Study in Pictures🌐 English (Australia)
Electrical Licence Illustrated

Digital book in PDF · read it on your phone or print it

Electrical Licence Illustrated

Safe isolation, the MEN system, RCDs, cable selection, voltage drop, maximum demand, the mandatory tests and bathroom zones. Every topic has its own page: the drawing first, then what you need to remember.

  • 68 illustrated pages
  • English
  • 30-day guarantee
A$ 39A$ 89
Get the book · A$ 39

Price shown for: Australia. In other countries, the checkout shows the price that applies there.

About this book

What it is

Safe isolation, the MEN system, RCDs, cable selection, voltage drop, maximum demand, the mandatory tests and bathroom zones. Every topic has its own page: the drawing first, then what you need to remember.

Who This Book Is For
  • You're in your fourth year
  • Your LEA or capstone is booked
  • You trained overseas and work as a TA
What it covers
  1. Your Assessment and This Book
  2. Working Safely
  3. Finding Your Way in AS/NZS 3000
  4. The MEN System and Earthing
  5. Protection and Switchgear
  6. Calculations, Worked Step by Step
  7. The Mandatory Tests to AS/NZS 3017
  8. Special Locations and Installations
  9. Final Revision
Language
English (Australia)
Pages
68
Format
Digital book in PDF · read it on your phone or print it
Price
A$ 39 (Australia)
Delivery
This is a digital PDF book sent to your email: nothing is printed or shipped.
30-Day Guarantee
30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full.

Look Inside the Book

Victoria's LEA: LET 2 h 15 min, SWP 50 min, LEP 4 h, and you must pass all three.
Victoria's LEA: LET 2 h 15 min, SWP 50 min, LEP 4 h, and you must pass all three.
Isolation in 5 moves, aligned with AS/NZS 4836:2023: prove dead before you touch
Isolation in 5 moves, aligned with AS/NZS 4836:2023: prove dead before you touch
Part 1 = Section 1 principles · Part 2 = Sections 2–8 deemed-to-comply methods
Part 1 = Section 1 principles · Part 2 = Sections 2–8 deemed-to-comply methods
Transformer, MEN link and main earth: the whole MEN system in one diagram.
Transformer, MEN link and main earth: the whole MEN system in one diagram.
RCBO vs RCD + MCBs, main switch identification, water heater isolator adjacent (4.8.2.3)
RCBO vs RCD + MCBs, main switch identification, water heater isolator adjacent (4.8.2.3)
V = I × R, P = V × I: a 2.4 kW heater on 230 V draws about 10.4 A.
V = I × R, P = V × I: a 2.4 kW heater on 230 V draws about 10.4 A.
Labelling 'shall', 1 m clearance, MEN at main board only, IP33 outdoors
Labelling 'shall', 1 m clearance, MEN at main board only, IP33 outdoors
Conductive parts over 100 mm within 1.25 m of the pool edge are bonded (cl. 5.6.2.6.5)
Conductive parts over 100 mm within 1.25 m of the pool edge are bonded (cl. 5.6.2.6.5)

Take a Look at the 9 Parts and 64 Topics

Your Assessment and This Book

pp. 5-9
  1. LEA, Capstone, Gap Training: Which One Is Yours
  2. What the Assessment Actually Looks At
  3. How to Read a Page of This Book
  4. Trained Overseas? What Changes in Australia
  5. Australian Colour Code and Terms

Working Safely

pp. 10-15
  1. Isolation in the Right Order
  2. Test – Prove – Test
  3. Lock Out, Tag Out
  4. Working Near Live Parts
  5. Choosing and Checking Your Instruments
  6. Electric Shock: What Happens and What You Do

Finding Your Way in AS/NZS 3000

pp. 16-22
  1. Part 1 and Part 2: How the Wiring Rules Are Built
  2. The 8 Sections on One Page
  3. The Appendices You Will Open Most
  4. Finding a Clause Fast
  5. Reading Clause Numbers and Exceptions
  6. Tabbing and Highlighting Your Standard
  7. Supply Voltages and Basic Terms

The MEN System and Earthing

pp. 23-31
  1. The MEN System in One Diagram
  2. Why the MEN Link Exists
  3. The Earth Electrode Is Not the Fault Path
  4. Main Earthing Conductor and Electrode
  5. Equipotential Bonding
  6. Protective Earthing Conductors in Final Subcircuits
  7. Lost Neutral: What You See and Why
  8. Multiple Switchboards and Submains
  9. MEN Errors the Assessor Looks For

Protection and Switchgear

pp. 32-39
  1. Overload vs Short Circuit vs Earth Fault
  2. Circuit Breaker Curves B, C and D
  3. Coordination: IB ≤ IN ≤ IZ
  4. RCDs: How They Detect a Fault
  5. Where RCDs Are Required
  6. RCBOs, Main Switches and Isolators
  7. Switchboard Layout and Labelling
  8. Wiring Systems and Installation Methods

Calculations, Worked Step by Step

pp. 40-47
  1. Ohm's Law and Power Without Mistakes
  2. Single Phase vs Three Phase Current
  3. Cable Selection in 5 Steps
  4. Derating Factors on One Page
  5. Voltage Drop: The 5% Limit
  6. Voltage Drop Worked Example
  7. Maximum Demand: Reading Appendix C
  8. Maximum Demand Worked Example: A House

The Mandatory Tests to AS/NZS 3017

pp. 48-57
  1. The Test Sequence in Order
  2. Visual Inspection Before Any Meter
  3. Continuity of the Main Earthing Conductor
  4. Continuity of Protective Earthing and Bonding
  5. Insulation Resistance
  6. Polarity
  7. Correct Circuit Connections
  8. Earth Fault-Loop Impedance
  9. RCD Operation
  10. Recording Results and Certificates

Special Locations and Installations

pp. 58-62
  1. Bathroom Zones 0, 1, 2 and 3
  2. Socket Outlets and Switches in Wet Areas
  3. Pools and Spas
  4. Outdoor and Underground Wiring
  5. Hot Water, Cooking and Air Conditioning Circuits

Final Revision

pp. 63-68
  1. The Mandatory Tests on One Page
  2. Pass Values and Limits to Have at Hand
  3. Most Frequent Errors in the Practical
  4. Fault-Finding in 4 Moves
  5. Clause Finder Cheat Sheet
  6. The Week Before Your Assessment

Who This Book Is For

You're in your fourth year

Every topic from your RTO notes on one drawn page, so revision after a full day on the tools actually sticks.

Your LEA or capstone is booked

The test sequence, the pass values and the clause finder to go over in the weeks before, in the same order every time.

You trained overseas and work as a TA

You already know the trade. The book shows you the MEN system, AS/NZS 3000 and the tests the way they're assessed in Australia.

Plus: 2 Free Books

Exam-Style Questions with Worked Answers
BONUS 1

Exam-Style Questions with Worked Answers

Practise theory and calculation questions like the ones in the assessment, with every answer explained and the clause to look up, so you find out what you don't know yet before exam day.

Printable Test Sequence Cards
BONUS 2

Printable Test Sequence Cards

One card per mandatory test, with the order, meter setting, lead connections and pass value, to print and revise in 5 minutes before a practical.

30-Day Guarantee

30-day guarantee: if a file doesn't open, if the content isn't what the product page describes, if you were charged twice or the email never arrived, write to us and we'll refund you in full. You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I trained overseas or I'm a fourth-year apprentice?

Yes. It's written for both. The standards are national, so the technical pages apply in every state and territory. The first part explains the Victorian LEA and the NSW and Queensland capstone; in other states, check your assessment format with your RTO or regulator.

Where does the content come from?

From the current AS/NZS 3000:2018 with its amendments, AS/NZS 3017, AS/NZS 3008.1.1 and AS/NZS 4836, with state information checked against public material from Energy Safe Victoria, NSW Fair Trading and the Queensland Electrical Safety Office. Clauses are referenced, not copied.

Is it official material?

No. It's an independent study book, not issued or endorsed by Standards Australia, any regulator, RTO or exam body. It doesn't give you a certificate and doesn't count towards your licence or gap training: it's for studying.

Does it replace my RTO training or gap training?

No. It goes alongside your training, supervised work and your own copy of AS/NZS 3000, which is not included. What it adds: each topic drawn on one page, every mandatory test with where the leads go and the pass value, and a clause finder that sends you straight to the right place in your own copy of the standard.

Are the practice questions the ones in the exam?

No. They're written for this book, in the style of theory and calculation questions, each with a worked answer and the clause to look up.

When and how does it arrive?

The book and the 2 bonus books arrive as PDFs by email.

Is it for beginners?

It's for apprentices close to their licence and candidates who already work on the tools. Each topic starts from the drawing, so you don't need it all clear already, but it assumes you're in training or in the trade.

Can I have it on paper?

Yes. It's a PDF you can print at home or at a print shop and take to work. The test sequence cards are made to be printed.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

A$ 39A$ 89
Get the book · A$ 39

This is a digital PDF book sent to your email: nothing is printed or shipped.

More books on this topic

Test and Tag Illustrated

Test and tag portable electrical equipment in the same order every time: visual inspection, earth continuity…

From A$ 39 A$ 89