Study in Pictures🌐 English (Canada)
Carpenter Exam Illustrated

Digital book in PDF · read it on your phone or print it

Carpenter Exam Illustrated

67 pages for the Red Seal carpenter exam, one drawing per topic: construction drawings, 3-4-5 layout, footings in m³, floor and wall framing, stair risers, common rafters, the wall as layers. You look at the page and see where each number comes from.

  • 67 illustrated pages
  • English
  • 30-day guarantee
CA$ 34.99CA$ 79.99
Get the book · CA$ 34.99

Price shown for: Canada. In other countries, the checkout shows the price that applies there.

About this book

What it is

67 pages for the Red Seal carpenter exam, one drawing per topic: construction drawings, 3-4-5 layout, footings in m³, floor and wall framing, stair risers, common rafters, the wall as layers. You look at the page and see where each number comes from.

Who This Book Is For
  • You're finishing your apprenticeship
  • Your exam date is set
  • You've framed for years without the ticket
What it covers
  1. The Exam and the Basics
  2. Reading Construction Drawings
  3. Site Layout and Levelling
  4. Concrete and Formwork
  5. Floor and Wall Framing
  6. Stairs
  7. Roofs
  8. Building Envelope and Finishing
  9. Review Before the Exam
Language
English (Canada)
Pages
67
Format
Digital book in PDF · read it on your phone or print it
Price
CA$ 34.99 (Canada)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

3 m, 4 m, 5 m diagonal, then equal diagonals = a square building
3 m, 4 m, 5 m diagonal, then equal diagonals = a square building
30 m × 0.6 m × 0.2 m = 3.6 m³ of footing, before the allowance
30 m × 0.6 m × 0.2 m = 3.6 m³ of footing, before the allowance
Notch ≤ 1/3 depth near the support; hole ≤ 1/4 depth, 50 mm from edges
Notch ≤ 1/3 depth near the support; hole ≤ 1/4 depth, 50 mm from edges
13 treads × 260 mm = 3 380 mm of total run, with 1 950 mm of headroom
13 treads × 260 mm = 3 380 mm of total run, with 1 950 mm of headroom
90 m² plan at 6/12 = 100.6 m² of roof = 34 panels plus waste
90 m² plan at 6/12 = 100.6 m² of roof = 34 panels plus waste
Air barrier stops leaks; vapour barrier ≤ 60 ng/(Pa·s·m²) slows diffusion
Air barrier stops leaks; vapour barrier ≤ 60 ng/(Pa·s·m²) slows diffusion
3-4-5, HI, m³, risers and rafter length: each formula with its steps, ready to print
3-4-5, HI, m³, risers and rafter length: each formula with its steps, ready to print

Take a Look at the 9 Parts and 63 Topics

The Exam and the Basics

pp. 5-12
  1. How the Carpenter Exam Is Built
  2. Reading a Question With Four 'Right' Answers
  3. Job-Site Words vs Exam Words
  4. Working in Metric Without Converting
  5. Dimensional Lumber Sizes
  6. Engineered Wood at a Glance
  7. Site Safety: WHMIS, PPE and Fall Protection
  8. Ladders and Scaffolds

Reading Construction Drawings

pp. 13-20
  1. The Set of Drawings in Order
  2. Scales: 1:50, 1:100 and the Scale Rule
  3. Lines That Talk
  4. Symbols and Abbreviations
  5. Dimension Strings
  6. Elevations and Section Views
  7. Details and Schedules
  8. Specifications vs Drawings

Site Layout and Levelling

pp. 21-25
  1. Squaring a Building With 3-4-5
  2. Batter Boards and String Lines
  3. Builder's Level, Laser and Rod
  4. Elevations and Benchmarks
  5. Excavation and Frost

Concrete and Formwork

pp. 26-31
  1. Footings: Shape and Purpose
  2. Foundation Wall Forms
  3. Concrete Basics: Strength, Slump, Curing
  4. Estimating Concrete in m³
  5. Slabs on Grade
  6. Anchor Bolts and Sill Plates

Floor and Wall Framing

pp. 32-40
  1. The Floor System as a Cutaway
  2. Joist Layout at 400 mm o.c.
  3. Openings in Floors: Headers and Trimmers
  4. Notching and Drilling Joists
  5. Subfloor: Panels, Glue and Fastening
  6. Anatomy of a Wall
  7. Laying Out Plates
  8. Rough Openings and Headers
  9. Raising, Plumbing and Bracing Walls

Stairs

pp. 41-48
  1. Stair Words: Rise, Run, Tread, Nosing
  2. The Stair Limits in Part 9
  3. Calculating Risers in 4 Steps
  4. Total Run and Stairwell Length
  5. Laying Out a Stringer
  6. Dropping the Stringer
  7. Landings, Winders and Stair Shapes
  8. Handrails and Guards

Roofs

pp. 49-57
  1. Roof Types at a Glance
  2. Roof Slope: Rise Over Run
  3. Span, Run and Overhang
  4. Common Rafter Length in 3 Steps
  5. Plumb Cut, Seat Cut and Birdsmouth
  6. Hip, Valley and Jack Rafters
  7. Trusses: Handling and Bracing
  8. Roof Sheathing and Ventilation
  9. Estimating Sheathing and Roofing

Building Envelope and Finishing

pp. 58-63
  1. The Wall as Layers
  2. Air Barrier vs Vapour Barrier
  3. Insulation and RSI Values
  4. Windows and Doors: Flashing Sequence
  5. Exterior Cladding and Rain Screen
  6. Interior Finishing: Doors and Trim

Review Before the Exam

pp. 64-67
  1. Every Formula on One Page
  2. The Part 9 Numbers to Have at Hand
  3. Look-Alike Terms That Get Mixed Up
  4. Your Last-Week Checklist

Who This Book Is For

You're finishing your apprenticeship

Every topic from your training on its own drawn page, in metric, so the theory finally lines up with what you do on site.

Your exam date is set

The calculations in the same steps every time and the Part 9 numbers on one page, to review in the truck or at the kitchen table.

You've framed for years without the ticket

You already know the work. The book puts it in the exam's words, one drawing at a time, so four look-alike answers don't throw you.

Plus: 2 Free Books

Carpenter Practice Questions
BONUS 1

Carpenter Practice Questions

Exam-style multiple-choice questions with four options and the answer explained, so you practise the way the exam asks, not the way the job site talks.

15 Common Carpentry Mistakes, Drawn
BONUS 2

15 Common Carpentry Mistakes, Drawn

The most frequent framing, stair and envelope mistakes shown before and after, to review in minutes the night before.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've been framing for years but never wrote the exam?

Yes. It isn't a beginner's book: it takes what you already do on site and puts it in the exam's words, one drawing per topic, in metres and millimetres.

Where does the content come from?

It's written for Canada and in metric (mm, m, m³), not a US book in inches. Roof pitch stays as rise in 12, the way it's said on Canadian sites. The content follows the Red Seal Occupational Standard for Carpenter and the National Building Code of Canada 2020, Part 9, checked against provincial codes such as Ontario's, BC's and Alberta's. Some numbers, like minimum stair run, differ by province and code edition, so always check the one your province uses.

Is this official material?

No. It's an independent study book. It isn't affiliated with or endorsed by the Red Seal Program, the NRC or any provincial apprenticeship authority, and it doesn't reproduce code text or tables. It doesn't give you a certificate or count toward your hours: it's what you study with before you write the exam.

Does it replace my apprenticeship training or course?

No. It's a study and review companion. Your in-school training, your hours on site and your provincial code still come first.

Are the practice questions the ones on the exam?

No. They're written for this book, multiple choice with four options and the answer explained, so you practise the way the exam asks. They aren't official exam questions.

How do I get it?

The book and the 2 free books come as PDFs by email, to the address you enter at checkout.

Do I have to pay every month?

No. It's a one-time payment, with no subscription.

Can I have it on paper?

Yes. The PDF is printable: print it at home or at a print shop and keep it in the truck or your tool bag.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

CA$ 34.99CA$ 79.99
Get the book · CA$ 34.99

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic