Study in Pictures🌐 English (Canada)
Compact Tractor Illustrated

Digital book in PDF · read it on your phone or print it

Compact Tractor Illustrated

Controls, three-point hitch, PTO, front loader, ballast in kilograms, slopes, driveway grading, snow and maintenance through the Canadian year. Every topic has its own page: the drawing first, then what you need to remember.

  • 70 illustrated pages
  • English
  • 30-day guarantee
CA$ 34.99CA$ 79.99
Get the book · CA$ 34.99

Price shown for: Canada. In other countries, the checkout shows the price that applies there.

About this book

What it is

Controls, three-point hitch, PTO, front loader, ballast in kilograms, slopes, driveway grading, snow and maintenance through the Canadian year. Every topic has its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You've just bought your first compact tractor
  • Your first season on the acreage is coming
  • You already use it every weekend
What it covers
  1. Meet Your Tractor
  2. Before You Climb On
  3. The Three-Point Hitch
  4. PTO: The Most Dangerous Shaft on the Farm
  5. The Front Loader
  6. Ballast, Stability and Slopes
  7. Jobs on the Acreage
  8. Owner Maintenance Through the Canadian Year
  9. Review and Quick Checks
Language
English (Canada)
Pages
70
Format
Digital book in PDF · read it on your phone or print it
Price
CA$ 34.99 (Canada)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

Ten parts, one drawing: engine to loader mounts, each labelled with its job
Ten parts, one drawing: engine to loader mounts, each labelled with its job
Loose sway lets a box blade hit the tires; snug chains keep a mower centred.
Loose sway lets a box blade hit the tires; snug chains keep a mower centred.
540 rpm = 9 turns per second: a loose sleeve is wrapped before you can react.
540 rpm = 9 turns per second: a loose sleeve is wrapped before you can react.
Forks cut safe capacity: load to the backrest, tilt back, travel low and slow.
Forks cut safe capacity: load to the backrest, tilt back, travel low and slow.
Before using a front loader, add the rear weight your manufacturer recommends.
Before using a front loader, add the rear weight your manufacturer recommends.
Rotary cutter: 92 m (300 ft) throw zone, replace damaged blades in pairs, never unclog while turning
Rotary cutter: 92 m (300 ft) throw zone, replace damaged blades in pairs, never unclog while turning
Service by engine hours: hour meter, your manual's chart, and a written log
Service by engine hours: hour meter, your manual's chart, and a written log

Take a Look at the 9 Parts and 66 Topics

Meet Your Tractor

pp. 5-13
  1. Your Tractor, Part by Part
  2. Sub-Compact or Compact: What You Actually Have
  3. Hydrostatic or Gear Drive
  4. Every Lever and Pedal, Labelled
  5. The Dashboard Lights You Must Know
  6. 4WD and Diff Lock: When to Use Each
  7. ROPS Up, Seatbelt On
  8. Safety Interlocks: Why the Tractor Won't Start
  9. Tires: Ag, Turf and Industrial

Before You Climb On

pp. 14-21
  1. The Daily Walk-Around, in Order
  2. Checking the Fluids
  3. Tire Pressure and Loose Lug Nuts
  4. Greasing: Where the Fittings Are
  5. Getting On and Off: Three Points of Contact
  6. The Start-Up Sequence
  7. The Shutdown Sequence
  8. Diesel Fuel and Keeping It Clean

The Three-Point Hitch

pp. 22-29
  1. The Three-Point Hitch, Part by Part
  2. Hitch Categories and Pin Sizes
  3. Hitching an Implement, Step by Step
  4. Unhitching Without a Fight
  5. Setting the Top Link for a Level Implement
  6. Sway Chains and Stabilizers
  7. Position Control and Draft Control
  8. Quick Hitch: Faster, With Limits

PTO: The Most Dangerous Shaft on the Farm

pp. 30-35
  1. What the PTO Does
  2. Shields and Guards That Stay On
  3. Entanglement: Seconds, Not Minutes
  4. Shaft Length and Overlap
  5. Engaging the PTO the Gentle Way
  6. Shear Bolts, Slip Clutches and the Overrunning Clutch

The Front Loader

pp. 36-43
  1. The Loader, Part by Part
  2. The Joystick: Four Moves Plus Float
  3. Carry It Low
  4. Reading the Loader Capacity
  5. Filling the Bucket Without Spinning
  6. Pallet Forks and Heavy Lifts
  7. Never Under the Loader, Never on It
  8. Taking the Loader Off and On

Ballast, Stability and Slopes

pp. 44-52
  1. The Stability Triangle
  2. Why the Loader Needs Rear Ballast
  3. Working Out Ballast in Kilograms
  4. Ballast Options: Box, Wheel Weights, Filled Tires
  5. Wheel Spacing for More Stability
  6. Slopes: Up and Down, Never Across
  7. Loaded Bucket on a Hill: Heavy End Uphill
  8. Ditches, Banks and Soft Edges
  9. Towing From the Drawbar Only

Jobs on the Acreage

pp. 53-59
  1. Mowing Rough Grass With a Rotary Cutter
  2. Belly Mower and the Lawn
  3. Grading a Gravel Driveway With a Box Blade
  4. Crown and Ditches: Making Water Run Off
  5. Digging Post Holes Safely
  6. Tilling a Garden
  7. Clearing Snow: Bucket, Blade or Blower

Owner Maintenance Through the Canadian Year

pp. 60-67
  1. The Hour Meter and the Service Chart
  2. Changing the Engine Oil and Filter
  3. Air Filter: Inspect, Don't Overclean
  4. Hydraulic and Transmission Fluid
  5. Cold Starts: Block Heater and Battery
  6. Winter Diesel and Fuel Gelling
  7. Spring Start-Up Checklist
  8. Fall Storage Checklist

Review and Quick Checks

pp. 68-70
  1. The Ten Most Common Mistakes, Drawn
  2. When Something Sounds Wrong
  3. Your One-Page Safe Operating Sheet

Who This Book Is For

You've just bought your first compact tractor

Every lever, pedal and dashboard light is drawn and labelled, so you know what each one does before you turn the key.

Your first season on the acreage is coming

Hitch, PTO, loader and ballast in the order you'll use them, plus the spring start-up and fall storage checklists for the Canadian year.

You already use it every weekend

One page to check the stability triangle, a slope or the service chart when you have a doubt, printed and kept in the shop.

Plus: 2 Free Books

Spot the Hazard: Tractor Workbook
BONUS 1

Spot the Hazard: Tractor Workbook

Drawn scenes from a real acreage where you find what's wrong (loader too high, PTO shield missing, side slope, passenger on the fender), so the safe habit is automatic before you climb on.

Walk-Around & Common Mistakes Cards
BONUS 2

Walk-Around & Common Mistakes Cards

Printable quick cards with the daily walk-around in order and the most common mistakes drawn before/after, to pin up in the shop and check in one glance.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've just bought my first compact tractor, or I've been using one for a while?

Yes. It starts with what each control does and goes up to ballast, slopes and maintenance. It works with any brand: it teaches the logic common to compact tractors, and the numbers for your own machine come from your operator's manual.

Where does the content come from?

It's checked against Canadian farm safety guidance (CCOHS, the Canadian Agricultural Safety Association and provincial farm safety resources) and the ISO/ASABE standards for the three-point hitch and PTO.

Is this official material?

No. It's an independent illustrated book, not affiliated with or endorsed by any safety body or tractor brand, and it doesn't come with a certificate. For hands-on training, ask your dealer or your provincial farm safety association.

Does it replace the operator's manual or hands-on training?

No. It's a reference to understand and remember. Your operator's manual, your dealer and hands-on safety training always come first.

Isn't all this already in my operator's manual or free on YouTube?

The information is out there, but spread across paragraphs and videos that each do it differently. Here every topic is one drawn page, always in the same order, so you find it quickly in the shed. The numbers for your own machine still come from your operator's manual.

When and how do I get it?

The book and the 2 gift books arrive as a PDF by email, at the address you enter at checkout.

Do I have to pay every month?

No. It's a one-time payment.

Can I have it on paper?

Yes. The PDF prints on regular letter paper, so you can keep it in the shop.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

CA$ 34.99CA$ 79.99
Get the book · CA$ 34.99

This is a digital PDF book sent to your email: nothing is printed or shipped.