Study in Pictures🌐 English (Australia)
Compact Tractor Illustrated

Digital book in PDF · read it on your phone or print it

Compact Tractor Illustrated

Made for Australian blocks, all in metric (kPa, centimetres, metres), with dams and fire danger days covered. Controls, start-up and shut-down, the three-point hitch, the PTO, the loader and ballast, slopes and dam walls, the slasher and owner maintenance. One topic per page: the drawing first, then what to remember.

  • 70 illustrated pages
  • English
  • 30-day guarantee
A$ 39A$ 89
Get the book · A$ 39

Price shown for: Australia. In other countries, the checkout shows the price that applies there.

About this book

What it is

Made for Australian blocks, all in metric (kPa, centimetres, metres), with dams and fire danger days covered. Controls, start-up and shut-down, the three-point hitch, the PTO, the loader and ballast, slopes and dam walls, the slasher and owner maintenance. One topic per page: the drawing first, then what to remember.

Who This Book Is For
  • You've just bought your first tractor
  • You've got a paddock to slash this weekend
  • You've run it for a few years
What it covers
  1. Know Your Machine
  2. Before You Turn the Key
  3. Start, Drive, Stop
  4. Three-Point Hitch and PTO
  5. Front Loader and Ballast
  6. Slopes, Dams and Rough Ground
  7. Implements on Your Block
  8. Owner-Level Maintenance
  9. Review and Quick Checks
Language
English (Australia)
Pages
70
Format
Digital book in PDF · read it on your phone or print it
Price
A$ 39 (Australia)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

PTO off, implements down, neutral, park brake, engine off and key out, check it's stopped.
PTO off, implements down, neutral, park brake, engine off and key out, check it's stopped.
Cat 1 pins: about 22 mm lower, 19 mm top. Check your manual.
Cat 1 pins: about 22 mm lower, 19 mm top. Check your manual.
PTO off, engine off, shaft stopped before you go near it.
PTO off, engine off, shaft stopped before you go near it.
Mulch to wet soil: same bucket, several times the weight. Check your rated lift.
Mulch to wet soil: same bucket, several times the weight. Check your rated lift.
Full bucket at the front, ballast at the back: the manual gives your minimum.
Full bucket at the front, ballast at the back: the manual gives your minimum.
Before mowing: walk, flag stumps, holes, pickets and wire, check power lines
Before mowing: walk, flag stumps, holes, pickets and wire, check power lines
Walk-around, fluids, tyres in kPa, fire check and controls as tick boxes to print.
Walk-around, fluids, tyres in kPa, fire check and controls as tick boxes to print.
A decision chart for slopes and loaders that ends in go, change the plan, or don't.
A decision chart for slopes and loaders that ends in go, change the plan, or don't.

Take a Look at the 9 Parts and 66 Topics

Know Your Machine

pp. 5-11
  1. Your compact tractor at a glance
  2. The ROPS and the seatbelt work as a pair
  3. The controls, colour by colour
  4. Gear or hydrostatic: how your tractor moves
  5. Reading the dash and warning lights
  6. The decals are the short version of the manual
  7. Which manual pages to read first

Before You Turn the Key

pp. 12-18
  1. The walk-around in 8 steps
  2. Fluid checks: engine oil, coolant, hydraulic oil
  3. Fuel: diesel, clean and topped up
  4. Tyre pressures in kPa
  5. Air filter and radiator screen
  6. Fire risk check before you work
  7. Dress for the tractor

Start, Drive, Stop

pp. 19-26
  1. Getting on and off: three points of contact
  2. The start-up routine in 7 steps
  3. Moving off and stopping smoothly
  4. Brake pedals: locked together or split
  5. Diff lock: when to use it and when to let go
  6. The shut-down routine in 6 steps
  7. Children, visitors and riders
  8. Driving on a public road

Three-Point Hitch and PTO

pp. 27-35
  1. The three-point hitch explained
  2. Hitch categories: will this implement fit?
  3. Hitching an implement in 8 steps
  4. The top link sets the angle
  5. Stabilisers and sway: centred and tight enough
  6. Position control vs draft control
  7. The PTO: 540 rpm and what it means
  8. PTO shaft length, guards and shear bolts
  9. PTO entanglement: the one second rule

Front Loader and Ballast

pp. 36-43
  1. Loader controls on one joystick
  2. Carry low, always
  3. Loader capacity and what dirt weighs
  4. Why you need rear ballast with a loader
  5. Ballast options: box, wheel weights, liquid tyres
  6. Never lift round bales or people with a bucket
  7. Fitting and removing the loader
  8. Hydraulic leaks: never use your hand

Slopes, Dams and Rough Ground

pp. 44-50
  1. Why tractors roll over
  2. Up and down, not across
  3. Loader on a slope: bucket uphill
  4. Dam walls and banks
  5. Gullies, wet ground and soft soil
  6. Rearward flip when towing or stuck
  7. Spotting hazards before you mow

Implements on Your Block

pp. 51-58
  1. The slasher: set-up in 5 steps
  2. Slashing safely: thrown objects and blade stops
  3. The rotary tiller (rotary hoe)
  4. The box blade: cut, carry, spread
  5. Rear blade: angle, tilt and offset
  6. The post hole digger
  7. Pallet forks and the bale spear
  8. Towing a trailer

Owner-Level Maintenance

pp. 59-65
  1. Hours, not kilometres
  2. Greasing: find every nipple
  3. Changing engine oil and filter
  4. Fuel filters and the water separator
  5. Battery and electrics
  6. Storing the tractor in the shed
  7. Where owner jobs end

Review and Quick Checks

pp. 66-70
  1. The 10 most common owner mistakes
  2. Pre-start checklist on one page
  3. Hitch and PTO checklist
  4. Slope and loader decisions at a glance
  5. Your tractor's numbers

Who This Book Is For

You've just bought your first tractor

You start with the parts and controls, then the start-up and shut-down routines, so the first hours on the seat aren't guesswork.

You've got a paddock to slash this weekend

Open the hitch, PTO and slasher pages in the shed and follow the numbered steps with the book beside you.

You've run it for a few years

The slope, loader and ballast pages show what you may never have been told, and the maintenance part keeps your owner jobs in order.

Plus: 2 Free Books

What Would You Do? 30 Paddock Scenarios
BONUS 1

What Would You Do? 30 Paddock Scenarios

Real situations on your block (a wet gully, a full bucket on a slope, a stubborn top link) to work through before you face them on the tractor.

Tractor Mistakes & Pre-Start Cards
BONUS 2

Tractor Mistakes & Pre-Start Cards

The most common owner mistakes drawn before and after, plus printable pre-start cards to keep in the cab or on the shed wall.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've only just bought my first tractor?

Yes. It starts with the parts and controls and builds up to ballast, implements and owner maintenance. If you've had your tractor for years, the slope, loader and PTO pages are still worth a look.

Where does the content come from?

From Safe Work Australia guidance on tractor safety, the farm tractor guides of the state WHS regulators and AS 1636 for roll-over protection. Every spec is marked to check against your own operator's manual, because each tractor is different.

Is it official material?

No. It's an independent illustrated book. It isn't affiliated with or endorsed by any regulator, standards body or tractor brand, and it names no brand or model.

Does it replace hands-on training?

No. It doesn't replace operator training, a dealer induction or your operator's manual. It helps you understand what you're doing and follow the routines in the right order.

Will it suit my tractor, and is it made for Australia?

It explains how any compact tractor works, gear or hydrostatic, whatever the brand, and every spec is marked to check against your own operator's manual. It's all metric (kPa, centimetres, metres, kilograms) and written for Australian blocks: paddocks, dams, gullies and fire danger days.

When and how does it arrive?

As a PDF by email, to the address you enter at checkout. The 2 bonus books come with it.

Do I have to pay every month?

No. It's a one-off payment, with no subscription.

Can I have it on paper?

Yes. Print it at home or at a print shop and keep it in the shed or on the workbench. The pre-start cards are made to print.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

A$ 39A$ 89
Get the book · A$ 39

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Forklift Licence Illustrated

An illustrated PDF guide for the forklift (Class LF) High Risk Work licence assessment in Australia. One topic per…

From A$ 39 A$ 89