so you can review a topic in a few minutes instead of hunting through notes.

Are the practice questions the real exam questions?

No. They're written for this book, in the style of a multiple-choice journeyperson exam, each with the answer explained.

When and how do I get it?

The book and the 2 bonus books arrive as PDFs by email, at the address you enter at checkout.

Do I have to pay every month?

No. It's a one-time payment. No subscription.

Can I have it on paper?

Yes. The PDF is printable, so you can print the whole book or just the pages you want to keep in your toolbox.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

CA$ 34.99CA$ 79.99
Get the book · CA$ 34.99

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Home Generator Illustrated

Size your home generator from a real load list, place it outdoors at the right distance, refuel and start it the safe…

From CA$ 34.99 CA$ 79.99